"The Russian" 91% (Kayfun Lite Clone With A Twist)

Status
Not open for further replies.

Krizzell

Super Member
ECF Veteran
Aug 20, 2013
436
126
Las Vegas
I'm sure if they did it on the side like the russion everyone would be saying CLONE and COPY.

The base of the KFL+ actually looks a few mm taller than the previous lite.

Sent from my HTC One using Tapatalk

Might look that way but I guarantee it's the same that way all the parts will be interchangeable.
 

mekc57

Super Member
ECF Veteran
Verified Member
Oct 27, 2013
530
2,748
Oregon
I'm sure this has been addressed here, but.....my Russian 91 will be here today. What's the best way to clean it before the first use? Thanks!
I wash all my new tanks with dawn and warm water and a good rinse after.

Be warned there is some assembly required. I didn't realize that I needed to remove the adjustment screw in the + post before I installed it and the connection block inside was loose till I took it apart and realized my mistake. Also added a second micro o ring to the adjustment screw to help it hold its adjustment better.
Works much better now!
 

SKYYcamel

Ultra Member
ECF Veteran
Verified Member
Apr 15, 2009
2,170
3,097
Mississippi
I wash all my new tanks with dawn and warm water and a good rinse after.

Be warned there is some assembly required. I didn't realize that I needed to remove the adjustment screw in the + post before I installed it and the connection block inside was loose till I took it apart and realized my mistake. Also added a second micro o ring to the adjustment screw to help it hold its adjustment better.
Works much better now!
I just got it out of the mailbox. It is a gorgeous atty! Some of things you said made no sense to me (I'm a total RBA noob). LOL :facepalm: Maybe it will make more sense when I get it all torn apart. Thanks!
 

Exhaler

Senior Member
ECF Veteran
Verified Member
May 3, 2013
241
208
Mountains of NC, USA
Anyone get their VT 91% shipped yet? I'm still waiting for mine. I figured since they had people wait over 3 months, shipping them out as fast as they can is the least they can do.

I've got no notice of mine shipping. They've had them for four days now.

1/2 hour after I typed the above, I received my shipping notice, finally!
 
Last edited:

mekc57

Super Member
ECF Veteran
Verified Member
Oct 27, 2013
530
2,748
Oregon
I just got it out of the mailbox. It is a gorgeous atty! Some of things you said made no sense to me (I'm a total RBA noob). LOL :facepalm: Maybe it will make more sense when I get it all torn apart. Thanks!

Yeah, me too, first RBA. That's probably why I put it together wrong. The little zip lock under the foam has the parts in it!

I polished mine up with some scotch bright. image.jpg
 
Last edited:

mekc57

Super Member
ECF Veteran
Verified Member
Oct 27, 2013
530
2,748
Oregon
I washed mine with dawn and warm water, watched a youtube vid to put it together and then set it up with a cotton wick. I really love this thing. I have had it for a couple of weeks. Love it!

I must of missed that video!:unsure:

I checked it out on YouTube and the one thing I didn't see is them adding an extra o ring. It seem to help in holding the screw where you set it.
 
Last edited:

AlanWoltemath

Senior Member
ECF Veteran
Apr 6, 2013
156
62
Conroe, Tx
VT finally shipped mine and tracking says it will be here on monday. Longest effin wait ever but for the price i got it for i guess i can't complain to much. I have watched review and build videos every day since i ordered the 91% and i should be and expert by now, :)
Can't wait till monday to see if that is the case.
 

donnah

Vaping Master
ECF Veteran
Verified Member
Aug 22, 2010
4,470
4,463
Albemarle, North Carolina
Just got mine also. I waited over 12 weeks for it, I guess I can wait another week. :facepalm

My tracking says mine got into Charlotte this afternoon... that means it will be here tomorrow! I'm glad I ordered it.. for the price I guess the wait has been worth it. I've had kayfun lites to play with so it's not like I suffered with nothing while I waited lol
 

Krizzell

Super Member
ECF Veteran
Aug 20, 2013
436
126
Las Vegas

peterforpats

Ultra Member
ECF Veteran
Verified Member
May 3, 2013
2,107
3,177
rounding third and heading home...
Anyone get their VT 91% shipped yet? I'm still waiting for mine. I figured since they had people wait over 3 months, shipping them out as fast as they can is the least they can do.

FYI- vaportek didn't have people wait over 3 months to deliver. the manufacturer did. for you to not understand that is the reason they are no longer doing pre-orders. they shipped them out as soon as they got them. i am sure they didn't enjoy the wait either especially since they had to listen to comments like yours. might i suggest you learn what a pre-order is and keep the snarly comments to yourself....
 

Cjax

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2012
1,750
1,211
RVa USA
I'm sure this has been addressed here, but.....my Russian 91 will be here today. What's the best way to clean it before the first use? Thanks!

I boiled it first, then washed with dish soap, rinsed with hot water, and set it up. It tasted awful, so I did it all again, still awful!
Then I let it soak a few hours in isopropyl alcohol (rubbing alcohol) and rinsed thoroughly in hot water, and finally no more machine oil taste! Mine may have been an extreme case, but that sucker was COATED with machine oil when I first got it. I actually contemplated getting rid of it before the alcohol bath cause I couldn't figure out why it still tasted nasty and I was tired of wasting juice. Not anymore though! Hope this helps :)
 
Status
Not open for further replies.

Users who are viewing this thread