The Poldiac Fan Club

[Nikkita6]

Thanks Nicole, that means a lot, coming from you! I still struggle to come up with ways to make my vape photography more interesting.
Things like framing, composition, and backgrounds. I'm getting better though. And a device like the Poldiac (and the MMV packaging)
makes it easier.

You're welcome, I enjoyed all of your pics very much, they made me smile. This is one of the reasons that vaping was such an easy hobby to take up, it gives me an outlet for creative expression. Keep taking pics, and trying out new things ... every vapeporn pic I take is an experiment of sorts, some come out better than others but its all fun to me.

 

[The.Drifter]

Oops. Meant to post moar photos. This thing, unsurprisingly, walks all over the clone I've got. Feels better/made better in every respect.
OverOne 0002 by zipflint, on Flickr
OverOne 0005 by zipflint, on Flickr
OverOne 0007 by zipflint, on Flickr
OverOne 0008 by zipflint, on Flickr
Poldiac Cloud Wizard with OverOne dripper by zipflint, on Flickr

Glad you finally got your MMV shipment in Your Setup looks great As per your usual, your pics are nice, bright and crisp! Your shots show great detail and clarity and I really do enjoy looking at your vapeporn, thanks for sharing buddy

 

[Highwayman1224]

Hooray!! Got home early today and couldn't wait to unwrap it! Holy wrap job batman, lol!!! Here she is in 18350 mode with my Lemo drop on top with some ITCVapes vanilla custard in it. Only problem is when in the hell am I going to remember that it's not a bottom fire mod & quit trying to push the bottom of it! LMAO! I didn't even have to mess with the center pin, my Lemo screwed on perfectly.

 

[zipflint]

Thanks man! I am INCREDIBLY relieved it finally got here! Been drippin' on the OverOne all friggin' day. It holds a ton of juice and the flavor is on point!

Glad you finally got your MMV shipment in Your Setup looks great As per your usual, your pics are nice, bright and crisp! Your shots show great detail and clarity and I really do enjoy looking at your vapeporn, thanks for sharing buddy

 

[zipflint]

Yeah man, they really DO mummify the goods! I appreciate the care taken. The Lemo looks sharp on there too!

Hooray!! Got home early today and couldn't wait to unwrap it! Holy wrap job batman, lol!!! Here she is in 18350 mode with my Lemo drop on top with some ITCVapes vanilla custard in it. Only problem is when in the hell am I going to remember that it's not a bottom fire mod & quit trying to push the bottom of it! LMAO! I didn't even have to mess with the center pin, my Lemo screwed on perfectly.

 

[Nikkita6]

Hooray 2x today! Your new set up is looking good Highwayman, enjoy it!

Hooray!! Got home early today and couldn't wait to unwrap it! Holy wrap job batman, lol!!! Here she is in 18350 mode with my Lemo drop on top with some ITCVapes vanilla custard in it. Only problem is when in the hell am I going to remember that it's not a bottom fire mod & quit trying to push the bottom of it! LMAO! I didn't even have to mess with the center pin, my Lemo screwed on perfectly.

 

[Highwayman1224]

Thanks Zip & Niki! This thing feels like it hits really well also. I use my smpl mods a lot & this thing is right on par with them performance wise. So glad I caught it on sale.

 

[The.Drifter]

Hooray!! Got home early today and couldn't wait to unwrap it! Holy wrap job batman, lol!!! Here she is in 18350 mode with my Lemo drop on top with some ITCVapes vanilla custard in it. Only problem is when in the hell am I going to remember that it's not a bottom fire mod & quit trying to push the bottom of it! LMAO! I didn't even have to mess with the center pin, my Lemo screwed on perfectly.

