The Overlooked Tootle Puffer Gear Thread

[roxynoodle]

Before CNY I contacted Wismec with an idea to use the rx200 body for a dual battery regulated squonker. They are discussing it in the R&D department Wow, I would be so happy if they made it! I suggested:

*150W since its 2 batteries
* put squonk bottle in the front where the third battery goes and cut squonk hole in the battery door
* move 510 to above the bottle

The board would then be far away from the juice and isolated. You would have to move the juice bottle to the side to get your batteries in, but that's a minor inconvenience I think for a cheap two battery regulated squonker.

What do y'all think?

 

[JMarca]

Only downside is you'd need a very long positive wire which is where voltage drops and inaccuracies occur, maybe they can get around that with really thick gauge wire. As far as the idea I love that, I'd buy one. Still waiting on my Steamcrave to arrive, damn CNY.

 

[roxynoodle]

Only downside is you'd need a very long positive wire which is where voltage drops and inaccuracies occur, maybe they can get around that with really thick gauge wire. As far as the idea I love that, I'd buy one. Still waiting on my Steamcrave to arrive, damn CNY.

Hopefully they'll do it right, if they do it at all. And even if that makes the power delivery less accurate, I would still be happy with an inexpensive dual battery squonker that can power claptons well

 

[pokemom]

Before CNY I contacted Wismec with an idea to use the rx200 body for a dual battery regulated squonker. They are discussing it in the R&D department Wow, I would be so happy if they made it! I suggested:

*150W since its 2 batteries
* put squonk bottle in the front where the third battery goes and cut squonk hole in the battery door
* move 510 to above the bottle

The board would then be far away from the juice and isolated. You would have to move the juice bottle to the side to get your batteries in, but that's a minor inconvenience I think for a cheap two battery regulated squonker.

What do y'all think?

I'd buy one!


Sent from my iPhone using Tapatalk

 

[Kenna]

Before CNY I contacted Wismec with an idea to use the rx200 body for a dual battery regulated squonker. They are discussing it in the R&D department Wow, I would be so happy if they made it! I suggested:

*150W since its 2 batteries
* put squonk bottle in the front where the third battery goes and cut squonk hole in the battery door
* move 510 to above the bottle

The board would then be far away from the juice and isolated. You would have to move the juice bottle to the side to get your batteries in, but that's a minor inconvenience I think for a cheap two battery regulated squonker.

What do y'all think?

That sounds great, Roxy, I really like that idea.

 

[TheWestPole]

Kinda like this? DIY squonker vapers are always looking for such opportunities. That form factor is a gimmie for conversion. This one was done by @Subohmies. Check out the link below.

BOTTOM FEEDERS= a place for everything modified and/or custom made

 

[TrollDragon]

Kinda like this? DIY squonker vapers are always looking for such opportunities. That form factor is a gimmie for conversion.

BOTTOM FEEDERS= a place for everything modified and/or custom made

Too Fine!
You good sir, have just too much talent!

 

[ScandaLeX]

So what is your favorite? Now buy 50 of that & ignore the rest! [emoji1]

LOLOLOLOL!!!! I do not want 50 Subtank minis.

 

[JMarca]

Kinda like this? DIY squonker vapers are always looking for such opportunities. That form factor is a gimmie for conversion.


BOTTOM FEEDERS= a place for everything modified and/or custom made

VERY nicely done!

 

[Kenna]

LOLOLOLOL!!!! [emoji38] I do not want 50 Subtank minis.

Hey, I'm trying to spend your monies here. So you won't buy more furniture, ya know?

 

[Kenna]

Kinda like this? DIY squonker vapers are always looking for such opportunities. That form factor is a gimmie for conversion.

BOTTOM FEEDERS= a place for everything modified and/or custom made

NICE!

 

[TheWestPole]

Kinda like this? DIY squonker vapers are always looking for such opportunities. That form factor is a gimmie for conversion.

BOTTOM FEEDERS= a place for everything modified and/or custom made

Thanks, but that's @Subohmies' handy work, not mine.

 

[DingerCPA]

Before CNY I contacted Wismec with an idea to use the rx200 body for a dual battery regulated squonker. They are discussing it in the R&D department Wow, I would be so happy if they made it! I suggested:

*150W since its 2 batteries
* put squonk bottle in the front where the third battery goes and cut squonk hole in the battery door
* move 510 to above the bottle

The board would then be far away from the juice and isolated. You would have to move the juice bottle to the side to get your batteries in, but that's a minor inconvenience I think for a cheap two battery regulated squonker.

What do y'all think?

Kinda like this? DIY squonker vapers are always looking for such opportunities. That form factor is a gimmie for conversion.

BOTTOM FEEDERS= a place for everything modified and/or custom made

BRILLIANT!!!!!!!!

 

[roxynoodle]

Kinda like this? DIY squonker vapers are always looking for such opportunities. That form factor is a gimmie for conversion. This one was done by @Subohmies. Check out the link below.

BOTTOM FEEDERS= a place for everything modified and/or custom made

Great job! I've been so close to doing it.

 

[Boden]

Friend asked me to make her a wood vase. Did not specify size.

 

[Boden]

Before CNY I contacted Wismec with an idea to use the rx200 body for a dual battery regulated squonker. They are discussing it in the R&D department Wow, I would be so happy if they made it! I suggested:

*150W since its 2 batteries
* put squonk bottle in the front where the third battery goes and cut squonk hole in the battery door
* move 510 to above the bottle

The board would then be far away from the juice and isolated. You would have to move the juice bottle to the side to get your batteries in, but that's a minor inconvenience I think for a cheap two battery regulated squonker.

What do y'all think?

I made one last week with the guts from a hexohm. It was too large for me so I recycled it.

Became this

 

[Kenna]

Friend asked me to make her a wood vase. Did not specify size.
View attachment 531358

Hilarious!

 

[TheWestPole]

Friend asked me to make her a wood vase. Did not specify size.
View attachment 531358

How big is she?

 

[rhelton]

Before CNY I contacted Wismec with an idea to use the rx200 body for a dual battery regulated squonker. They are discussing it in the R&D department Wow, I would be so happy if they made it! I suggested:

*150W since its 2 batteries
* put squonk bottle in the front where the third battery goes and cut squonk hole in the battery door
* move 510 to above the bottle

The board would then be far away from the juice and isolated. You would have to move the juice bottle to the side to get your batteries in, but that's a minor inconvenience I think for a cheap two battery regulated squonker.

What do y'all think?

Thats a great idea! I think it would work pretty well too.

 

[ScandaLeX]

Hey, I'm trying to spend your monies here. So you won't buy more furniture, ya know?

More furniture will be bought. Remember my house is currently empty of fam so I'm taking advantage of it.

Note 5!!!