The Overlooked Tootle Puffer Gear Thread

[NoFumus]

@Foofightervape, there's also a coupon code for ecigexpress on ECF's coupon page

 

[DavidOck]

Ugghh..need help. All suggestions/feedback greatly appreciated.
I have several pieces of equipment. ipv's, Cloupor etc. Things that go to high wattage but I do not go high. I like to vape around 12 watts. With these aforementioned pieces of equipment I occasionally get blasted burning hits. The watts are set where I like them but there it is ...every once in awhile a burning hot hit.
I do not get this with my original istick (20watts) or my Vamo's (15watts)
Is there something I am not setting correctly? It is like the battery sets the device to BLAST without my consent

Don't know about the IPV, but the Cloupor 30 510 pin is screw adjustable. Might just be that it's not always making a solid contact.

If it sees a higher than expected resistance, it cranks up the volts to try to maintain the set watts. (And at 12, I wouldn't be too concerned about step-down.)

 

[Shawn Hoefer]

I've heard only good things about the VTC mini, but my favorite is the Presa 75W. It's got the same chip as the VTC mini, but my hands find its shape more comfortable, and my carpel tunnel is grateful for the firing button being the full face of the mod. It can usually be found for a bit less than the VTC mini, too.

Honestly, I would like the Presa 75 more, but the atty placement annoys me. I love my VTC mini...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[dhood]

Honestly, I would like the Presa 75 more, but the atty placement annoys me. I love my VTC mini...

Sent from my SAMSUNG-SM-N910A using Tapatalk

Check out the Presa 100. They moved the atty placement to the back.

 

[Shawn Hoefer]

Check out the Presa 100. They moved the atty placement to the back.

Been looking at that one pretty hard...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[NoFumus]

Honestly, I would like the Presa 75 more, but the atty placement annoys me. I love my VTC mini...

Sent from my SAMSUNG-SM-N910A using Tapatalk

As I said, I've heard nothing but good things about the VTC mini.

 

[DebiK]

As I said, I've heard nothing but good things about the VTC mini.

I love mine (VTC Mini)! It's my favorite mod at this time. I have a Pico on pre-order though, so that could change.

 

[Shawn Hoefer]

I love mine (VTC Mini)! It's my favorite mod at this time. I have a Pico on pre-order though, so that could change.

I'll only get the Pico if I can run it with a Pico.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[rhelton]

@Kenna

I'll only get the Pico if I can run it with a Pico.

Sent from my SAMSUNG-SM-N910A using Tapatalk

Im vapin a Pico right now

It is second only to my Tillemahos for a flavor atty.

 

[rhelton]

My IPV is a D2. So that is what is going on..lack of step down? What are ways around it?

It has step down in TC mode. If you put it in TC you will be able to get less than battery voltage even with kanthal. This is from my own experience and I passed the device over to a friend and he still uses it that way. It is something that was pretty common when they were released I imagine lots of people are still doing it that way.

You will not get TC with that wire but it will get the power down to where you need to be.

 

[Shawn Hoefer]

@Kenna

Im vapin a Pico right now

It is second only to my Tillemahos for a flavor atty.

My Pico is on my mini volt

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[rhelton]

My Pico is on my mini volt

Sent from my SAMSUNG-SM-N910A using Tapatalk

Nice little tanks. Little fiddly to build the first time or two but worth it.

 

[rhelton]

this sounds way over my head

Its easy, just put it in TC mod and select titanium wire. After that adjust the power as normal substituting Joules for Watts. If you want 10w put it at 10J and it will be fairly close.

 

[gt_1955]

I have only used CLR coils in the pico, and they're easy to rebuild

Written on 21st Century papyrus

 

[Shawn Hoefer]

Nice little tanks. Little fiddly to build the first time or two but worth it.

Actually, my first build was a CLR head. Love that feature...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[rhelton]

Yah I have not tried that yet. Does the capacity increase with the stock head?

 

[gt_1955]

Probably, but that's not the reason I use them And with rayon as the wick, and with very thin tails extending down the tank can be wicked completely empty. Eggcellent

Written on 21st Century papyrus

 

[rhelton]

Probably, but that's not the reason I use them And with rayon as the wick, and with very thin tails extending down the tank can be wicked completely empty. Eggcellent

Written on 21st Century papyrus

Yah that is good

 

[chanelvaps]

It has step down in TC mode. If you put it in TC you will be able to get less than battery voltage even with kanthal. This is from my own experience and I passed the device over to a friend and he still uses it that way. It is something that was pretty common when they were released I imagine lots of people are still doing it that way.

You will not get TC with that wire but it will get the power down to where you need to be.

no I am really confused because I thought you could only use TC with the specific wires, such a titanium and nickel. Not Kanthal. So if I figure out how to set it in TC and then set the watts where I want them that will solve the problem?

 

[chanelvaps]

no I am really confused because I thought you could only use TC with the specific wires, such a titanium and nickel. Not Kanthal. So if I figure out how to set it in TC and then set the watts where I want them that will solve the problem?

I will really have to watch some video's because I am clueless as to how to use my devices, especially the Cloupor. I need to figure out how to use it properly. I think I changed it by accident (TC and back) a few times and this is why I am seeing it as unreliable and 'all over the place'