The VapeMate Juice Feeder by SuperT!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
They are just like any other atty when it comes to juice. You will vape until your taste changes and drip more. I use 5 ohm atties on 6v and love it. You get more vapor without sacrificing flavor. Plus your batteries last a lot longer.
I'm still waiting on the 306 adapters. Hopefully the shop will be able to pound them out once this christimas rush is over 
I'm still waiting on the 306 adapters. Hopefully the shop will be able to pound them out once this christimas rush is over
Sweet! Hey, I'm not sure if this has been asked. Will the 306 adapters be fine-tunned for Joye 306 atties or for Cisco's and Boge ones? Thanks.
So I just got my Vapemate yesterday. Up till now I've been a 95% Carto user. I've been using the VM last night and this morning almost exclusively. I did just flood my atty for the first time a few minutes ago, but not too bad. First impression is it is a great design and it works exactly as advertised.
It's perfect for trying out all those sample flavors you get as bonus and are good but that for me are not yet carto worthy, if that makes sense, as I use the same flavor in a carto till it is spent. I also see it as a perfect accessory for traveling, a big bottle of my usual juice and a couple 5ml bottles for variety, a couple atties just in case and I'm set for the holiday travels. Plus, it seems to be the perfect use for my Cherry Vape Dream Tip, that I always thought the hole was to small, but it is a bit tough to get out.
Thanks David!
Also FYI: Most of the Vaporbomb bottles have the perfect nozzle and have worked great, they are for the most part the clear plastic (a couple of my 30ml bottles are the soft plastic, but not the correct threads/nozzle; the other 30ml I have has both the correct threads and nozzle)
It's perfect for trying out all those sample flavors you get as bonus and are good but that for me are not yet carto worthy, if that makes sense, as I use the same flavor in a carto till it is spent. I also see it as a perfect accessory for traveling, a big bottle of my usual juice and a couple 5ml bottles for variety, a couple atties just in case and I'm set for the holiday travels. Plus, it seems to be the perfect use for my Cherry Vape Dream Tip, that I always thought the hole was to small, but it is a bit tough to get out.
Thanks David!
Also FYI: Most of the Vaporbomb bottles have the perfect nozzle and have worked great, they are for the most part the clear plastic (a couple of my 30ml bottles are the soft plastic, but not the correct threads/nozzle; the other 30ml I have has both the correct threads and nozzle)
Got my VM today--and I am ecstatic!! within five minutes had tube cut--bottle filled and was vaping away!!--no leaks--virtually no learning curve!! It is exactly what I was looking for!!---
thank you soo much David and thank you to all the great people on this board. I finished up reading all 86 pages of this thread at work last night--and watched the great videos from HzG8rGrl-got my VM and extra bottles from TOtally Wicked both today--already had aquarium tubing--could not have gone smoother!!!
now can't wait for the whistle drip tips---
thanks everyone--now I get to fill more bottles of my favorite flavors!!--such fun!!
Betty
thank you soo much David and thank you to all the great people on this board. I finished up reading all 86 pages of this thread at work last night--and watched the great videos from HzG8rGrl-got my VM and extra bottles from TOtally Wicked both today--already had aquarium tubing--could not have gone smoother!!!
now can't wait for the whistle drip tips---
thanks everyone--now I get to fill more bottles of my favorite flavors!!--such fun!!
Betty
Thanks HwyJ, good info on the bottles too! I also have the 5ml bottles up on my site too in packs of 5.
Kritterz, You are rockstar to get it up an running so quickly!
I'm glad you are liking your new toys!
Kritterz, You are rockstar to get it up an running so quickly!
I'm glad you are liking your new toys!
As i recall, the Cisco style are a few thousandths thinner then the Joye. These aren't just slide on friction fit, so they should work good with both.
Ah, nice! Thanks for your answer. Can't wait to get one, or two...
VapeMate has entered the Netherlands, but the entering was not cheap. After paying a lot of tax to the Dutch post/mail company who were so ‘kind’ to do the customs declaration for me, I had a small talk with the man of the postoffice who handled the package as the last one in mailsystem. As already crossed my mind, the man commented on the height of the tax amount; they are “rats”. Yeah, tell me… paying an amount of tax for which I can almost buy another VapeMate, than there is probably someone in the Dutch post/mail system who was very glad to be on the job for me. The same man who told me ‘they are rats’ could only give me the package after paying the tax.
Said that, I am very glad to have now a black VapeMate. It’s beautiful and surprised me how tiny, small and light weighted the VapeMate is. The pictures I saw earlier gave the impression it should be twice as large. The first use now is on a 510 Boge cartomizer, for learning. That works and it’s no not necessary to do the condom-fill every hour. Just a few squeezes in the VapeMate bottle once and a while, holding the VapeMate a bit in an angle-position so it drips on the side of the cartomizer.
