The right Reo batteries pays off...

Status
Not open for further replies.

kilroyst

Senior Member
ECF Veteran
Verified Member
May 11, 2013
128
290
oregon
When I bought my new Grand and RM2 a couple of months ago I had a metric ton of Panasonic CGR18650CH batteries that I use in my 'other' mods, most of them fairly new, and they 'sorta' have a psuedo button top. Well a battery is a battery right? I couldn't see dropping more money on new batts as long as I had perfectly good ones. So I used them and they worked ok, I was none the wiser.

As the Reo has become my all-day-every-day-tote-everywhere vape I decided to pick up a couple of the AW IMR 18650's that Rob (and others) recommend for Reo usage this week and the difference (to me) is pretty much like night and day. Battery life seems about the same, but it's that connection when I hit the GO button, feels so much more solid and the occasional misfire is eliminated. Its like they were....made...for...each...other.:glare:

Anyways, long story short...get the batts the master says to, it does make a difference.
 

dodari

Ultra Member
ECF Veteran
Verified Member
Dec 4, 2011
1,203
1,898
New Mexico
When I first got my Grand I had a couple of trustfire 18650 2000mAh or thereabouts, They were meh. So I got the AW IMRs and as everyone has noted it is head and shoulders above the rest even for longevity IMO.

Sooooo, I just tried to get to RTD Vapors from Rob's site up above and cannot get connected, like they're offline or something? Wanted to get a couple of AW IMR 18490s but can't connect. Hope it's only temporary. Anyone know? I'm sort of computer challenged and can't see why I can't connect when I can get to almost everywhere else.?
 

pdib

ECF Guru
ECF Veteran
Nov 23, 2012
17,151
127,511
www.e-cigarette-forum.com
Its like they were....made...for...each...other.

They were as it turns out! Not that that stops me messing about with them, but i put that down to my experimentation phase. The fact is that those batteries and the recommended batteries for each Reo work with fewer hiccups than most anything else!

T

still in one piece then?
 

_duffman_

Senior Member
Verified Member
Jul 13, 2013
73
149
Jacksonville, NC
The only problem that I see about the IMR's are the price tag. I just picked up four Panies for the price of one IMR. I have all flat top 18650's right now, and yeah I occasionally have a misfire, but the performance is still there so I don't really see a reason to run a 20 dollar battery when a 5 dollar Panie works just as good. This is just my .02.
 

pdib

ECF Guru
ECF Veteran
Nov 23, 2012
17,151
127,511
www.e-cigarette-forum.com
AW 1600s are, like, $9.95. If your problem (misfires) doesn't get worse, good on ya' *. (9.95 is about $1 more than what I paid for smokes daily. I think I can scratch it out from somewhere for a 6 month investment.)


Treebeard. I meant 1600s VS 2000s. And I meant, specifically for REO.
 
Last edited:

ancient puffer

EX PV Collector
ECF Veteran
Verified Member
Mar 8, 2011
2,733
8,827
79
Virginia, USA
When I first got my REO, I started out with AW IMR's 1600mAH batteries. Then when the 2000mAH's came out, and since mine were over a year old, I bought 2000mAHs. Just for funzies, last week, I pulled out one of the 1600mAH batteries (I keep them all charged) and plopped it in my Grand.

I could spout all sorts of colorful descriptions of the difference, but bottom line, even though my 2000mAH batteries are still fine, I ordered a brand new set of the 1600mAH's. Been in a coma ever since they arrived yesterday and I charged them.

I'm not a picky person, nor overly perceptive of subtle differences, but there's just no comparison, the 1600's win out hands down. And in case anyone is wondering about how long they last, I vaped the first one for 14 hours straight, final reading when I switched it out: 3.81 volts.

ETA: Although the 1600 that I tried before ordering more was close to 2 yrs old, it still out vaped the newer 2000's I've been using. Get the AW IMR 1600 mAH batteries. As I noted in another thread (paraphrased), who wants to drive a '68 Plymouth Sport Fury with a VW engine in it?
 
Last edited:

NicoHolic

Ultra Member
ECF Veteran
Jul 13, 2013
2,034
4,435
USA
I use the 2000 with a 0.5Ω coil, meaning about 7-8A. The 2000 are rated at 10A, so I'm still within the NEC/NFPA 80% of rating design criteria and they work fine.

The 1600 are rated at 15C or 15 x 1.6AH = 24A. More conservative. The 1600 MAY have lower internal resistance as well. AFAIK, no one's tested them.

For those not sub-ohming, the 2000 have more mAH, but under a 7-8A load, capacity is about the same.

That's the difference.
 

pdib

ECF Guru
ECF Veteran
Nov 23, 2012
17,151
127,511
www.e-cigarette-forum.com
Yeah, I get about 12 hours from my 1600s. Certainly enough time to get home and switch it for a fresh one.

The 1600s have much lower internal resistance (that's why they are rated at 24amp max discharge, vs. 10amps for the 2000s). This means they can dump amperage onto your coil throughout a charge cycle without breaking a sweat. The 2000s start to sag and offer less punch with each vape. With mechanical, we are only using the 4.1 to 3.8 volt range of the storage capacity. So it doesn't matter that the 2000 can deliver longer in the 3.7 to 3.3 volt range. I once described it like this . .. .
you ask for a cup of water (8oz). I say sure, do you want it poured from this wide mouth 16oz bottle? or this skinny dribble-top 20oz one?
 
Status
Not open for further replies.

Users who are viewing this thread