The FastTech Thread For All FastTech Posts

Status
Not open for further replies.

Heavyrocker

Vaping Master
ECF Veteran
Dec 14, 2012
3,779
1,802
Toronto,Canada
Newbie here. I have 2 1300mah Spinners and I am looking to get either a Vamo V3 or an innokin SVD. Which one is better? I use Evods, ProTank, and a plain old 510 atty for dripping. Not into rebuildable anything or sub ohm stuff. Pretty basic vaper. Please let me know which is a better choice? Quality, and life of the pv. Thank you.

Would an Evic be a better choice?

Vamo blows the Evic away.
 

ebhomepc

Senior Member
ECF Veteran
Verified Member
Feb 21, 2013
227
101
41
United Kingdom
All I did was give it a nice bath with washing up liquid and went over the whole mod softly with the green part on a sponge wet to clean the finish up. I'm not sure what the correct name is lmao.

Sent from my Nexus 4 using Tapatalk 2
 

Attachments

  • uploadfromtaptalk1374942997024.jpg
    uploadfromtaptalk1374942997024.jpg
    19.7 KB · Views: 31

Myk

Vaping Master
ECF Veteran
Jan 1, 2009
4,889
10,658
IL, USA
Newbie here. I have 2 1300mah Spinners and I am looking to get either a Vamo V3 or an innokin SVD. Which one is better? I use Evods, ProTank, and a plain old 510 atty for dripping. Not into rebuildable anything or sub ohm stuff. Pretty basic vaper. Please let me know which is a better choice? Quality, and life of the pv. Thank you.

Would an Evic be a better choice?

I don't know about the SVD but between a Vamo and eVic if I could only have one it would be a Vamo. Vamo seems more bullet proof.
But I wasn't limited to one and the eVic saw more use because of the RVW settings (and it looked better with a Protank which my ADV needs because of tank cracking). Now I have backups of both and I feel a lot safer going out with nothing but eVics. But the Vamos are seeing more home use with RDAs, although I haven't given the eVic a chance with them yet until just now and although I think it's being pushed to its limits it was smoother with my dual coil.

I can't comment on the life. None of them have died yet. The original Vamo and eVic are only about a month old.

I think both the Vamo and SVD have a 5amp limit so that's a toss up. eVic is 2.5amp.
 

Markh5682

Senior Member
ECF Veteran
Verified Member
Jun 3, 2013
172
117
71
Chorley, Lancs, UK
Newbie here. I have 2 1300mah Spinners and I am looking to get either a Vamo V3 or an Innokin SVD. Which one is better? I use Evods, ProTank, and a plain old 510 atty for dripping. Not into rebuildable anything or sub ohm stuff. Pretty basic vaper. Please let me know which is a better choice? Quality, and life of the pv. Thank you.

Would an Evic be a better choice?

Both the vamo and SVD have similar spec and are well built, and both would serve your needs, The vamo V3 has a better screen and button layout than the SVD, but the SVD is better built and should last you longer, the Evic is good if you like a lot of gadgets and settings such as puff counters and computer software to configure it, having said that the evics overall spec is lower, 5v max instead of 6v, lower wattage and amps etc, the evic is not as solidly built and is easier to break, plus it's more expensive to buy.

All three are nice mods though, so pick the one that appeals the most to you.
 
Last edited:

Heavyrocker

Vaping Master
ECF Veteran
Dec 14, 2012
3,779
1,802
Toronto,Canada
I think I will give it a coat but not sure what to use at the minute :)

Sent from my Nexus 4 using Tapatalk 2

Its a good idea too keep the brass or possible lead in the brass from absorbing into you skin,BTW,,,you V3 looks like the best mod ive ever seen,do SS cable wick/RSST tank .BTW....olive oil keeps the shine too.

http://www.wikihow.com/Clean-Brass
 
Last edited:

Myk

Vaping Master
ECF Veteran
Jan 1, 2009
4,889
10,658
IL, USA
QUESTION: How the hell can Fasttech send stuff so cheap and so fast for free,im stumped?Will Fasstech ship me a combo chinese pork rice dinner with egg rolls?

Word is they have a HK post deal where if there's room they get on the plane, if there's not they don't. That gets them a cheaper rate and I figure is why my last packages waited around 3 days longer.


