The Overlooked Tootle Puffer Gear Thread

[MsLoud]

Be sure you use to correct coils. I believe - and I could be wrong as I do not do TC any longer - but the nickle and titanium coils are for temp control only. Most prebuilt coils have a blue oring to let you know it is for temp control. To use watts/volts settings, you need normal coils - has a white or some such oring on the 510 connection part.

 

[qBan]

Be sure you use to correct coils. I believe - and I could be wrong as I do not do TC any longer - but the nickle and titanium coils are for temp control only. Most prebuilt coils have a blue oring to let you know it is for temp control. To use watts/volts settings, you need normal coils - has a white or some such oring on the 510 connection part.

So if I was to use a nickel coil in wattage mode, what would happen? It wouldn't fire or what could be the negative effects of that?

Sent from Droid Turbo using Tapatalk

 

[pufZeppelin]

The evic vt will be my first tc device. I'm kinda eager to see what the differences between temp control and watt mode are.

I prefer the CLR Ti (titanium) coils

-the 'stock' CL coils are Vertical
-the CLR coils are Horizontal

don't throw your coils away when used up, save them (they're small)

- eGo ONE CL & CLR Heads by JoyeTech (Temperature Control) - Coil - Atomizer

 

[roxynoodle]

So if I was to use a nickel coil in wattage mode, what would happen? It wouldn't fire or what could be the negative effects of that?

Sent from Droid Turbo using Tapatalk

It will probably ruin it. It could oxidize and be dangerous. The mod may know its a tc coil ?

 

[pufZeppelin]

just don't do it...

I hear people say they did both (didn't know any better)
anyway, have not yet heard of tragedy occurring...

this is the 4 CL coils offered

 

[qBan]

Will the kanthal one work in TC, or is that one just specifically for watt mode or power mode???

Sorry fellas, is a lot if info to take in and I just want to make sure I'm doing it the correct way

Sent from Droid Turbo using Tapatalk

 

[roxynoodle]

Ok, so you need to put the mod in ni or ti mode I assume?

Yes, the issue is ni and ti can oxidize and be potentially dangerous when overheated. Tc mode prevents that from happening but regular power mode could let that happen.

 

[roxynoodle]

Will the kanthal one work in TC, or is that one just specifically for watt mode or power mode???

Sorry fellas, is a lot if info to take in and I just want to make sure I'm doing it the correct way

Sent from Droid Turbo using Tapatalk

Those must be used in power mode. Tc won't work correctly with kanthal because kanthal keeps a stable resistance when heated. Tc works by detecting changes in resistance, which ni and ti do when heated. And it cuts power to keep them at the temp you set.

 

[qBan]

Ok, thank you. I get it now I think. Titanium or nickel for temp control, and kanthal for watt

Sent from Droid Turbo using Tapatalk

 

[roxynoodle]

Ok, thank you. I get it now I think. Titanium or nickel for temp control, and kanthal for watt

Sent from Droid Turbo using Tapatalk

You got it.

 

[qBan]

Could I run the titanium coils at under 40 watts? I was just doing some research online and came across a page for sale on the ego titanium coils that it said they're recommended to use the ti coils for 40 watts and above. Is there any risk if is lower than 40?

Sent from Droid Turbo using Tapatalk

 

[pufZeppelin]

the "VT" won't go below 30 watts in TC mode (VTC corrected this)
thing is, it won't hurt going low, just NOTHING happens
unit goes IMMEDIATELY to Temp Protection with little vapor produced...

Ok, thank you. I get it now I think. Titanium or nickel for temp control, and kanthal for watt

just a ruff reference

standard Watt control wire :

- Kanthal A1 Resistance Wire (Odd Gauges)
- Nichrome Series 80 Resistance Wire

Temp Control Wires:

- Annealed Nickel Wire Ni200 (NON RESISTANCE)
- Titanium Wire (Surgical Grade 1)

 

[qBan]

Thank you much. I understand just a little more now

Sent from Droid Turbo using Tapatalk

 

[pufZeppelin]

yepper, it will come to ya, not that bigga deal

TC doesn't make it taste any better IMO

just protects ya from burning the wick up

 

[pufZeppelin]

And puf, let's vape O'er the Hills and Far Away

You helped me when I was a newb with my MVP.

yes, LETS till the Levee Breaks...

so what's the story on the MVP ... ?

 

[Kenna]

Wicks up to touch the fluff filler inside that holds the juice.

Fluff filler? ok, off to You Tube I go!

 

[roxynoodle]

yes, LETS till the Levee Breaks...
View attachment 508168

so what's the story on the MVP ... ?

Back when I first got it I didn't know what to set it for with my Aerotanks . I posted in the MVP owners thread.

 

[pufZeppelin]

RoxyMusic: Back when I first got it I didn't know what to set it for with my Aerotanks .
I posted in the MVP owners thread.

yes, yes...

but I meant, what is the status of your MVP at this time... ?

• still works like a champ
• sold it to finance your sauerkraut farm
• it died a pleasant (or not so pleasant) death
• gave it to a Monk, because you couldn't believe he was using an old Blu cig-a-like
• just don't use it 'cause it's really heavy

 

[Capt.shay]

Wicks up to touch the fluff filler inside that holds the juice.

Yes, at least one wick tail needs to touch the fluff that holds the juice.

I so should have done like any research on this thing before I impulse bought it. I saw the design and thought it worked more like the Achilles. Fluff filler? Top wicking? I am glad it was cheap.

 

[TrollDragon]

Fluff filler? ok, off to You Tube I go!

I so should have done like any research on this thing before I impulse bought it. I saw the design and thought it worked more like the Achilles. Fluff filler? Top wicking? I am glad it was cheap.

I think they all use this for filler...
http://www.amazon.com/Juwel-Filter-Poly-Pad-Jumbo/dp/B000G04LZE

Or this...
http://www.amazon.com/Sera-Filter-Wool-1-1-lbs/dp/B002XT4R2I