The FastTech Thread For All FastTech Posts

[GraCnT]

Yay, vapemail! Got my 2nd X6, some Liqua Tiramisu and Coffee, and an X8 tank. But...the vapor production on the X8 isnt as great at all. Is there something I'm missing? I've tried the tank on every mod i have and while there vapor, its thin. Ive seen vids of Asian guys blowing crazy plumes with an X8 on 3.7 volts, and I'm beginning to wonder if they just cheated with a sub ohm coil for marketing the X8. Lol. Advice from X8 owners will be greatly appreciated.

~Restita

I had problems with this tank, then was able to figure it out and got it to work for a little. My carto coil is dead and just ordered some carto's from Vaporgod. They should be here tomorrow and I will let ya know if it is the carto they sent ya that produces little smoke. I so much want this thing to work.

As for FT, I am still waiting on them about the Evod heads. All they said to me was they need to check with the vendor. ummm ok. Pic's not good enough? No big deal.

Also, I am done ordering anything for a while. I am 60 days in and still in the RED, I need to get into the black. I just bought so much stuff and I have a addiction. August 7 will be my break even point then the saving's should begin. I think I have enough stuff to take me to next year but I know that will not happen. Something shinny is going to pop up and i will go "I need that" and just buy it. Someone call A&E and put me on intervention...lol.

Hi!
I have this tank as well and it hasn't performed well at all for me either. Dry hits,, flooded, leaky, misery!
I think it is the cartomizer too.... but... the cartos I have on hand are boges and they don't fit. Maybe I just have a bad bunch of cartos, or maybe just bot compatible fir this, they seem too wide.
I don't know.
I want this thing to work too!! If the cartos you ordered from vaporgod work I'll get some just so I can use this.
I'm looking forward to finding out, can you please let us know?
Thanks!

 

[BakuPeg]

Hello, just found fasttech as well and omg there goes my next paycheck... My husband currently has a provari and I was wanting to get him a mech for sub-ohm vaping. I was wondering if I could get some help.. I'm getting the black k100 without the kit, and I need to buy a couple pair of good batteries for it. I need two 18650's and two 18350's. There are just too many options up there for me to pick and get them right.

Also he has been using a smoke rba octo and squid for the past 3 weeks.
Are these similar? Do they work well? Has anyone tried them? Do they fit/work well on the k100?
$40.44 RDA Mini Rebuildable Dripping Atomizer (10-Pack / 1.0mL) 10-pack - ships with one of each color / 2.4
I probably wont get him all 10 colors, but it is temping

Thanks for your help

 

[BennyBlanco]

anyone have any thoughts on the liqua juice?

 

[Markh5682]

anyone have any thoughts on the liqua juice?

I bought a bottle of Liqua traditional tobacco, and it is excellent, I cannot vouch for any other flavours yet, but I'll be trying some out in my next order.

 

[Striker911]

Did a search in this thread and seen what people been saying about that T4. I got one a while back and all I taste is burnt rubber. Has anyone tried to rebuild one yet?

 

[niterider]

Just bought an Ody Clone for under $17.
$16.59 Oddy Clear Tank Rebuidable Atomizer - 1.8

 

[Nkayy]

Hangsen juicy peach has improved drastically with a few days of steeping. Wine is getting better but still not digging it as much as peach. The Ryu1 tastes too much like cigarettes to me. They really nailed the ashy burning taste.

Clearos still have a plasticky strange taste

 

[gully]

Just bought an Ody Clone for under $17.
$16.59 Oddy Clear Tank Rebuidable Atomizer - 1.8

Please post your impressions when you get it going,Im curious to see how well they seal.

 

[gully]

Hi!
I have this tank as well and it hasn't performed well at all for me either. Dry hits,, flooded, leaky, misery!
I think it is the cartomizer too.... but... the cartos I have on hand are boges and they don't fit. Maybe I just have a bad bunch of cartos, or maybe just bot compatible fir this, they seem too wide.
I don't know.
I want this thing to work too!! If the cartos you ordered from vaporgod work I'll get some just so I can use this.
I'm looking forward to finding out, can you please let us know?
Thanks!

I use Boges with the X8,they fit fine.

The included cartos are junk and will flood and produce hardly any vapour,not that they produce much vapour when they dont flood.

 

[Vchick]

I ordered one to try, liked better than the evod. I did thoroughly wash and rinse the individual pieces and dry burned the wick a bit, works great for me. I have rebuilt the original and it will also take the evod replacement coil

$3.11 T4 Electronic Cigarettes Round Mouth Atomizer (2.4mL) - green / 2.8

Did a search in this thread and seen what people been saying about that T4. I got one a while back and all I taste is burnt rubber. Has anyone tried to rebuild one yet?

 

[Nacon]

Ummmmm........like what?

