The Gnarly

[Nurzrachit]

Okay, been at it again.

Basically put together in the same manner as the cheebrid
http://www.e-cigarette-forum.com/forum/modding-forum/400430-cheebrid-made-easy.html

But this time I used a Stainless steel smok Telescope, and two AGA's or Hydra's with the SS tank. The top cap screws into the Telescope and must be flipped as the Cheebrid atty to attach to the body. It screws in but not completely flush. However looks and works sick as hell!

Blowtorch treatment optional.

Bottom atty deck with all four holes lead free solder. I modified the wick hole of my atty by boring it out for the fat fatty wick.

Ultra fried, slick daddy!

Hangin with Cheebrid and our new friend Coppervein Hornet Reo.

Get you sub $100 dollar build on! Got this baby with a 4 wrap of 28g Kanthal a1 0.7ohm's with AW 18500. Slap's the ole' neck with much authority.

 

[mre777]

Nice workaround, I bet you could dig up some kind of collar that would make that a little more streamline.

 

[Tarnacc]

I have been following the cheebrid thread and was thinking that the screw on atomizer connection of the smok telescope would make it a perfect candidate but I was concerned about the threads matching up.

thank you for posting this.

 

[asdaq]

Nice combination Nurz, you haven't by chance been watching blade brothers with that torch treatment there have you?

Sent from my Nexus 4 using Tapatalk 2

 

[Nurzrachit]

Nice combination Nurz, you haven't by chance been watching blade brothers with that torch treatment there have you?

Sent from my Nexus 4 using Tapatalk 2

No, had a friend gloryvapers do it to his GUS Synthesis combo and I was wowed by it. Could have gone all blue, but I kind of like the chameleon look in the sunlight of the partial burn. Give it a shot, try on a driptip first to see if you like it. Word of warning though, it does make the metal swell just a little and so the tip will be quite snug after the torching. The one I put on the Gnarly would have to be tapped out on the bottom of the cap with a screwdriver if I was to get it out.

 

[asdaq]

I've only got a few things in SS that were rather pricy to take a torch to. I do see this effect naturally occurring on some brass though (much more subtly but blues and pinkish purples) that I haven't quite figured out what it is reacting with.

 

[crss]

Nurz, i saw the cheebrid go to a nice home last week.... missed it by... Oh well. I do have 2 AGA Hydra's. I guess this will be my next weekend project. I never found an AGA original, so could not piece together the cheebrid. This one is doable!!! Thanks for the foresight, and nice work.