- Status
Lawd somebody get me some kleenex, I think I am going to cry (that lavendar mech was really nice, lol)
They don't say that is the price for one.
I am a professional buyer by trade. If an online site requires an enquiry then they are pretty much trade. They might sell single items as samples. Enquire, but I bet they are looking to deal with companies and not individuals. Imagine the administrative nightmare of running a retail website via enquiries and responses etc for small value orders.
Button screwed in so its recessed inside the switch. Fires perfect, good throw despite screwing in so much.
Sanded down the top cap to the point where the 4 air flow channels in the 510 connection disappeared. I had to do this much sanding to have my mod sit with no gaps at all, as initally it was like my atty was leaning to one side as if i misthreaded. So got a bad break in terms of the top cap. But i think it was a rare case, and sanding made it perfectly flush fit for any atty.
I also had to sand down the delrin in the top cap to make the center pin further up in the 510 connection. None of my attys would fire until i shaved a mm off the delrin (atty side, not battey side)
I had some extra money in my paypal account, so I ordered an MVP.
Fastest delivery yet. Ordered on the 21st, shipped on the 22nd, got it today, the 27th.
Made another order on the 22nd and that one hasn't even shipped yet. LOL.
ETA - Even though it's not VW, I'm liking the MVP better than my Vamo. The MVP just feels and looks so solid.
Fastest delivery yet. Ordered on the 21st, shipped on the 22nd, got it today, the 27th.
Made another order on the 22nd and that one hasn't even shipped yet. LOL.
ETA - Even though it's not VW, I'm liking the MVP better than my Vamo. The MVP just feels and looks so solid.
Last edited:
I like my aluminum sentinel better still. No modding required on that, and i think it hits slightly harder. Aluminum > brass for conductivity. I found i prefer lighter weight mods after vaping on the diablo and sentinel v3 yday. Though the brass feels verysolid and not at all flimsy like parts of the sentinel. Also there is no "brass smell" on the diablo, at least for me its imperceivable.
I tried putting one in my cart and you are right, it doesn't have a way to check out or pay, just inquiry.
I might send them a note just to see what their policies are. Maybe they will sell single items but probably have a minimum dollar amount or something I would guess.
I don't think they care if you are a company or not as long as you meet minimums.
I was actually thinking about doing a wholesale order to get a bunch of stuff real cheap and spread the wealth around, but I have no outlet to sell the stuff. You can sell on ebay, but it's hit and miss... they can cancel your stuff because even though it's not really tobacco products, depending on what mood they are in they will take them down. I couldn't afford to get stuck with a couple grand worth of gear and no way to sell it off or let people know about it.
I'm pretty sure that'll even get you in trouble on ECF unless you are an approved reseller so I can't do that either.
Got one of these:
https://www.fasttech.com/products/1359506
The charger only came in the European plug, but it charges through the 510 USB charger.
3 volt settings, little better than an Ego...looks pretty sharp with a silver Evod on it!
https://www.fasttech.com/products/1359506
The charger only came in the European plug, but it charges through the 510 USB charger.
3 volt settings, little better than an Ego...looks pretty sharp with a silver Evod on it!
You can pick up a Euro to US converter plug. I got one off Ebay for my Phone that was only available overseas.
So I'm looking at getting this:
$18.11 V3 MOD Telescoping Electronic Cigarette Battery Compartment - golden at FastTech - Worldwide Free Shipping
and this:
$35.22 Ithaka Adjustable Rebuildable Atomizer (4.0mL) at FastTech - Worldwide Free Shipping
I'm wondering if anyone can suggest a battery for me? Also, should I pick up a Stomp or Kick as well? This is going to be my first mech and I'm curious about what else I should pick up with it.
$18.11 V3 MOD Telescoping Electronic Cigarette Battery Compartment - golden at FastTech - Worldwide Free Shipping
and this:
$35.22 Ithaka Adjustable Rebuildable Atomizer (4.0mL) at FastTech - Worldwide Free Shipping
I'm wondering if anyone can suggest a battery for me? Also, should I pick up a Stomp or Kick as well? This is going to be my first mech and I'm curious about what else I should pick up with it.
The tank: http://www.youtube.com/watch?v=RJiW2Bb6Z-8
http://www.youtube.com/watch?v=keWBdDVH8xc
The thing is the wire, you have to do both "non-resistive-wire" and "resistive-wire" as it has so far to travel to the connectors.
The Mod:
OK.
Last edited:
Well, if you have a different mech or tank to suggest, I would love to hear it.
The other tank I was looking at was this one:
$16.59 Oddy Clear Tank Rebuildable Atomizer - 1.8
The other tank I was looking at was this one:
$16.59 Oddy Clear Tank Rebuildable Atomizer - 1.8
REVIEW OF THE ODYSSEUS REPAIRABLE ATOMISER - YouTube
These tanks are not for me,too much hassle,the V3 Mod is awesome tho.
Get the RSST tank,best one out there for beginners and pros alike.
Last edited:
I guess that would probably be better then the other one since I am just getting into RBAs and don't want to have to mess with using two different types of wire. I have a RSST here, a AGR+, a protank, a double barrel, nova, and victory BBC, I'm just looking at getting something different for the tank and I always here people going on about the Ody, so I figured I would snag one, unless there is something better on fasttech that is different from what I already have.
As far as mechs go, I know nothing. I always see people talking about that Brass sential clone so that thanks the one I was shooting for unless someone wants to throw up a link to something better on fasttech.
Also, what else am I going to need to set up a mech? I have some 18650 batteries here that I use in the vamo, they are these ones:
https://www.fasttech.com/products/1141101
Can I use those in the mech? I see some people say to get protected batteries, some say to get a fuse, some say to get a kick/stomp, etc, etc. I'm just looking for a completely different setup then what I already have, which is a Vamo/Spinner with the tanks I listed.
I like my FT IGO-L. I don't know if I want to get more clones or try a real one but I do want more.
Even cheaper at ValueVapor. I think it ends up being $60 with "VIC" as the coupon code.
You will need a mutimeter too check batts and ohms on your coils,if you have a VV device you can use that too check,only use safe chemisry high drain batts,dont use ''protected'' batts,you dont need a kick with a mech if your running sub ohms,those batts you posted are the right ones too use,just ordered 2 more.
Last edited:
- Status
Similar threads
- Locked
