The Rose v2 Rebuildable Atomizer

[dice57]

Thank you, I will check it out.

Thanks for letting me know about the samples. I can't accept the juice samples. ~$800 fine if I import it from outside Europe and the entire package confiscated. I'll tell them not to ship any juice samples if I order.

Yeah no doubt about that, glad I mentioned it too. I mix DIY juice so always think it funny, cause will never vape the samples, usually give it to friends. Tis the main reason I mentioned it, but yeah, that would suck to lose Rose2 over another mans juice!! or something like that

 

[petemoss]

Was planning to order the Rose v2 from Vapist.net tomorrow when I get my paycheck, but turns out they just got sold out..

There's a Rose for sale in the classifieds. $150. I picked up one last month for $130.

And plenty of used Roses in the UKvapers forum but make sure it's v2.

 

[dice57]

Well, it has happened Rose2 has been CLONED!!! just got notice from VaporTek that it will be available end of August.

 

[hippesthippo]

Thank goodness. I lost the 510 threaded piece on my Rose. Been waiting 2 months for Eden Mods to make available a replacement for me to purchase. Lots of empty promises. Yeah, I'm an idiot for losing it, but.. $200 atties should have replacement parts for sale. Bring on the clone!

 

[dice57]

there is that, parts and the stand, heck the clone is a great investment just for that. Least the Erlkonigin has spare parts available, spendy but can get them

 

[hippesthippo]

Ithaka has spare parts. Taifun has spare parts. Earl has spare parts. Kayfun has spare parts. It would appear Eden Mods did finally ship my part out, 2 months later, but the point remains. $200 atties should have spare parts available. You can't just go out and spend another $200 because you lost a $5 part. Things break, things get lost, things happen. It would behoove Eden Mods to run a small batch out just for parts, so they don't have to wait for a unit that doesn't pass QC in order to help a customer.

People will buy spare parts if they're available. It's not like it's wasted money.

I'll still likely order the clone. Just for base and spare parts, it would be worth it.. but I'd LOVE to have another Rose in my collection.

 

[wrath186]

there is that, parts and the stand, heck the clone is a great investment just for that. Least the Erlkonigin has spare parts available, spendy but can get them

Still waiting to see if it's going to be cloned.

 

[dice57]

Well, it has happened Rose2 has been CLONED!!! just got notice from VaporTek that it will be available end of August.

Still waiting to see if it's going to be cloned.

Umm, hello, that's what we were talking about, it has been cloned and pre-orders are being taken. Probably show up at ft soon.

 

[Cullin Kin]

That RBA looks awesome! My goodness is it expensive though, holy cow. I'm super tempted.

 

[Thejack1]

That RBA looks awesome! My goodness is it expensive though, holy cow. I'm super tempted.

It IS awesome! Purchased one new, loved it so much, grabbed another one used. Currently waiting on the Stumpy kit for it. Keep your eyes peeled....they pop up every now and then in the various forums for sale used. Good luck!

 

[dice57]

That RBA looks awesome! My goodness is it expensive though, holy cow. I'm super tempted.

Expensive? Well for what you get, build quality, totally rba package, spare parts and tools, thinks it's at the proper price point for an Authentic. Heck, paid $250 for delivery of the Erlkonigin, but had to pay extra for the SS tank section, drip tip and d.tip adaptor. No extra parts were included. The Kayfun 3.1 went for $175, if you could find one, that is.

It IS awesome! Purchased one new, loved it so much, grabbed another one used. Currently waiting on the Stumpy kit for it. Keep your eyes peeled....they pop up every now and then in the various forums for sale used. Good luck!

Yeah have two Rose2's me self. What the frak is the "Stumpy Kit"??? more ml's with fatter tank, like the Erli??

 

[Thejack1]

Expensive? Well for what you get, build quality, totally rba package, spare parts and tools, thinks it's at the proper price point for an Authentic. Heck, paid $250 for delivery of the Erlkonigin, but had to pay extra for the SS tank section, drip tip and d.tip adaptor. No extra parts were included. The Kayfun 3.1 went for $175, if you could find one, that is.



Yeah have two Rose2's me self. What the frak is the "Stumpy Kit"??? more ml's with fatter tank, like the Erli??

Stumpy kit is a different tank/driptip-juice control, to be used with your existing coiling base.It reduces the height and weight significantly, and the best part is.the juice capacity went from 3.7 to 3.5 ml. barely any loss. Just got mine!

 

[dice57]

OIC, not interested in shortening nor reducing juice capacity. Heck, 2 of my goto mods are both 26650 mechs.

Same Big Buddha on both, the one on the right is my version of a stumpy mod. Both have an iV-4 build, at 0.26 ohms, and hold 10 ml of juice. The el gignate clone, is actually shorter than the Stingray Copper Black in 18650 mode. Have the helmsman top cap on it, so that does add a couple mm to it's height, but gives this combo a pretty flush fit.

The Copper Mutant clone is one hefty mod, very solid, and can be used in self defense. Although a tall mod, with the Buddha on top it's still shorter than the full Russian on top the Stingray red copper. Both of these clones are outstanding, and some of me favorite gear. Will have to take some picks of size comparison to the 18650 mods and tanks.

Whipped up 2 new House Select recipes, have English Blackberry in the glass tank, and Ginger Bread Cheese Cake in full metal jacket.

