The Innokin iTaste VV V3 owners group

[Nailz]

For anyone who wants extra usb charging cables, got these from amazon last week - Amazon.com: 10 pcs pack 3 Feet Flat Stylish Multi-Color Micro USB to USB 2.0 Data Sync Charger Flat Cable for Samsung - Colors: White, Black, Green, Aqua Blue, Rose Pink, Yellow, Hot Pink, Purple, Red: Cell Phones & Accessories

Good price and nice looking in the colors, they also do the car chargers and plug in's in colors too

 

[flowerpots]

Did anyone get the FT V3 kit with the iClear16s? I'm not fond of these and not sure if anyone else is not liking them either or if maybe I am doing something wrong. I have used 1 so far and wasn't impressed with it (prefer the vivi novas for top-coil), and it leaks.

 

[Nailz]

Yes I got my 1st kit from FT, I like the iclear 16's, but do find they do not wick great with thicker juices, I use 50/50 and get the odd dry hit, just got the aspire bottom dual coil clearomizer and really liking them with the itaste v3.

I did have them leak to start with, have to make sure the bottom is screwed on real tight, since then not had a problem with leaking.

 

[Capt.shay]

Did anyone get the FT V3 kit with the iClear16s? I'm not fond of these and not sure if anyone else is not liking them either or if maybe I am doing something wrong. I have used 1 so far and wasn't impressed with it (prefer the vivi novas for top-coil), and it leaks.

I like but don't totally love the I 16's. They give a huge warm vape that I really like. One has to be careful however not to over fill them or they will flood. In fact, I never even fill them full, just to the line bellow full. But the vape is bigger than my Igo L dually.

My dislikes on them are they practically drink juice and with their very small capacity, they always need topping. I rarely take one out of the house because of that. Also there is a lot of condensation (probably because of the amount of vapor) and you can get a little taste once in a while. I do keep one in the rotation with a strong juice for those times when I feel like a real head spinner of a vape.

 

[flowerpots]

I like but don't totally love the I 16's. They give a huge warm vape that I really like. One has to be careful however not to over fill them or they will flood. In fact, I never even fill them full, just to the line bellow full. But the vape is bigger than my Igo L dually.

My dislikes on them are they practically drink juice and with their very small capacity, they always need topping. I rarely take one out of the house because of that. Also there is a lot of condensation (probably because of the amount of vapor) and you can get a little taste once in a while. I do keep one in the rotation with a strong juice for those times when I feel like a real head spinner of a vape.

I'm probably over filling it in an attempt to keep the coil wet so that it doesn't burn - I will try keeping it a little less full. Thanks for the insight.

Do you know if these are genuine 16's or clones?

 

[Capt.shay]

I'm probably over filling it in an attempt to keep the coil wet so that it doesn't burn - I will try keeping it a little less full. Thanks for the insight.

Do you know if these are genuine 16's or clones?

I'm quite certain that these are genuine. If FT say some thing is genuine brand then it is. You just have to watch out for things that don't say a genuine brand. Some of the clones are great but some are junk.

And speaking of FasTech, I will x-post this from the FT thread for the folks here:

iTaste V3's are back in stock.

https://www.fasttech.com/products/1363600

Order NOW if you were on the fence. They will run out soon.

I waited 9 days since order for mine. It is now in packaging
and preparing for the HK gauntlet.

 

[Pinggolfer]

I'm probably over filling it in an attempt to keep the coil wet so that it doesn't burn - I will try keeping it a little less full. Thanks for the insight.

Do you know if these are genuine 16's or clones?

The iClear 16 which comes with the VV3 will have VV/VW stamped on the side of the clearo down at the base. Very easy to find. If not there it's a fake.

