Cool I did that think he posted he had some v1s still so might get 1 if avail and ride this list out too...
The vaper by petar k automatic Genisis
- Thread starter brian272465
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo provari vapor beast vapor pro
- Status
Cool I did that think he posted he had some v1s still so might get 1 if avail and ride this list out too...
I'm really interested in this unit, I think it might be perfect for me! I'm guessing I'm probably too late? I've been waiting for vaporwall to let me in...
as far as i know its only going to 90 so you will be a reserve
Waiting for 7 days now for my Vaporwall confirmation
I think Del Boy has been away from his computer.
So I am down to one mouth piece now 
I found this @ McMaster-Carr and bought it today:
5054K613 Metric High-Temperature Silicone Rubber Tubing, Soft, 7 mm ID, 10 mm OD, 1.5 mm Wall, Blue
Had to order a 10FT section, so may have plenty, you think
?
Hopefully it is the correct size. Petar said 7mm ID x 10mm OD, or if I could not find it, 8mm ID. I know the 7mm has to be worked and stretched a little initially.
I found this @ McMaster-Carr and bought it today:5054K613 Metric High-Temperature Silicone Rubber Tubing, Soft, 7 mm ID, 10 mm OD, 1.5 mm Wall, Blue
Had to order a 10FT section, so may have plenty, you think
? Hopefully it is the correct size. Petar said 7mm ID x 10mm OD, or if I could not find it, 8mm ID. I know the 7mm has to be worked and stretched a little initially.
So I am down to one mouth piece now
5054K613Metric High-Temperature Silicone Rubber Tubing, Soft, 7 mm ID, 10 mm OD, 1.5 mm Wall, Blue
Had to order a 10FT section, so may have plenty, you think
Hopefully it is the correct size. Petar said 7mm ID x 10mm OD, or if I could not find it, 8mm ID. I know the 7mm has to be worked and stretched a little initially.
Let me know if they work out for you. I have been using carto condoms double layered for my mouth piece.
Brian, got my order of tube from McMaster-Carr. IT is to small. I am boiling it now to see if I can get it to expand. DO NOT ORDER 7mm ID x 10mm OD.
So gonna order some 5/16 x 7/16 and see how that does... since that equates to 8mm id. I can't get it in metric that size, but they have 9mm id, measuring, that will be large. So trying this again.
Man I hope Petar uses the same size silicone mouth piece as what he currently has for the V2... because I will have 10 ft of it.
So gonna order some 5/16 x 7/16 and see how that does... since that equates to 8mm id. I can't get it in metric that size, but they have 9mm id, measuring, that will be large. So trying this again.
Man I hope Petar uses the same size silicone mouth piece as what he currently has for the V2... because I will have 10 ft of it.
Last edited:
How did it go?
Need to seal mine for weeks but just today I've got the silicon ready but forgotten whatever instructions I saw/read and where they were: how did you go about?
To seal top:
-Take top off, take battery out. Use jewelers flat tip, screw little screw on side of tank IN some. That little screw holds tank in position.
-Now take BLUNT object (I use handle of small screwdriver) into tube against bottom of tank. Push it. Tank comes out.
-Clean everything with warm soapy water.
-Put silicon around around TOP of tank and were screw is, silicon only ABOVE the screw.
-Slide tank in. Ensure screw is lined up with hole before pushing in tank to flush with top of SS tube. Screw little screw out till flush.
-Clean silicon off top.
-Let sit to dry.
Done
Hope that helps. I should have made a video!
-Take top off, take battery out. Use jewelers flat tip, screw little screw on side of tank IN some. That little screw holds tank in position.
-Now take BLUNT object (I use handle of small screwdriver) into tube against bottom of tank. Push it. Tank comes out.
-Clean everything with warm soapy water.
-Put silicon around around TOP of tank and were screw is, silicon only ABOVE the screw.
-Slide tank in. Ensure screw is lined up with hole before pushing in tank to flush with top of SS tube. Screw little screw out till flush.
-Clean silicon off top.
-Let sit to dry.
Done
Hope that helps. I should have made a video!
So I got silicone tube that works!!! The perfect size is 5/16 ID x 7/16 OD. To cut, put a pen in the tube, measure, then use a knife/razor to roll tube on pen to get a fairly even cut. McMaster-Carr
I bought opaque white, very soft. Not the prettiest thing, but it works and I still have >9 feet left
I bought opaque white, very soft. Not the prettiest thing, but it works and I still have >9 feet left
So I got silicone tube that works!!! The perfect size is 5/16 ID x 7/16 OD. To cut, put a pen in the tube, measure, then use a knife/razor to roll tube on pen to get a fairly even cut. McMaster-Carr
I bought opaque white, very soft. Not the prettiest thing, but it works and I still have >9 feet left
Looks good jolly . Do they have minimum $ amount you have to order ?
They have a minimum foot order. This one was 10 foot of white opaque very soft. Which it is - very soft and white! They have "soft" in opaque black in the same size also and I was going to order both, but decided not to, as this has been my 3rd order to find a size that worked right.
The other colors are on the same page I linked, 10ft min order also, which comes to like $12 + $5.74 shipping to your house in 2 business days. If you just want a foot of white, PM me your addy.
The other colors are on the same page I linked, 10ft min order also, which comes to like $12 + $5.74 shipping to your house in 2 business days. If you just want a foot of white, PM me your addy.
Ugh... I only JUST put myself on the list!!! Wish I had done it a month ago! I'm #130 & V2 was officially announced but only 100 being made in the initial run! I dig the new adjustable air hole feature. Its going to be sick... whenever I get it!
nj. don't worry. last time Petar only took Western Union. A lot of people will drop/fail to pay because of this. Also, even once people get it, if they can't set it up, or don't like the switch, they will sell it. Additionally, you may see some V1's go up for sale after people get their V2.
There is nothing wrong with the V1 (IMO), it has been my work horse go to kit every day. The V2 looks like it will be heavier also, the batt tube will be more like the piccolo in size/thickness. I am not criticizing or complaining here, he took on board recommendations from users for improvement along with his own and is executing. The switch and mouth piece are the improvements that I think are most relevant. But he explicitly states 316ss matte finish, and screw in battery plug also, which is user suggestions.
I look fwd to his new Vaper, but I am keeping my V1 because it is a little beast.
There is nothing wrong with the V1 (IMO), it has been my work horse go to kit every day. The V2 looks like it will be heavier also, the batt tube will be more like the piccolo in size/thickness. I am not criticizing or complaining here, he took on board recommendations from users for improvement along with his own and is executing. The switch and mouth piece are the improvements that I think are most relevant. But he explicitly states 316ss matte finish, and screw in battery plug also, which is user suggestions.
I look fwd to his new Vaper, but I am keeping my V1 because it is a little beast.
I'm a little confused - didn't his wick wrapping trick with the drill bit come out before this mod? Had he made his own atomizer at that time?
I'm not getting rid of my v1 either .Iam gona get another v1 tank with my v2 order can't wait . I'm lucky this time i just moved to a new city and I can see a western union sign out my back window lol just waiting for petars pm.
- Status
Similar threads
- Locked