Both the vamo and SVD have similar spec and are well built, and both would serve your needs, The vamo V3 has a better screen and button layout than the SVD, but the SVD is better built and should last a you longer, the Evic is good if you like a lot of gadgets and settings such as puff counters and computer software to configure it, having said that the evics overall spec is lower, 5v max instead of 6v, lower wattage and amps etc, the evic is not as solidly built and is easier to break, plus it's more expensive to buy.


Don't forget the clock on the eVic. Now I don't have to feel left out when people check their cell phones to tell the time.
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
I would have replied, but this is exactly my impression.
Vamo/SVD choice was tough, I went back and forth for a while.

Both the vamo and SVD have similar spec and are well built, and both would serve your needs, The vamo V3 has a better screen and button layout than the SVD, but the SVD is better built and should last you longer, the Evic is good if you like a lot of gadgets and settings such as puff counters and computer software to configure it, having said that the evics overall spec is lower, 5v max instead of 6v, lower wattage and amps etc, the evic is not as solidly built and is easier to break, plus it's more expensive to buy.

All three are nice mods though, so pick the one that appeals the most to you.
 

discusfan

Full Member
May 1, 2013
48
41
62
Austin Texas
9 days to my freaking door, from China no less!!! Just got my Innokin SVD, batteries and charger! The clouds of vapor are amazing! The package, original shrink wrapped box, and the units themselves were in pristine condition! The tracking was spot on! I could not be happier about the entire process, price and quality of what I ordered! Fasttech is now my primary hardware provider!!!!!
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
UhOh!! (this is not me playing with photoshop - real headline yesterday - lol)
View attachment 235761

SAN FRANCISCO -- Authorities temporarily shut down the San Francisco-Oakland Bay Bridge after a suspicious device was found, snarling traffic on both sides of the crossing on a busy Friday afternoon.
Morgan said officials decided to close lanes and cleared all vehicles from the bridge...
...No further details on the device were released. Television news reports showed a bomb squad robot removing what appeared to be a small cylindrical object from the ground.


Probably a VAMO.
:laugh::laugh::laugh:
 

Heavyrocker

Vaping Master
ECF Veteran
Dec 14, 2012
3,779
1,802
Toronto,Canada
9 days to my freaking door, from China no less!!! Just got my Innokin SVD, batteries and charger! The clouds of vapor are amazing! The package, original shrink wrapped box, and the units themselves were in pristine condition! The tracking was spot on! I could not be happier about the entire process, price and quality of what I ordered! Fasttech is now my primary hardware provider!!!!!

Thats a record.
 

funkyZero

Super Member
ECF Veteran
Verified Member
Mar 11, 2009
485
736
Indianapolis, Indiana USA
Vamo blows the Evic away.

... not to mention the evic is a joyetech product whom I have decided to boycott and never buy from again... they jacked their prices almost double a week or 2 ago. although I'm not positive, I think it was in retaliation to fasttech selling stuff cheap. someone correct me if I'm wrong, but I'm not pleased with them at all regardless what their reasoning was.
They weren't content selling us 4 dollar batteries for 25 bucks so now they are doubling it.
Yea, I, I'm done with them. I'll sit and wait for someone to clone the rest of their stuff then buy it from fasttech
 

Cheechako

Vaping Master
ECF Veteran
Verified Member
Feb 11, 2012
5,192
39,314
Arizona
Delivered BUCKEYE, AZ 85326 July 26, 2013 12:17 pm
Arrival at Unit BUCKEYE, AZ 85326 July 26, 2013 6:45 am
Depart USPS Sort Facility PHOENIX, AZ 85043 July 26, 2013
Processed through USPS Sort Facility PHOENIX, AZ 85043 July 25, 2013 7:10 pm
Depart USPS Sort Facility SAN FRANCISCO, CA 94128 July 24, 2013
Processed through USPS Sort Facility SAN FRANCISCO, CA 94128 July 24, 2013 10:07 am
Processed Through Sort Facility HONG KONG AIR MAIL CENTRE, HONG KONG July 23, 2013 10:44 am
Acceptance HONG KONG July 22, 2013 10:41 am
I think my delivery was a record!
 
Status
Not open for further replies.

Users who are viewing this thread