The FastTech Thread For All FastTech Posts

[Myk]

hopefully USPS is just sucking with tracking and I get it this week.

Very likely.
The package I got over a week ago still shows as stuck at my local PO, it was "stuck" in SF most of the time (more likely it was along with the package that was getting updated the whole time). I just got a Mail Innovations package that was a day behind in its USPS part of the tracking and it didn't register as delivered when I checked after it was.

 

[xtwosm0kesx]

Pretty sure fastech is about to blow my mind and get me my stuff in 7 days, order to door. (Obv Jinx)

Did jinx myself, but it was only 8 days order to door, still quite speedy imo. Improvement over last order's 14 days, maybe they're getting faster.

The stainless v3 Vamo battery cases are actually pretty nice! The spiral pattern is much less obtrusive than i expected.

 

[funkyZero]

Did jinx myself, but it was only 8 days order to door, still quite speedy imo. Improvement over last order's 14 days, maybe they're getting faster.

The stainless v3 Vamo battery cases are actually pretty nice! The spiral pattern is much less obtrusive than i expected.

Heck, I ordered stuff from Capellas and a couple other approved suppliers that take longer than that. Capellas took twice that long (literally).
I'd like to see some photos of their stock and shipping. I'll bet it's an absolute madhouse at fasttech right now.

 

[Ref Minor]

Feels like its about time to repeat my fast OR cheap mantra

 

[FnMag]

Can someone explain to me how to take apart the switch on the TVS & V3 mods? I can't figure it out to save my life.
I'm more concerned with the tvs as its firing while standing and I want to replace the spring.

 

[MVB1]

Ditto..Id like to know myself...... Also if there is an RSST or genesis type clone there...

This is their Genesis clone:

https://www.fasttech.com/products/1346104

(Despite several others with 'Genesis' in the name including a 'Genesis Nimbus' clone...)

I have this one. I like it a lot, still using the coil it came with (looks crappy, but vapes well), so I don't know how easy it will be to rebuild -- it is very small. Don't know about fit on a Reo Grand... but the OP was asking about a bottom feeder, not an RBA.

 

[screwu2man]

and Fasttech sucks me in again.....BLAH!

 

[Jerms]

This is their Genesis clone:

https://www.fasttech.com/products/1346104

(Despite several others with 'Genesis' in the name including a 'Genesis Nimbus' clone...)

I have this one. I like it a lot, still using the coil it came with (looks crappy, but vapes well), so I don't know how easy it will be to rebuild -- it is very small. Don't know about fit on a Reo Grand... but the OP was asking about a bottom feeder, not an RBA.

That's a Phoenix clone. Genesis is a tank style RBA.

Sent from my LGL55C using Tapatalk 2

 

[Markh5682]

I like the look of this one, it's supposed to have a glass tank too.

$15.99 ATTY Rebuildable Atomizer with Clear Tank (2.5mL) - 1*airhole / 1.0

Have added it to my wish list to go on my next order.

 

[MVB1]

That's a Phoenix clone. Genesis is a tank style RBA.

Oops! You're right. Brain fart on my part. (So many names, and FastTech does play mix & match with names, too)

I will say that the FT M4 is a very nice Phoenix clone.

 

[gully]

Anyone know if fast tech has any reo grand friendly bottom feeding atomizer?

I've tried most of the bottom feeders on FT but so far none will fit in a REO's juice well.

Someone drilled the post on this,

$3.97 M4 Electronic Cigarettes Round Mouth Solid Atomizer (Silver) - silver at FastTech - Worldwide Free Shipping

to make it a bottom feeder and used it on a REO.

 

[BakuPeg]

My red K101 has hit the san fran toilet. Thought that Maybe I'll get it this Saturday.. but no it left San fran and went right back in.

First-Class Package International Service
Processed through USPS Sort Facility
August 4, 2013, 7:44 am
SAN FRANCISCO, CA 94128
International Letter
Depart USPS Sort Facility
August 3, 2013
SAN FRANCISCO, CA 94128
Processed through USPS Sort Facility
August 3, 2013, 9:40 am
SAN FRANCISCO, CA 94128
Processed Through Sort Facility
August 2, 2013, 9:16 am
HONG KONG AIR MAIL CENTRE, HONG KONG
Acceptance
July 31, 2013, 1:21 pm
HONG KONG

 

[Rogan]

Fifth day goes by, no update. Either my Vamo is lost or USPS/Fasttech is playing one b*tch of a joke on me.

 

[Mackhaio5]

Anyone also order the trident Version C? Mine says it won't be shipped till the 6th.

 

[2coils]

My red K101 has hit the san fran toilet. Thought that Maybe I'll get it this Saturday.. but no it left San fran and went right back in.

First-Class Package International Service
Processed through USPS Sort Facility
August 4, 2013, 7:44 am
SAN FRANCISCO, CA 94128
International Letter
Depart USPS Sort Facility
August 3, 2013
SAN FRANCISCO, CA 94128
Processed through USPS Sort Facility
August 3, 2013, 9:40 am
SAN FRANCISCO, CA 94128
Processed Through Sort Facility
August 2, 2013, 9:16 am
HONG KONG AIR MAIL CENTRE, HONG KONG
Acceptance
July 31, 2013, 1:21 pm
HONG KONG

I found this exact thing happen to me. So naturally I hit the panic button. The kind folks here calmed me down and I found it in my mailbox a couple of days later!

 

[JD1]

........ PD was barely any better than Samsung ICR and it had the drastic curve I've seen claimed of B to say they weren't good. So far B is at 50%, I'm not seeing any drastic curve yet and it is where I would expect it to be for the rated mah.
As far as drain goes, maybe it matters with sub ohm and mechs but all the NCRs I've heard about have a large enough drain to power any thing I've run through a calculator. Unless you're running 30w and extreme sub ohm I really don't see what I've seen claimed is the B's limit to be an issue. .......

I just ordered a couple of the Sanyo 18500 batteries. I think the discharge rate on these is a little over 3 amps, but since my coils are in the 1.5 to 1.7 ohm range, I should be fine, correct?

 

[Fullknight]

I just ordered a couple of the Samsung 18500 batteries. I think the discharge rate on these is a little over 3 amps, but since my coils are in the 1.5 to 1.7 ohm range, I should be fine, correct?

Do you have a link to the Samsung batteries?


Sent from my iPhone using Tapatalk

 

[eazyweazy3]

Ordered my
MVP on the 31st. In San Fran on the 3rd! How long does it sit in San Fran on average?

Hearing packages make it to SF in 3-5 days time is good news to me.

I live in San Jose, about 50 miles south, so I am very optimistic about shipping time for me.

 

[damnjabbs]

Kanger protank mini $11
https://www.fasttech.com/products/1411/10004861/1423800

 

[Crocky]

I got the oddy clone a couple of weeks ago and have yet to use it or take it out of the package......