Very cool, glad yours made it in safe too Looks good with the Lemo! Don't feel bad about hitting the bottom for a button, I still do it even after a couple weeks of having mine, seems to be a hard habit to break if we're use to bottom button firing mods LOL

 

[Nikkita6]

Very cool, glad yours made it in safe too Looks good with the Lemo! Don't feel bad about hitting the bottom for a button, I still do it even after a couple weeks of having mine, seems to be a hard habit to break if we're use to bottom button firing mods LOL

Yeah .. I confess, I have done this once or ... four times before

 

[Thrasher]

Lol the worst is yet to come. Sitting in a dark room with a bottom fire mod rotating and rotating, feeling the side over and over with your thumb thinking where the f is that dam side button lol.

 

[Portertown]

My two favorite mechanical mods are my Poldiacs and my Nanos. It sure took a long time for me to not get mixed up on the switch location when moving from one mod to the other. I think what helps is that I use a "vape band" at the top of the battery tube on the Poldiacs and it seems to draw my hand to the correct location for the switch.

Congrats to everyone on getting their new toys.

 

[Portertown]

Got the OverOne set up and it's damn great. Loads of flavor, airflow is smooth and whooshy. The option to make person weather systems is there, but I close it down a bit to make it into a flavor atty. I've got it at .45 Ohms. I think I might rebuild it to about .3 though. It's such a quiet, reserved lil' atty. But it still puts out. Dang that sounds dirrrrty....

I have found that .3 ohms is my sweet spot on the OverOne.

I tried a different way of placing the coils in the OverOne last night and it was a big time failure. I placed the coils up higher than I had ever done before. I had the bottom of the coils level with the center of the air slot, thinking the airflow would go up around both the front and back of the coils.
What happened however is that the airflow just went under the coil and came up the center post. I got about 25% of the vapor I normally get from the OverOne. I pressed the coils down and 100% vapor production returned.
Lesson learned........

 

[Portertown]

Its the Master plan to keep us on the comeback Porter!

I think Jim and Miriam are working real hard all the time on how to get us to buy more of their products. And you know what? It is working quite well.

 

[Nikkita6]

I think Jim and Miriam are working real hard all the time on how to get us to buy more of their products. And you know what? It is working quite well.

Yes it is Do you know if the first Kainos has been released yet?

 

[oplholik]

How bout an RTA designed for single coils, non Genny style? That might not be a big seller tho, since I guess most people like the DC's, and lower Ω's than I do. I just can't get into the wire mesh. Always go back to the cotton, or rayon wicks.

 

[Thrasher]

Yea I def could dig a single coil dripper. Don't care for the duals, its the only thing that stops me from getting a OO. Usually run mine at .6 with ribbon
, and make a hybrid threaded version as well.

 

[Portertown]

Yes it is Do you know if the first Kainos has been released yet?

Yes they have been supplied to the customers who ordered them early on.
Here is a post that was on MMVapors facebook page that was posted on march 2nd. " Thanks MMV... Loving my new Kainos. #26"

They have just listed a 26650 battery version Kainos for sale on MMV website.

I have sent a design of mine to Jim for a dual 18650 wood box mod with the new Yihi J temp control board/chip. I have not heard back from him yet, but I know he is thinking of a dual battery mod. I am not sure which board/chip he is thinking about using. I really hope he goes with my idea for the temp control one.
If any of you want such a mod, it can not hurt to let Jim know. He does listen to his customer's wants.

 

[Portertown]

Well this is my post #1000 and I decided this thread is where I wanted it to be as the Poldiac was the first authentic mod I purchased and is my favorite mechanical mod.

I am not sure if all of you know of the lottery that MMVapors has every month or so on their forum on their website. You use your order numbers as a "ticket". Each order number gives you an entry into the lottery. They give away some nice prizes to the winner, often a new release that is just coming out.

 

[oplholik]

Interesting, I did not know this. I'll have to keep an eye out for it.

 

[oplholik]

A dual purpose rebuildable would be good. Set it up as a dripper, or as a tank. Wouldn't need to be real fancy looking, just nice and clean with an easy to build on deck.