The FastTech Thread For All FastTech Posts

Status
Not open for further replies.

Capt.shay

Vaping Master
ECF Veteran
Verified Member
May 10, 2013
3,662
8,189
W. Ma. U.S.A.
At least my liquid will be well shaken.

And quite possibly stirred with the size of that bad boy!

Edit: "Typhoon Usagi Bears Down on Hong Kong, Threatens China: Hong Kong raised its third-highest storm signal with the city bracing for floods and hundreds of flights canceled, as Severe Typhoon Usagi made landfall in China."
 
Last edited:

bluecat

Vaping Master
ECF Veteran
Jun 22, 2012
3,489
3,658
Cincy
Decided to place my Oct order early to see if it gets here before the stranded order from the 6th. I just want SOMETHING!!

I am holding out till Oct. I really want to try that nemy. I finally got some cotton yarn. Hopefully I can keep my mind off of it buy trying the cotton yarn rebuilds. Knowing me I'll be vaping cotton... grrr
 

bluecat

Vaping Master
ECF Veteran
Jun 22, 2012
3,489
3,658
Cincy
Lol my little USB pass through did the same thing, I decided to gut the connector and save the pcb for a later use ( I had 2 of the tiny ones).

Result
zunugu7u.jpg


Little copper tubing and a few day of fiddling after work... Not pocket friendly at all, and my boss requested I no longer use it at work... But the degenerates that live in the building we are renovating cry about anything we do. Don't want to give anyone an excuse to run me off from another job site :)

Carefull, someone will clone that! Looks nice mate. :)
 
Hazzah!! I was just about to go to the local liquor store and purchase a V2. They have a chromed one with 2 18350 batterys and a no named charger for $65. To hold me as i have been having issues with ego twists picked up locally.

My Vamo V3 is on its way, Should of picked up some liquid it would have came pre steeped :blink:


First-Class Package International Service
Processed Through Sort Facility
September 22, 2013, 9:15 am

HONG KONG AIR MAIL CENTRE, HONG KONG
International Letter
Origin Post is Preparing Shipment

Acceptance
September 4, 2013, 11:15 am
HONG KONG
 

Jo Patterson

Senior Member
ECF Veteran
Verified Member
Jul 28, 2013
199
252
Reno, Nevada

Borescoped

Ultra Member
ECF Veteran
Verified Member
Jun 24, 2013
1,814
5,178
Minot, ND

JRudey

Super Member
ECF Veteran
Aug 20, 2013
601
395
68
Twin Cities
Oh yeah...a eGo-T atomizer head...even at 2.7Ω head...I do however recommend if you have an APV with resistance reading do a quick dry burn (to make sure its not DOA and to condition the coils) and check it to make sure it IS 2.7Ω or close to it...

I hear good things about those eGo-T heads...did you make sure you got some tanks and caps?

You can also clean them out like regular 510 atomizer heads in case you were interested

Thanks for the information. That YouTube video was real good. I have some cheap silicone drip tip covers

CE4 Silicone Drip Tip Covers

These drip tip covers fit the atomizer. It's a stretch to get them on, but it makes a real tight seal.
 

Wow1420

Ultra Member
ECF Veteran
Verified Member
Feb 17, 2013
2,333
4,145
Somewhere out there

Cavediver

Super Member
ECF Veteran
Verified Member
Apr 9, 2013
688
513
Buford, Ga
Oh I didn't think of using a "t" for the firing button... I have found that the pinky one I made is a little tough to fire under the current configuration... I may go with a bottom fire on my next attempt :)

FWIW, that's not a "T", it's a piece of 3/8 coupling tube, sanded and shaped to fit on a 3/4 coupling tube, and then soldered in place. Total PITA, but it was the only way I could make it work.
 

E_Cig Vicious

Senior Member
ECF Veteran
Verified Member
Apr 28, 2013
250
337
Gateway to the Midwest
My Fastech story for those who care to listen........Ordered nearly 400 bucks worth of stuff on July 31st. It wasn't packed or shipped until 8/8. Do I have the package yet? Nope. Apparently it just left customs on 9/18. This is after having been in chicago for like ever. I'd sure by happy if it actually showed up!

I have ordered a few times before and it has never taken this long!

Vapira

Same thing happened to me. I finally got an order this week which sat in Chicago since August 7th. I paid $46.55 in duties to receive my order. This crap never happened with large orders that went through San Fran that were well over $500.
Now, I have another order stuck in Chicago that was just over $100 of eGo cases. These bastages better not eff me again with their made up value bs.
 

E_Cig Vicious

Senior Member
ECF Veteran
Verified Member
Apr 28, 2013
250
337
Gateway to the Midwest
I just opened my first support ticket on FastTech:
--------------------------------------------------
Received 150mA chargers. Product description said it was 1000mA charger. Picture showed a 500mA. I expected either a 500mA or a 1000mA charger.

150mA is too weak. I need a higher output. Can you correct this problem? I ordered and received 5 chargers. All 5 chargers are incorrect. I need 5 chargers with at least 500mA output like the picture shown with the product description.

Sorry about the photo quality. I need a better camera.
-------------------------------------------------

Can anyone tell me what to expect next. It's a total investment of $7.60 and it's not like I won't be able to find a use for the 150mA chargers. It's the principle of the thing. I wanted the wall chargers to match-up to the eGo starter kits. Everything I've read says 500mA wall chargers are ideal for the eGo battery.

You sure you aren't reading it wrong? The ones that come with the usb eGo charging cable have
INPUT: AC.110-240V-50/60Hz 150mA
OUTPUT: DC.5V =500mA
 

JRudey

Super Member
ECF Veteran
Aug 20, 2013
601
395
68
Twin Cities
My last order of Vape gear hit SF today! Sqeeking in under the big storm.:vapor: Should be seeing it this week

My order #4 has bypassed my order #3. Order #3 is AWOL. Order #4 surfaced in Kearny, NJ today. Singapore Post keeps going to the Metro NYC area with my stuff. Each has arrived at a different USPS Sorting Facility.
 

JRudey

Super Member
ECF Veteran
Aug 20, 2013
601
395
68
Twin Cities

smitighe

Ultra Member
ECF Veteran
Verified Member
Jun 26, 2012
1,193
1,422
53
Baltimore
I am getting a bit ...... about my order. It still shows accepted in Hong Kong since the 6th. Not quite sure what the deal is. Has anyone experienced the same thing? What's the longest anyone has waited for an order. It's a 26 dollar order and I been patiently waiting to get it. Should I just be patient or get in touch with someone and see what's up with it?


Sent from my iPhone 5 using Tapatalk
 

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
Which of these do you think would be best for short you tube reviews and why ???

$6.45 Compact 1.3MP PC USB Webcam with Built-in Microphone at FastTech - Worldwide Free Shipping

$4.97 300KP 6-LED CMOS USB 2.0 Webcam with Microphone for Computer - black at FastTech - Worldwide Free Shipping

Mt Baker Vapor has a 10$ coupon if you post a review about a good interaction ... and they have 100 % vg juice.
first words in the description say it all 1.3MP vs a 300K...cmon
 
Status
Not open for further replies.

Users who are viewing this thread