Really liking Ehpro's, "not a Clone", Big Buddha. Native dual coil, Kayfun/Russian style pressure equalization wicking, but much, much, better, and Comes with both, Nano style, SS & glass tank sections. Only put the glass one on to precisely measure it's max capacity. Although pushing to much juice in, does super saturate the wick, excess just runs down the chimney

 

[XBarbarian]

so.. Im on a unique RTA quest.. after getting 'ma Erl. Love it btw. these Rose v2's.. the atomization chamber looks funky! but if Dice and the Jack like em, they must be decent.. how they work? coils a challenge to build and wick? gonna go back a nd read through the thread.

 

[Thejack1]

so.. Im on a unique RTA quest.. after getting 'ma Erl. Love it btw. these Rose v2's.. the atomization chamber looks funky! but if Dice and the Jack like em, they must be decent.. how they work? coils a challenge to build and wick? gonna go back a nd read through the thread.

Not gonna lie....for me, personally, I find it a bit harder to set up than the Erl. But I have huge paws, so I expected that. The airflow is tighter than the Erl. I HAVE had some small leaks on the Erl when I rebuild the coil, I have NEVER had a leak on the Rose. At the end of the day, If I had a gun to my head and could only have one tank for the rest of the year, Id choose the Rose, with the Erl a close second. But thats just me. For me, the Rose is just a flavor machine, and I'm a flavor ......
Todd reviewed the original,and there are a few others on youtube. Here is a pretty well rounded look at it :
https://www.youtube.com/watch?v=lGXACqC4yQg

 

[hippesthippo]

You have a Rose v1 or v2, Jack? PBusardo was saying he thinks the airflow on his Earl is tighter than a Kayfun.. which turned me off. For me, Rosev2 wide open is still a tad to tight. I prefer a 2.5-3mm draw on single airholes.

Rose v2 is my second favorite tank, right behind the Flash E v3, and right above my drilled out Taifun. Kayfun is a distant forth. Flash E v3 just has the smoothest draw of any vape I've experienced. It's difficult to describe. I can't stand how my Rose whistles. It's worse than a Kayfun in that respect. Unless you take the AFC ring off completely, at which point the whistle disappears but it just looks too silly.

 

[Thejack1]

You have a Rose v1 or v2, Jack? PBusardo was saying he thinks the airflow on his Earl is tighter than a Kayfun.. which turned me off. For me, Rosev2 wide open is still a tad to tight. I prefer a 2.5-3mm draw on single airholes.

Rose v2 is my second favorite tank, right behind the Flash E v3, and right above my drilled out Taifun. Kayfun is a distant forth. Flash E v3 just has the smoothest draw of any vape I've experienced. It's difficult to describe. I can't stand how my Rose whistles. It's worse than a Kayfun in that respect. Unless you take the AFC ring off completely, at which point the whistle disappears but it just looks too silly.

I have the Rose V2, and yep, she's a bit tight, but that's part of the equation for flavor. I agree with Busardo on the Erl...even with the air control removed , it's a tad tight as well. My squape reloaded is by far the most open of all of them. My Rose doesn't really whistle. Slight, if ever. Do you have the V2? I haven't tried the Flash E yet....that good, eh?

 

[dice57]

Erli, or rose, hmm, the rose is a more complete rebuilding package, plain and simple, On both I have removed the ac rings for maximum air flow. I do love the mounting post's on the Rose2 better, once one finds their preferred coil height, simply cut leads to desired length, push into mounting hole and tighten set screws. Really starting to dislike build platforms that only trap under screw heads.

Tell you one thing, once the Rose is in play, one gets spoiled by all the extras and tools included in the package. Personally, am going through Big Buddha love right now, so the Erli/Rose vape off is not clear in my head

To tell the truth, neither can vape as well as my flashi, but heck, flashi is a dripoper with a tank attached But seriously, most great tanks are going to remain great, all having slightly different subtitles and characteristics, and the build really does make the tank, in the final consensus. Heck, have a build in the Russian right now, that would put up against most any tank, keeping it in my main rotation, just vapes soo good been running the same House Select juice in it for 8 months, it's my dedicated Hypnotic Mary juice burner

Love all things vape, except for the crap Worst thing about the Rose is her small tank capacity, but aside form that she has all my must haves and would like to see, features that I look for in an rba.

 

[EuroChris]

I just ordered it directly from Edenmods. Looking forward to getting it.

After watching the reviews, I think this is going to fit my use perfectly. I like the fact that you can rebuild without emptying it, the toolless AFC and that it has an adjustable center pin so it sits flush. The 3.7ml juice capacity is not a big problem for me since I have a couple of other RTAs and mods I use too.

It just seems like such a good and well thoughtout RTA. I don't get why it's not more popular. Maybe it is the price?

 

[dice57]

The thing I like about juice control, is that you can open up the throttle, if turning up the watts. I use both regulated and high amp regulated mods. So I build to vape great on both. Vape an 0.40 build on a mech, one has a decent 40 watt vape, throw it on a regulated crank it up to 5.5 volts, heck your doing 75, well, just open a half turn or so, and Rose most graciously responds to your demands.

When it comes right down to it, love all my rba's, but for the total package deal, there's nothing that is better than a Rose. Sure, can out vape it with whatever, maybe, well the Magma will spank it's rosy behind, but that ain't a tank And any build under 0.5 ohms, just lose the ac ring, well not lose it, store it in the vape box. Makes for a good no-pest strip, when out on the town. lmao. but the total package will spoil ya, fer sur.