 

[Patkid]

I am an owner of the Innokin iTaste VV V3.....i need a seller with reliable and great customer service. I love my Itaste but the battery is now dying after i just received it about a week ago. Been charging it for a day now and it is still on red. Anyone has issue with it like i do?? any help is welcomed or tips....charging the unit has been a hassle because my unit charges slowly for some reason or it wont charge up at all(charging light lit up, but takes will blink every 1-5 min and stop)

I'd love to know where you got yours.
I am in hell with with a vendor who is running me to death over a DOA chameleon Itazte v3.
I have a black one from vaping me that is just fine.
and I have a white one someone in HK post office supposedly coming from FT.
I ordered the chameleon from a respected vendor with a presence on ECF and am going to end up screwed. The other two were express kits and this one was the whole kit w/ iclears and was $53. shipped.
It cost me $9 and change to ship it back.
I was promised a call on Saturday.
I finally called today.
and was put off till tomorrow.
I think I am sunk.
I have been too frustrated to talk about it here.

 

[Tes45]

Anyone ever have an issue like this?

So I had an iTaste vv 3.0 for about two months, first upgrade from an eGo Twist. Worked amazing, loved it, best two vaping months of my life.

Then I lost it, still have no idea where the hell, but somewhere. Went to the local B&M last Sunday and picked up a new one. Worked the same, amazing little device, UNTIL Saturday night.

I had an EVOD on it, only tank I had used all week, and all of a sudden it just wouldn't vape when I fired. Fired the Ohm meter and it read NON. So I pulled off the EVOD and checked the connector, it was fine, only 6 days old. Screwed it back on and it still wouldn't fire.

Then I loosened it maybe a turn and a half and it connected and would fire. However, it gurgled bad, the vapor production was inconsistent, and I kept ending up with juice in my mouth.

So I just used my Twist til I went to bed that night. Next day I went and picked up a new iClear 30 and SMOK Aro.

Tried the iClear on the iTaste and nothing. Same for the EVOD and Aro. Have since tried a iClear16, iClear30 Visions dual coil, EVOD, Arro, T3S, and many random CE4s on it.

Nothing fires. Ever tank reads NON. I've tried raising the iTaste connection pin as well as lowering all the tanks connection pins. All the tanks work perfectly fine on my Twists.

Even when I know for sure the pins are making contact, the Ohm reader still outputs NON and the tank won't fire.

The battery appears to be fine. Charges fine. Turns on and off fine. Appears to be firing fine according to the LED. Adjust Voltage and Wattage fine.


I'm completely stumped on what the problem is. Wanted to make sure I wasn't missing something before I take it back.

 

[DavidOck]

I have one or two toppers that need a 510 to ego adapter to work on my VV3, but most are fine.

Sounds like it might be the VV, so going back to your B&M sounds like it might be the best course. Take a couple of your toppers with you, and see what they'll do.

Good luck!

 

[Pilk75]

I had that happen to mine on the same day I got my backup itaste (I think the old one got mad at me and said screw it lol). Worked flawlessly for about 2 months then on that day and since, it won't fire anything! It will read the ohms but won't fire. Just glad I had a backup for it. I would suggest going back to the B&M and seeing if maybe they will exchange or refund. I can understand mine messing up after 2 months of pretty heavy use, but after 6 days that's ridiculous.

 

[Patkid]

I'd love to know where you got yours.
I am in hell with with a vendor who is running me to death over a DOA chameleon Itazte v3.
I have a black one from vaping me that is just fine.
and I have a white one someone in HK post office supposedly coming from FT.
I ordered the chameleon from a respected vendor with a presence on ECF and am going to end up screwed. The other two were express kits and this one was the whole kit w/ iclears and was $53. shipped.
It cost me $9 and change to ship it back.
I was promised a call on Saturday.
I finally called today.
and was put off till tomorrow.
I think I am sunk.
I have been too frustrated to talk about it here.

I want to update with regard to this post.
My vendor came through in Spades.
They gave me a store credit for everything including my cost to ship to them.
They worked w/ me on the phone to help me place the order for the new kit using the credit.
It was quite a process to this point.
But in the end I get a new kit.
I guess it was worth jumping through all the hoops.
I had them open my new kit and test the batt to ensure I didn't have to go through this again.
I am glad this exercise is almost over.
Amen.
Pat

 

[Patkid]

Anyone ever have an issue like this?

