The FastTech Thread For All FastTech Posts

[DancingHeretik]

Well I got my nimbus clone today finally! This thing is pretty beast, though! The pics showed the posts as brass, but I was pleasantly suprised to see they were in fact stainless. Pulled out the stock wick and tossed the set screws in the posts and replaced them with the 3 phillips head screws I had for an Igo-l (that I never use because of bad 510 threads), threw on a 1.7Ω coil with 1.5mm Ekowool doubled up, and I couldn't be happier with this little $6 atty!

View attachment 221657View attachment 221658​

Airhole is a little small for my taste, but I'm getting another one soon. This thing will look BOSS on my ELA (when it gets here) with brass accents and homemade brass driptip! Although the tip I have on there now matches up pretty nicely!

Link please!

 

[NakiFantaki]

Just ordered a 7 pack of evods.

Sent from my HTC VLE_U using Tapatalk 2

 

[DancingHeretik]

Do I remember correctly that fasttech will pay for shipping when you return an item?

 

[skyztheLynnit]

Do I remember correctly that Fasttech will pay for shipping when you return an item?

Only if it's DOA " Dead on Arrival (DOA)

FastTech guarantees safe delivery of your orders. We exchange all damaged items. FastTech reimburses return shipping charges.

Contact us for a RMA, within 5 days of delivery, and ship products back via the least expensive method."

From here: Shipping and Refund: FastTech

 

[Punkndrublic]

I ordered some wick, liqua berry, kanger protank, ego cone adapter and a "tobacco oil filler" aka juice bottle with a needle tip. Good times. Just waiting until they get the eVic control head.

 

[nipurava]

For those interested on MVP battery life i charged mine yesterday. I used it almost exclusively from thursday morning until yesterday night, i decided to charge but it wasn't even showing yellow(820 puffs on the counter) amazing battery life. I love my SVD but the MVP has won my heart

does the mvp wobble when you put in on a table?
i know that the power button to usb charger makes it wobble just wanted to know if they have changed it.

 

[nipurava]

I ordered some wick, liqua berry, kanger protank, ego cone adapter and a "tobacco oil filler" aka juice bottle with a needle tip. Good times. Just waiting until they get the eVic control head.

dont forget to give a review of the wick.
as it is fiberglass just wanted to know how it performs

 

[shannannagans]

I ordered two X6s - one for the boy, one for me; one of the pretty purple/teal/yellow drip tips; finally, a protank; and I've decided to try the T4.

 

[Punkndrublic]

dont forget to give a review of the wick.
as it is fiberglass just wanted to know how it performs

I totally will

 

[gully]

Link please!

$6.14 V5 Electronic Cigarette Round Mouth Detachable Dripping Atomizer - 1.0

 

[nipurava]

I ordered two X6s - one for the boy, one for me; one of the pretty purple/teal/yellow drip tips; finally, a protank; and I've decided to try the T4.

hey have seen the in pics the x8 carto tank does not have the screw.
if i were you i would have conformed if it comes with the screw to tighten the cartomizer.
i am saying this because i have seen a reply from the staff that you would get what you see in the pictures

 

[gully]

The x8's I've had from kits came without the bottom screws and the ones on their own came with bottom screws.

$7.47 Authentic X8 2.5ml Electronic Cigarette Atomizer at FastTech - Worldwide Free Shipping

 

[Cjax]

Ha! Thanx gully! I was just about to do that! They also have a Cyclone clone (Cy-clone?) that looks pretty nice too. Doesn't have the 3 post set up though. I may get one of these and try drilling out the center for my Reo.
$7.01 YK1 KTS Stainless Steel Electronic Cigarette Atomizer at FastTech - Worldwide Free Shipping

 

[nipurava]

Ha! Thanx gully! I was just about to do that! They also have a Cyclone clone (Cy-clone?) that looks pretty nice too. Doesn't have the 3 post set up though. I may get one of these and try drilling out the center for my Reo.
$7.01 YK1 KTS Stainless Steel Electronic Cigarette Atomizer at FastTech - Worldwide Free Shipping

wow this atty will really look sexy on a ego twist

 

[shannannagans]

hey have seen the in pics the x8 carto tank does not have the screw.
if i were you i would have conformed if it comes with the screw to tighten the cartomizer.
i am saying this because i have seen a reply from the staff that you would get what you see in the pictures

I actually have an old one that I destroyed (oh, the early days of vaping) with cinnamon fireball eliquid, so I just plan to use the screws from that. Thank you though!

 

[shannannagans]

The x8's I've had from kits came without the bottom screws and the ones on their own came with bottom screws.

$7.47 Authentic X8 2.5ml Electronic Cigarette Atomizer at FastTech - Worldwide Free Shipping

Thank you for letting me know!

 

[puchox]

does the mvp wobble when you put in on a table?
i know that the power button to usb charger makes it wobble just wanted to know if they have changed it.

It does wobble but little bit, i don't think they addressed this problem with this revision...
probably for the next mvp tho

 

[gully]

Ha! Thanx gully! I was just about to do that! They also have a Cyclone clone (Cy-clone?) that looks pretty nice too. Doesn't have the 3 post set up though. I may get one of these and try drilling out the center for my Reo.
$7.01 YK1 KTS Stainless Steel Electronic Cigarette Atomizer at FastTech - Worldwide Free Shipping

I've been looking at those too.

I use RMA2's on my REO's but am starting to feel like Im sucking my thumb and dont like long driptips so am interested in how you get on with this.

 

[Cjax]

I've been looking at those too.

I use RMA2's on my REO's but am starting to feel like Im sucking my thumb and dont like long driptips so am interested in how you get on with this.

It helps if you have access to a drillpress or a lathe. Smallest bit I can find straight through the center, but it's gotta be smaller than the threading inside the positive post. Then one more hole underneath the existing hole for the coil on the same post for juice to flow out. Bada-bing, bada- boom, a new BF atty!

 

[nipurava]

guys found a Heat Shrink Wrap to wrap the battery if at all they loose their wrapping.