Added these to the wish list.
$4.42 Invisible Anti-Bump Silicone Chest Pad at FastTech - Worldwide Free Shipping
$4.42 Invisible Anti-Bump Silicone Chest Pad at FastTech - Worldwide Free Shipping
- Status
Not FT related.
Just to show that sometimes things happen that are not the fault of the sender. This is a harddrive I'm returning. I promise I had nothing to do with this.
Good thing it's already broken.
"Amarillo, TX, United States 09/25/2013 10:00 P.M. Train derailment."
Four crew injured in Texas freight train collisions | Reuters
And UPS is generally good about updating tracking. This one took a couple days to show up.
Just to show that sometimes things happen that are not the fault of the sender. This is a harddrive I'm returning. I promise I had nothing to do with this.
Good thing it's already broken.
"Amarillo, TX, United States 09/25/2013 10:00 P.M. Train derailment."
Four crew injured in Texas freight train collisions | Reuters
And UPS is generally good about updating tracking. This one took a couple days to show up.
Man, I never though about what it takes to get packages through the system before. Seems there are lots of things that could go wrong during transport. I never though of the fact that people could get hurt or die as a result. I feel bad for the families of the two pilots that died because of a fire from li-on batteries. I do hope this isn't a trend
With my iClear 16 (dual coil, 2.1 ohm) I go nowhere near 5 volts. I use an Innokin SVD nowadays, but both dual and single coils work great with my old unregulated EGOs as well (though not as great as with the SVD
). I honestly don't notice that much difference between single coils and dual coils at the same ohms/volts. At 6 volts I'd get serious burn taste and probably burn out my coils, whether they be dual or single. My guess is that there's something wrong with the carto's if you don't get them to work properly at normal voltages.
You can request for the re-stocking item to be sent later. I've done that and FT were happy to oblige. Remember the Chinese holidays starting, though. You'll most likely see no movement of items before the 6th of next month.
Anyone.....
Does anybodies early Sept order that's still in "Acceptance" show that it's in transit? Mine shows 2/3 bars and says that it's in transit but my order that has been prepared for shipment shows 0/3 bars and is in "Pre-shipment" status
Just wondering why my older order shows progress on the shipping tracker..
Does anybodies early Sept order that's still in "Acceptance" show that it's in transit? Mine shows 2/3 bars and says that it's in transit but my order that has been prepared for shipment shows 0/3 bars and is in "Pre-shipment" status
Just wondering why my older order shows progress on the shipping tracker..
Last edited:
Both orders were shipped on the 12th. Looks like the first one is in transit. Hope so.
I've just taken delivery of these Mini Protank clones from Fasttech https://www.fasttech.com/products/1439205 at that price I thought I'd take a punt, having already smashed 2 version 1 minis. So if anyone is wondering if they're any good, I can happily report that they're spot on! Build quality is superb, every bit as good as the original, sure the tank is Polycarbon not glass, but nice quality and better if you're as careless as me! The coil they come with (just the one fitted) is maybe not as well wound as the Kanger originals, no gap in the middle, but they work just fine and I recoil mine quite a lot anyway, no worries if you don't, these take original Kanger replacement atomisers too. Great value and more hopefully more robust than the originals, yet another bargain buy from Fasttech. Might have to try their version of it's big brother now.
Ahhhhhh, I have orders all the way back to August 28th that are at a standstill. Since I am now at 4 weeks and have a total of 5 orders - no, 6 because one was split, I've gone ahead and gotten some things elsewhere =] My FT order will be a nice surprise when it arrives and my juice will be magnificently steeped LOL Some of it was to PIF, but she'll just have to wait it out
I know the difference. The people I'm helping out don't have much cash. One couple doesn't even own a credit card.
With my iClear 16 (dual coil, 2.1 ohm) I go nowhere near 5 volts. I use an Innokin SVD nowadays, but both dual and single coils work great with my old unregulated EGOs as well (though not as great as with the SVD
I wish my Dual Coil cartos were 2.1 ohms. Unfortunately, I foolishly bought the 2.5 ohms.
Here's the chart:
Last edited:
Glass Mini pro tank https://www.fasttech.com/p/1437023 is doing well. So is the Evod battery https://www.fasttech.com/p/1422602. This battery seems to be better made than the typical FT cheap egos. It's also regulated to 3.8 volts. Most cheap egos start at 4.2 volts and gradually drop until then reach shutoff point under 3.6 volts. Regulated means a more consistent vape. Really enjoying the pair.
My KWX10 https://www.fasttech.com/p/1442701 finally escaped from Hong Kong (Escape from Hong Kong should be a movie title) I'm looking forward to trying it in a few days (nearly a month after ordering). Anyone else try one of these yet?
My KWX10 https://www.fasttech.com/p/1442701 finally escaped from Hong Kong (Escape from Hong Kong should be a movie title) I'm looking forward to trying it in a few days (nearly a month after ordering). Anyone else try one of these yet?
WooHoo! My K100, ordered on the 19th, has been processed thru USPS sort facility in San Fran 
Product & Tracking Information
Postal Product:
First-Class Package International Service
Features:
International Letter
DATE & TIME
STATUS OF ITEM
LOCATION
September 28, 2013 , 10:54 am
Processed through USPS Sort Facility
SAN FRANCISCO, CA 94128
Origin Post is Preparing Shipment
September 27, 2013 , 1:17 pm
Processed Through Sort Facility
HONG KONG AIR MAIL CENTRE, HONG KONG
September 26, 2013 , 12:02 pm
Acceptance
HONG KONG
Product & Tracking Information
Postal Product:
First-Class Package International Service
Features:
International Letter
DATE & TIME
STATUS OF ITEM
LOCATION
September 28, 2013 , 10:54 am
Processed through USPS Sort Facility
SAN FRANCISCO, CA 94128
Origin Post is Preparing Shipment
September 27, 2013 , 1:17 pm
Processed Through Sort Facility
HONG KONG AIR MAIL CENTRE, HONG KONG
September 26, 2013 , 12:02 pm
Acceptance
HONG KONG
My most recent order with fast tech i think got lost
ordered on 8/31
Finally shipped on 9/9
Left H/k on 9/19
Made it to local hub on 9/23
and there is has sat
Usually i get packages the same or next day from the hub. It is only about 10 miles from the house.
ordered on 8/31
Finally shipped on 9/9
Left H/k on 9/19
Made it to local hub on 9/23
and there is has sat
Usually i get packages the same or next day from the hub. It is only about 10 miles from the house.
Just put in another order with F.T. This time for a usb pass through....gotta....stop...
The free one is the recommended one if your ticket is over $15.
"USPS First-Class FREE (5 to 8 days in transit typical) - (5 to 8 days in transit typical) - *note recent aviation security scan delays"
Anyone.....
Does anybodies early Sept order that's still in "Acceptance" show that it's in transit? Mine shows 2/3 bars and says that it's in transit but my order that has been prepared for shipment shows 0/3 bars and is in "Pre-shipment" status
Just wondering why my older order shows progress on the shipping tracker..
Right there with you. Order sitting in acceptance since 08/31. USPS website says In-Transit with 2/3 bar full. No movement whatsoever. SUUUUXXXXXXXXX!!!!!!
What I don't understand though is why the order that has had an update still doesn't have bars. Almost like the old order is moving but w/o updates. That's what I want to think.
- Status
Similar threads
- Locked