The bottles David did send with it are the same as Lisa’s and they are nice small soft bottles. I even have a soft 2-3 ml bottle that fits. I think it’s an eye dropper bottle, with the same diameter, only the height is less. It was a free gift from a e-cig supplier in the Netherlands, so I don’t know where it’s coming from in the first place.
I wear my 6V mod often lanyardwise around my neck. The VapeMate makes that easier. There is no more need for a special homemade solution for connecting the lanyard to the mod, or special lanyard, because you can simply connect a cord around the vapemate and hang the mod/VapeMate safely around yr neck with it. Perfect.
The black VapeMate further completed with Davids black shorty T-tip, on my black mod, the look of the complete set-up is very well. I am now looking forward to a silver VapeMate for another mod set-up.
Said that, I am very glad to have now a black VapeMate. It’s beautiful and surprised me how tiny, small and light weighted the VapeMate is. The pictures I saw earlier gave the impression it should be twice as large. The first use now is on a 510 Boge cartomizer, for learning. That works and it’s no not necessary to do the condom-fill every hour. Just a few squeezes in the VapeMate bottle once and a while, holding the VapeMate a bit in an angle-position so it drips on the side of the cartomizer.
The bottles David did send with it are the same as Lisa’s and they are nice small soft bottles. I even have a soft 2-3 ml bottle that fits. I think it’s an eye dropper bottle, with the same diameter, only the height is less. It was a free gift from a e-cig supplier in the Netherlands, so I don’t know where it’s coming from in the first place.
I wear my 6V mod often lanyardwise around my neck. The VapeMate makes that easier. There is no more need for a special homemade solution for connecting the lanyard to the mod, or special lanyard, because you can simply connect a cord around the vapemate and hang the mod/VapeMate safely around yr neck with it. Perfect.
The black VapeMate further completed with Davids black shorty T-tip, on my black mod, the look of the complete set-up is very well. I am now looking forward to a silver VapeMate for another mod set-up.
David, where on your site are the 5-packs of little bottles for the VapeMate? I gave my 2nd VapeMate to my daughter and she loves it! And it's gonna save her life as she's on the road a lot every day. And...thanks for sending those 2 bottles after you got them in because you didn't have them with my first order! That was much appreciated and I gave those to my daughter.
If you look at the Vapemate page, they are just above the bottom pics. Sort of hiding, but they are there.
My Vapemate arrived 3 days ago and I had it up and running in less than five minutes including the tube. It's only taken me this long to extend my sincere thanks and compliments to David because I've been way too busy enjoying it to think. Honestly this was my missing link to relaxing and enjoying vaping with no hassles. One strange thing I have noticed is that my juice consumption is way down, I'm probably using about 33% of what I had been using prior to the Vapemate. I love that I can use this on any of my PVs but now I wonder what I am missing by not owning a SuperT PV. I may have to change that after the holiday rush is over. LOL Thank you for a great product!!!!!!!
Sorry if this has been asked repeatedly but what was the eta on the 306 adapter. I am very curious to see what kind of magic you worked with the adapter and the 306 drip tip. I am sure it was not an easy task but I sure am glad that you stuck with it. I guess I should wait till it comes out to rave about it but I know that if it wasn't right, you would not put it out. Thanks
. Thanks a lot for this, it took me all of five minutes to do and that includes sanding of the black paint from the black 510 atty tube. Works great! Using it on my vapemate right now.I've been using mine on the 306. All you need is a dead 510 or carto. Pull the casing off and then use a small piece of the mouthpiece that ships with the 306 to use as a sleeve to hold the 510 tube on the atty. Here is a pic...
Also, I got my VM today and used it in the car already, it took more than an hour to get the hang of it but I got it working great now. It seems a lot more safe than dripping and driving,
wish I would have had it for the past few days delivering on the crazy icy roads here in Michigan. Thank you David, it may sound silly but you may save some lives with this lil invention.
Last edited:
Awesome! I'm glad the info helped you out. Now you can enjoy the 306 and drip one handed in the car without looking. After you use the VM for a while you don't need to look at the sight glass anymore. I started out using the tube in my bottle but have since taken it out and feel more in control of the amount of juice I push in each time.
jcleaver, thanks for pointing the way. I got out my microscope and sure enough, they were there!
Good news! Interesting to hear too that your juice consumption is down. For some it has gone up. I wonder if maybe part of the reason is it can change vaping habits.
I must have missed it, or overlooked it somewhere... but for the bottles that come with the VapeMate, what size tube do you use to mod it, and where is a good place to pick some up?
Thanks.
Thanks.
- Status
Similar threads