So I had an iTaste vv 3.0 for about two months, first upgrade from an eGo Twist. Worked amazing, loved it, best two vaping months of my life.

Then I lost it, still have no idea where the hell, but somewhere. Went to the local B&M last Sunday and picked up a new one. Worked the same, amazing little device, UNTIL Saturday night.

I had an EVOD on it, only tank I had used all week, and all of a sudden it just wouldn't vape when I fired. Fired the Ohm meter and it read NON. So I pulled off the EVOD and checked the connector, it was fine, only 6 days old. Screwed it back on and it still wouldn't fire.

Then I loosened it maybe a turn and a half and it connected and would fire. However, it gurgled bad, the vapor production was inconsistent, and I kept ending up with juice in my mouth.

So I just used my Twist til I went to bed that night. Next day I went and picked up a new iClear 30 and SMOK Aro.

Tried the iClear on the iTaste and nothing. Same for the EVOD and Aro. Have since tried a iClear16, iClear30 Visions dual coil, EVOD, Arro, T3S, and many random CE4s on it.

Nothing fires. Ever tank reads NON. I've tried raising the iTaste connection pin as well as lowering all the tanks connection pins. All the tanks work perfectly fine on my Twists.

Even when I know for sure the pins are making contact, the Ohm reader still outputs NON and the tank won't fire.

The battery appears to be fine. Charges fine. Turns on and off fine. Appears to be firing fine according to the LED. Adjust Voltage and Wattage fine.


I'm completely stumped on what the problem is. Wanted to make sure I wasn't missing something before I take it back.

I will be following to see how this all works out. Please update as you can.
The only issue I have w/ the iTazte I have been using from VapingMe is that the minus button sticks and often doesn't work at all.
I am wondering about the longevity of life this wonderful little vape bit will have.
I do love it, but now think there may be some 'issues'.
I hope things work out well for you.
Pat

 

[Nailz]

I want to update with regard to this post.
My vendor came through in Spades.
They gave me a store credit for everything including my cost to ship to them.
They worked w/ me on the phone to help me place the order for the new kit using the credit.
It was quite a process to this point.
But in the end I get a new kit.
I guess it was worth jumping through all the hoops.
I had them open my new kit and test the batt to ensure I didn't have to go through this again.
I am glad this exercise is almost over.
Amen.
Pat

awesome news Pat, glad it has got resolved at last

 

[Pinggolfer]

I want to update with regard to this post.
My vendor came through in Spades.
They gave me a store credit for everything including my cost to ship to them.
They worked w/ me on the phone to help me place the order for the new kit using the credit.
It was quite a process to this point.
But in the end I get a new kit.
I guess it was worth jumping through all the hoops.
I had them open my new kit and test the batt to ensure I didn't have to go through this again.
I am glad this exercise is almost over.
Amen.
Pat

Great news I'm very happy for you.

 

[Joie]

very happy you got it resolved.....mine in still great and hope it continues to ......I am so impressed with it I ordered its BIG brother the MVP2 and it's out for delivery today........the battery life is suppose to be unbelievable.

 

[Pinggolfer]

very happy you got it resolved.....mine in still great and hope it continues to ......I am so impressed with it I ordered its BIG brother the MVP2 and it's out for delivery today........the battery life is suppose to be unbelievable.

I've heard nothing but good news about the MVP. Imagine going 2 and even 3 days without a charge? It will be all you need as you can always use your vv-3 as a backup if needed. I always love reading "out for delivery".

 

[Joie]

got it....now I have little brother and big brother.....best tasting I have ever had....EGO's going in the drawer now for sure. or up for trade.

 

[dale1962]

I got the VW itaste from FT the full kit with 5 iclear16's about month and half ago and everything fine except the occaisional non connect with evods.Really can't beat it for less than 40 bucks and everything authentic.

 

[Pinggolfer]

got it....now I have little brother and big brother.....best tasting I have ever had....EGO's going in the drawer now for sure. or up for trade.

Tell us all about your new addition. Which color did you get? Where did you buy it? It's on my list to have.