The FastTech Thread For All FastTech Posts

[puchox]

Thank you members that replied to me

So registered mail is the fastest option to use? or regular?

Wait for Eric to give you the correct answer, he had the same problem as you. I think he said how he solved it in another page on this thread.

 

[donesmokin]

Thank you members that replied to me

So registered mail is the fastest option to use? or regular?

I used regular and it got here in 8 days.

 

[Skypea]

Thanks puchox. That will work. Oh, I know dripping is for me, been doing it for 2 years but old school style on a 510 atty! lol well until about a month ago when I got the rebuildables. Maybe tomorrow morning I will break out the supplies and give it a go. The only thing is that I have 32 nichrome when I ordered 32 kanthal. So i'll have to study up on the difference. I found an awesome video on rebuilding the protank coils too. I'm already a pro at cleaning them and have taken them all the way apart to see what makes them tick so that should be easy for me to do also. Wishful thinking.

 

[puchox]

I tried to rebuild a protank head yesterday with SS mesh, ended up with a 1.7 coil but it tasted burnt and it also flooded -.-

I'd rather stick with my i16's i like how they vape much more than the protank and at 3 a pop even if they lasted a week its fine to me

 

[nipurava]

I tried to rebuild a protank head yesterday with SS mesh, ended up with a 1.7 coil but it tasted burnt and it also flooded -.-

I'd rather stick with my i16's i like how they vape much more than the protank and at 3 a pop even if they lasted a week its fine to me

i recoil my t3 with 1mm hemp wick by removing the silica wick and sliding hemp wick inside the stock coil and put another 1mm wick as flavor wick.it vapes fantastic and the flavor is on par with silica.
i will do the same with the evods from FT

 

[Dusif]

Im considering buying a kts mech mod and a cobra genesis style atomizer.. Just to try sub ohms and long drags

 

[nipurava]

Im considering buying a kts mech mod and a cobra genesis style atomizer.. Just to try sub ohms and long drags

be careful with the battery's you use.
don't exceed the amp limitation

 

[brock957]

https://www.fasttech.com/products/0/10004946/1384100-did-v2-mini-rebuildable-atomizer-for-diy-18ml
what are your thoughts on this?

 

[Dusif]

I

be careful with the battery's you use.
don't exceed the amp limitation

Youre gonna have to explain that a little bit?

 

[nipurava]

I

Youre gonna have to explain that a little bit?

it cant be explained in a little bit
what kind of batteries do you have?

safety in sub ohm vaping depends on the what kind of battery you use.
for ex if you are using 0.6ohm coil on freshly charged 4.2v battery the battery is discharging at 7A(Amps = Volts / Ohms)
so the battery amp limitation should be at least 10A for safety concerns.

pls do a proper research regarding the batteries to be used for sub ohm vaping

 

[Glen Snyder]

I actually realized it wasn't right after I posted. I guess just turning it slightly allowed it to be where it needed to...

Those insulators are pretty soft when they're new. An educated guess may be that when the pin was inserted it slightly compressed the insulator and when you turned it with the screwdriver it was enough to let the insulator go to its intended size. btw, the first time I messed with my T3 I thought it was a threaded screw also

 

[Glen Snyder]

My stuff has been sitting in Burlingame for 3 days now, you'd think it'd be faster sense I live in the same state.

Mine looked like it was sitting in Burlingame also because there was only the one 'Processed through...' entry on the tracking referring to that facility. After 4 days the tracking said Processed through Tampa. So it never did say anything about leaving Burlingame unless that's what they meant by "processed through".

 

[kiwivap]

https://www.fasttech.com/products/0/10004946/1384100-did-v2-mini-rebuildable-atomizer-for-diy-18ml
what are your thoughts on this?

Edit - now that I've looked at it properly. Haven't tried one of those clones. Its not that cheap - you can pick up Phoenix clones for that.

 

[nipurava]

https://www.fasttech.com/products/0/10004946/1384100-did-v2-mini-rebuildable-atomizer-for-diy-18ml
what are your thoughts on this?

i dont own this one but seen a lot of people mentioning that it a good genesis type atty best for new vapers how wants to try genesis style atty.
there are other cheap genesis attys(aga-t2,RSST) but this is the cheapest one.

 

[brock957]

Thanks guys for replying. Interested because it come with ss mesh and wire. I might just get it my next order.

 

[Glen Snyder]

Buy three Vamos and run in lightsaber mode!

Just for kicks I put the big tube on mine with 18350's stacked to see what that was like. Turns out it could probably get you busted for carrying a concealed weapon. I'll stick to the short mode

 

[ericbnc]

Worth noting to the haters out there, but I found FT through Smokey Joe's blog - he is respected here on ECF...

 

[Dusif]

it cant be explained in a little bit
what kind of batteries do you have?

safety in sub ohm vaping depends on the what kind of battery you use.
for ex if you are using 0.6ohm coil on freshly charged 4.2v battery the battery is discharging at 7A(Amps = Volts / Ohms)
so the battery amp limitation should be at least 10A for safety concerns.

pls do a proper research regarding the batteries to be used for sub ohm vaping

So how do i find out?
It will be my first mech mod so i will need some guideing

 

[nipurava]

So how do i find out?
It will be my first mech mod so i will need some guideing

what batteries do you have?

 

[Butters78]

My kamry protank clone should be here today.

My brother is visiting so I'll have time to fill it and use it for a while, not post much. But I will take pics and share so you guys can see if it's worth the 7 bucks or whatever it is.