The FastTech Thread For All FastTech Posts

[funkyZero]

I've been hitting on the Trident that I got today ( https://www.fasttech.com/products/1418702 ).
I have to say, this is my favorite rda so far. LOTS of airflow option already drilled on this one. Build quality seems excellent although I haven't tried a re-coil yet. The post screws and everything look pretty good though.
If you are into drippers, I highly recommend this one. I like it a LOT better than the Igo-L ( https://www.fasttech.com/p/1400500 ) I got last week... although I've stolen the drip tip from the Igo-L, I like it better.

 

[bluecat]

I got another Vamo, a nitecore charger and 2 panasonic 18650 in 8days to Central Cali. Question to all the other fastech buyers. i noticed both batts got HOT when i had them in the charger for about an hr. I felt the one efest i had in for a couple hours in my efest intellicharger and it wasnt even warm. Im gonna put the 2 panasonics in the efest tonite to finish the charge and see if they get hot again. Anyone else experience this with the nitecore or those batts??

My pannys get warm and so does the nitecore i2. They haven't been hot. I have read warm is okay.

 

[Scope666]

I've been hitting on the Trident that I got today ( https://www.fasttech.com/products/1418702 ).
I have to say, this is my favorite rda so far. LOTS of airflow option already drilled on this one. Build quality seems excellent although I haven't tried a re-coil yet. The post screws and everything look pretty good though.
If you are into drippers, I highly recommend this one. I like it a LOT better than the Igo-L ( https://www.fasttech.com/p/1400500 ) I got last week... although I've stolen the drip tip from the Igo-L, I like it better.

Hey, does that Trident have holes in the posts so you don't have to wrap the wire under a screw? That seems like it would be a lot easier (have the IGO-L right now myself)

thx!

 

[bluecat]

I have replaced the needle on my filling bottle with a longer one from a syringe, it fills up no problem with that as the needle will reach the bottom of the tank with a bit of needle to spare above the fill hole, so the air can still escape.

Aye mate. The needle on the needle bottles from fastech are larger than the ones i got from myfreedomsmokes. I just looked at them. The ones from MFS worked great.

 

[funkyZero]

Hey, does that Trident have holes in the posts so you don't have to wrap the wire under a screw? That seems like it would be a lot easier (have the IGO-L right now myself)

thx!

No, there are no holes that I can see. They are more like caps than screws though. You can see it pretty well in the photos on the Fasttech site. It actually *looks* like it may be a bigger pain that top screws, but I haven't gone down that road yet so I can't say for sure. IF there are holes, they are at the bottom of the caps but I don't want to take it apart and ruin the coil right now... I'm enjoying it too much to break it and have to fix it.

 

[Scope666]

No, there are no holes that I can see. They are more like caps than screws though. You can see it pretty well in the photos on the Fasttech site. It actually *looks* like it may be a bigger pain that top screws, but I haven't gone down that road yet so I can't say for sure. IF there are holes, they are at the bottom of the caps but I don't want to take it apart and ruin the coil right now... I'm enjoying it too much to break it and have to fix it.

Cool ... thanks for checking. Whenever you do end up making a new coil, let me know what you think of it (as far as how hard to catch the wires)


Thanks again!

 

[funkyZero]

Yup, Liqua Berry Mix, for me it's awful there is one of the "berries" in the mix that gives an odd flavor idk. All i can say is that juicy peach made it to my top 3

I was the same way. I got the Liqua Berry Mix and I tried REAL hard to like it, but it just had this weird flavor that I couldn't quite put my finger on. I ALMOST threw it in the trash but somehow it ended up in my box-o-juice junk pile.
You guys got me curious so I dug it out and put it in a brand new iclear 16.. wow. It's actually damn good now. I think I've had it in the box for like 3 weeks or something?
I can get into this I think. That weird aftertaste it used to have is almost completely gone. Still lingering slightly, but totally vapable now.
I'm going to leave it for a few more weeks and see if it continues to improve.

 

[JamezC]

Im currently waiting on my MVP, Kanger Protank, ego to 510 adapter, annd 3 bottles of Hangsen e-liquid to try. Gotta love they're prices, all that for under $60

 

[dr g]

My pannys get warm

twss

 

[Ta2ooz]

First-Class Package International Service
Processed through USPS Sort Facility
August 20, 2013, 11:21 am
SAN FRANCISCO, CA 94128
International Letter
Processed Through Sort Facility
August 19, 2013, 11:22 am
HONG KONG AIR MAIL CENTRE, HONG KONG
Acceptance
August 16, 2013, 12:15 pm
HONG KONG

Can't wait to get my Protank and Cartomizer tank...

And also..

View attachment 243863

WOOOHOOOOO!

What is that little wheeled piece of fun?

 

[Rogan]

What is that little wheeled piece of fun?

THE WORLDS SMALLEST SOLAR POWER CAR

Not one review, not one discussion on FT, so I'm assuming I'm one of the first to buy it LOL.

 

[Chablo]

Anyone order a V3 or itaste svd? Any problems or issues? Worth it?

Sent from my LGMS659 using Tapatalk 4

 

[Rogan]

Anyone order a V3 or itaste svd? Any problems or issues? Worth it?

Sent from my LGMS659 using Tapatalk 4

I've gotten a V2 and no problems, USPS didn't update until I got it, though. 9 days to NJ, not bad.

 

[Chablo]

I've gotten a V2 and no problems, USPS didn't update until I got it, though. 9 days to NJ, not bad.

Is the mod itself decent or does it feel cheap? How's the threading? I'm looking to order my first mech mod from there and I'm iffy about spending over $15 from a Chinese company.

Sent from my LGMS659 using Tapatalk 4

 

[Myrany]

I've gotten a V2 and no problems, USPS didn't update until I got it, though. 9 days to NJ, not bad.

Do you mean the vamo V3 or the sentinel clone V3 ?

I have the sentinel V3 clone

My only complaint is the bottom button keeps loosening up and I have to keep tightening it. Otherwise it is a great little mod.

 

[Shamus9]

My K100 is still showing "Acceptance" in HK but no movement since 8/12.
Now I'm starting to get a wee bit worried.
On the other hand, my IGO L arrived today
I'm getting ready to play with it now

Mine said Acceptance on the 15th and nothing since.

 

[Rogan]

Do you mean the vamo V3 or the sentinel clone V3 ?

I have the sentinel V3 clone

My only complaint is the bottom button keeps loosening up and I have to keep tightening it. Otherwise it is a great little mod.

I meant Vamo, I assumed he meant Vamo because he brought up the SVD .

@Chablo

Not sure if you meant Vamo, but the build quality is great, sturdy as hell and no rattle with 2 18350s.

 

[E_Cig Vicious]

Is the mod itself decent or does it feel cheap? How's the threading? I'm looking to order my first mech mod from there and I'm iffy about spending over $15 from a Chinese company.

Sent from my LGMS659 using Tapatalk 4

Not sure what you have to go by in comparison but it's a quality piece and in general Innokin is all pro in this department and 520 pages of this thread says you are good to go ordering from FT.

 

[Scope666]

Anyone order a V3 or itaste svd? Any problems or issues? Worth it?

Sent from my LGMS659 using Tapatalk 4

I got the basic SVD (body only) from FT and I'm quite happy with it ... here's a pic if it helps:

 

[Heavyrocker]

Do you mean the vamo V3 or the sentinel clone V3 ?

I have the sentinel V3 clone

My only complaint is the bottom button keeps loosening up and I have to keep tightening it. Otherwise it is a great little mod.

http://www.e-cigarette-forum.com/fo...-sentinel-mechanical-mod-37.html#post10446985