The VapeMate Juice Feeder by SuperT!

[Jackinkc]

Just got my vapemate in along with some cisco attys. Did the tube mod, and I love this thing. The only issue I am having is the fit on all my cisco atty's is very very tight. Should I take out the 0-ring or is it supposed to be this tight?

Thanks,

Jack

 

[forcedfuel50]

Just got my vapemate in along with some cisco attys. Did the tube mod, and I love this thing. The only issue I am having is the fit on all my cisco atty's is very very tight. Should I take out the 0-ring or is it supposed to be this tight?

Thanks,

Jack

Some attomizers are tighter then others that is for sure. Make sure you remove it each night as the Orings can swell and you'll have a heck of time getting it out if you leave it in for days on end. Shoot me your address in PM and i can get you out some thinner orings. A #47 and #36 are incrementally smaller and can be found at home depot or lowes in the plumbing section, ten for 2 bucks. You'll find the one on there too will loosen up with time. (i also include a spare oring with your Vapemate)

David

 

[debb]

If you have a tendency to flood the atties with it, I recommend that you use it as David originally designed it - without the tubing, and follow Tina's fabulous instructions on her video (I've got it linked to on the site).

could you link it here...can't find it...thanks..

nevermind, found it...

 

[Jackinkc]

David,

That is awfully nice of you to offer that. I live a few blocks away from Lowe's, so I will just shoot on over there. Thanks again for the offer though. I'm really enjoying this thing. A hit has never tasted better, and I don't ever have to drip. BRILLIANT....lol. What ever happened to those commercials anyway? I miss them.....

 

[camprman]

I got my VM right before I went into the hospital. Had an issue with atrial fibrillation. Many nurses wondered what I had, asked a great many questions, one even wondered if it was a way for me to shoot something at them! LOL I love my VM I use it on a eGo. I have also had to make a couple of road trips, and it has worked outstanding for me. All the flavor of dripping without the fuss and mess of dripping. The funniest comment came from my girlfriend, I thought it would be a lot bigger! LOL Its size and shape doesn't bother me, nor is it in the way at all. Awesome product! Thank you, David!

I just wish I had bought more bottles when I ordered. Going to be off work for 2 months means no money to buy. Oh well, be happy with what I have.

As far as my signature, this is my third go around quitting. I quit analogs for two months the first time, started the divorce proceedings, and started smoking. I am happily back to vaping full time.

 

[forcedfuel50]

As far as my signature, this is my third go around quitting. I quit analogs for two months the first time, started the divorce proceedings, and started smoking. I am happily back to vaping full time.

Congrats on being back to vaping! They say the third time is the charm

 

[Brewlady]

Got up this morning to at least 3 new inches of snow. Drove to work in the Outback, took me twice as long as usual to get there. Got in late only to get an email that we were closing at noon, and closed tomorrow. So I drove back home, taking the long way with less hills. Right hand clutching the steering wheel (or shifting) and the left hand firmly grasping my eGo, with my VapeMate and stainless steel drip tip. Almost three hours driving, at work for 1 1/2.

I've said it before, and right now I want to say it again, this thing is worth every penny.

(and I'm really sick of snow)

 

[forcedfuel50]

Got up this morning to at least 3 new inches of snow. Drove to work in the Outback, took me twice as long as usual to get there. Got in late only to get an email that we were closing at noon, and closed tomorrow. So I drove back home, taking the long way with less hills. Right hand clutching the steering wheel (or shifting) and the left hand firmly grasping my eGo, with my VapeMate and stainless steel drip tip. Almost three hours driving, at work for 1 1/2.

I've said it before, and right now I want to say it again, this thing is worth every penny.

(and I'm really sick of snow)

You must laugh at the snow in your Outback!

 

[Brewlady]

You must laugh at the snow in your Outback!

My Outback ROCKS in the snow, especially since I just got four new tires in the fall. I have to avoid hills because there are actually people in New England that own rear wheel drives. They tend to get stuck on a few nasty hills that are on my normal route.

 

[forcedfuel50]

My Outback ROCKS in the snow, especially since I just got four new tires in the fall. I have to avoid hills because there are actually people in New England that own rear wheel drives. They tend to get stuck on a few nasty hills that are on my normal route.

I used to have a Toyota 4x4 and it always made me look forward to snow, just for the challenge of getting through it!

 

[Erwin]

I just wanted to throw my .02 in on the vapemate. I am using it on my variable voltage mod that I built set at 5.5v and using a 4.5 ohm atty. When I first got it I was not very impressed with it. I put it back in the nice little pouch it comes in and went back to my CE2 cartos. Then one day I decided to take it to work and give it another day in court. After that day it grew on me. Next day even more so, to the point that I gave my cartos to a friend since he was in need. Now after 5 days of using it I am never looking back. There is a learning curve to this but I didn't feel it was to great and that was all it took for me to fall in love. I did mod the bottle with some tubing and that made a big difference. Thanks again for such a great product. Driving a train for a living it is nice to have all I need in one device so I don't have to distract myself from my job.

Vapemate Juice Feeder = FTW!!

 

[forcedfuel50]

Welcome Irwin, glad you are liking the Vapemate! What kind of train do you drive?

 

[5vz]

Gotta' say the VapeMate is perfect out of the box! I even tried fooling around with adding the plastic tubing to the bottle, didn't like that very much. Just can't beat a flawless design.

Now if only I had a Toyota 4x4, life would be good, but wait, a TRAIN! That is life at it's best.

 

[Bootsand]

w00t! I should have my new VapeMate soon. I've been waiting for a while for the black ones to come back in stock to match my Darwin I'm getting next week, but I couldn't wait any longer and posted in classifieds in case someone had an extra one. Sorry for not waiting, David!

To my surprise, someone came to my rescue that had bought two, and never used the second one! It's black!

I did order 5 more bottles and a shorty delrin tip to go with it. I really can't wait to see this thing in person, from the pics alone I'm simply stunned by the precision of the machine work on all Super-T items.

One thing that would interest me a lot is a delrin version of the small hole whistle drip tip, if that's possible. I figure with the VM the smaller hole would actually be preferred (less risk of juice spattering up into the mouth when you chain vape) but I'm a little OCD about color schemes and just can't do stainless steel with a black and brass Darwin. A brass tip would be SUPER AMAZING and I know you used to make them. Did you discontinue them because they were difficult to keep shiny? I know brass is a pain like that, but I'd totally be willing to bust out some Brasso and clean that thing daily if it matched the rest of the PV.

 

[forcedfuel50]

Black and Silver VM should be in early next week. Yes, i discontinued the brass due to how maintenance intensive they were, especially since they were constantly in a wet environment. I will be making some delrin though of the whistle tips

 

[mwa102464]

Got my 801 adapter just now in the mail, Forced = Thank You, this mutha Rocks with the Mini 2ohm 801's pure pleasurable vape.!

 

[04 Raider Rider]

Finally tried mine today

 

[HzG8rGrl]

Just thought I would throw this tip out there for everyone.
When I am not using my VM I use cartridge covers/condoms from a 901 cart and a 510 cart to cover the openings on the VM. The 901 fits in the top and the 510 covers the bottom.

 

[vapn]

Great idea, but I'm really never using mine... lol... its permanently attached. Both of em..

 

[04 Raider Rider]

Good tip,Thanks for posting !!