Lol. Please don't answer my q with another q. Some products on fast tech have inconsistencies such as their really cheap eGo batts. Other ECFers answered my q. Been wanting an MVP and the best deal seems to be from here

 

[sbc83]

anyone have any thoughts on the liqua juice?

e-Liquid Reviews: LIQUA Premium Italian Flavors - YouTube

That explains some of them well. Everyones tastes are different.

 

[Ref Minor]

Lol. Please don't answer my q with another q. Some products on fast tech have inconsistencies such as their really cheap eGo batts. Other ECFers answered my q. Been wanting an MVP and the best deal seems to be from here

To be honest I thought your question was vague and was waiting for your response to Capt.Shay before I tried to answer.
With FastTech if they quote the manufacturers name they are genuine, if they don't they are clones. The MVP is original from all reports from people in this thread who have purchased it, it seems they have purchased them through a third party to get round Innokin's minimum pricing policy.

 

[Susaz]

Did a search in this thread and seen what people been saying about that T4. I got one a while back and all I taste is burnt rubber. Has anyone tried to rebuild one yet?

Buy some eVod heads, that's what I'm using mine with. The channel in the FT is different, narrower, that's why the possibility of rebuilding is near zero. It won't wick properly. Protank heads don't work here, although if you change the shaft they will.

 

[Susaz]

To be honest I thought your question was vague and was waiting for your response to Capt.Shay before I tried to answer.
With FastTech if they quote the manufacturers name they are genuine, if they don't they are clones. The MVP is original from all reports from people in this thread who have purchased it, it seems they have purchased them through a third party to get round Innokin's minimum pricing policy.

The SVD too, that's why I have high hopes that the Igo L and the Nimbus could be original too...

 

[Striker911]

I ordered one to try, liked better than the evod. I did thoroughly wash and rinse the individual pieces and dry burned the wick a bit, works great for me. I have rebuilt the original and it will also take the evod replacement coil

$3.11 T4 Electronic Cigarettes Round Mouth Atomizer (2.4mL) - green / 2.8

Just got that figured out since I had 3 evod heads. The evod always needs to be filled back up so I am happy that the heads work for the T4.

Buy some eVod heads, that's what I'm using mine with. The channel in the FT is different, narrower, that's why the possibility of rebuilding is near zero. It won't wick properly. Protank heads don't work here, although if you change the shaft they will.

Just got done rebuilding the t4 head. The only hard part was taking the top off so I could slide the new wick and coil in. Had to use a screw and a small hammer on that. In hindsight, its a really easy rebuild.

Lol. Please don't answer my q with another q. Some products on fast tech have inconsistencies such as their really cheap eGo batts. Other ECFers answered my q. Been wanting an MVP and the best deal seems to be from here

The MVP from FT is the one that has the switch that sticks out at the bottom. Not a huge issue since it still stands up but it does wobble some. The light around the fire button is also hard to see but not sure if its that way for all of them. This is the first one I have held in my hands. For the most part its a good PV for the money though. The output tested to 1/10th of a volt compared to the set voltage. It only changes under load. I made a review that should be up on YT in a day or so. Channels called Vaperswin.

 

[SeaTownLassy]

anyone have any thoughts on the liqua juice?

I've only tried Liqua coffee and tiramisu, and theyre great...not mindblowingly delicious, yet tasty. I think i'll enjoy them much more when I steep them a bit and get better cartos to go on my X8. I bought 5 of the sub-par carts...geez.

~Restita

 

[Butters78]

I bought a bottle of Liqua traditional tobacco, and it is excellent, I cannot vouch for any other flavours yet, but I'll be trying some out in my next order.

I'll order a bottle on your reccomendation. I vape mostly tobacco so excited to try it.

 

[Susaz]

Just got that figured out since I had 3 evod heads. The evod always needs to be filled back up so I am happy that the heads work for the T4.


Just got done rebuilding the t4 head. The only hard part was taking the top off so I could slide the new wick and coil in. Had to use a screw and a small hammer on that. In hindsight, its a really easy rebuild.



The MVP from FT is the one that has the switch that sticks out at the bottom. Not a huge issue since it still stands up but it does wobble some. The light around the fire button is also hard to see but not sure if its that way for all of them. This is the first one I have held in my hands. For the most part its a good PV for the money though. The output tested to 1/10th of a volt compared to the set voltage. It only changes under load. I made a review that should be up on YT in a day or so. Channels called Vaperswin.

I'm not saying it's not rebuildable... it is. But the channels where the wick sticks out are narrower, and not slanted. They don't wick like stock eVod coils, and it's a must for a chain vaper...

 

[InTheShade]

Someone who didnt know what that was could look at those pics and think it was MASSIVE! lol

Right, on their website it looks like an RBA for a giant... lol