I noticed on mine, there's a black mark all the way around on the thread above where the o-ring goes.
The Vmod XL 18650 Bottom Feeding Mod from Vapage.com
- Thread starter AlmightyGod
- Start date
- th_trl_thread_readers 0
- Status
YES, YES, YES !!!
I GOT IT !
REVIEW in the evening
I am soooooooooooooo happy for you smilee!!!!!!!!!!!!!
Thank you .......... I use 50pg/50vg so I shall purchase one of each of these and see how they do dripping on a ProVari.
YES, YES, YES !!!
I GOT IT !
REVIEW in the evening
Ohhhhh .... Poland has issued a dense fog alert......airports are closed....highways will be closed until further notice..... all nautical activity will come to a standstill......schools are closed.....and our friend smilee is............. well
smiling
Is a HH.357 Cisco Spec Hybrid Atomizers really the atty to end all attys
.357? Never heard of ...
@Smilee, no i co, kur ..cze blady?
Last edited:
This longed-for moment has come and hold in the hands of the best e-cigarette, the world has ever seen!
I'm glad it only for several hours, but at that time had never released him from the hands and four times fainted from nicotine.
At the outset I thank everyone for their support, which saved my life during this endless waiting for my XL.
Now, first impressions:
1) Appearance:
As the pictures - looks great, feels good in my hands and admit though that I was thinking of ordering smaller brother, the sooner I order a second XL - its size is just perfect.
2) cooperation with atomisers:
got into the turn, all I had and all the attys and carto work fine (on 6v 3ohm Slamming)
3) Power supply:
I was afraid that fit my battery (69mm), but there is no problem, come tighter than normal, but it's ok
4) Air flow:
is fairly sizable, but I do not mind
5) kneading the bottle
It took me moments of shift from Boge, where we had a really hard push, but controlled and is extra
6) construction - sturdy and simple - I like this - it is no mess
the only weak point is the o-rings, which probably wear out over time, but treating them as part of the performance is acceptable
7) Accessories:
drip tips - frankly, no revelations, went to the drawer, use mine old
BF atty 2ohms - not bad, but often you need to pour, maybe gets started, but I prefer the 1.7 ohm noname bridgeless
silo - not tested yet, but measured the measure and is 4ohms, so rather only to 6v
8) Switch - is ok - simple and working, blocking some unfinished visually, but effective
9) The minor flaws / improvements for the future:
retracts into the body - i have to move sideways a little to enter into
bottle holder - could be a little larger and also based on some plastic profiled in the middle - not to fly to the side, but it's nothing
hook on the lead - that I miss most - I got used to wearing the e-cigarette on the neck - I had something odd tricks on their own
overall rating 12/10 - I do not regret the purchase and all the nerves, and I strongly recommend for all!!!
edit: aaaah, one more (the largest defect) liquid disappears in the eyes
I'm glad it only for several hours, but at that time had never released him from the hands and four times fainted from nicotine.
At the outset I thank everyone for their support, which saved my life during this endless waiting for my XL.
Now, first impressions:
1) Appearance:
As the pictures - looks great, feels good in my hands and admit though that I was thinking of ordering smaller brother, the sooner I order a second XL - its size is just perfect.
2) cooperation with atomisers:
got into the turn, all I had and all the attys and carto work fine (on 6v 3ohm Slamming)
3) Power supply:
I was afraid that fit my battery (69mm), but there is no problem, come tighter than normal, but it's ok
4) Air flow:
is fairly sizable, but I do not mind
5) kneading the bottle
It took me moments of shift from Boge, where we had a really hard push, but controlled and is extra
6) construction - sturdy and simple - I like this - it is no mess
the only weak point is the o-rings, which probably wear out over time, but treating them as part of the performance is acceptable
7) Accessories:
drip tips - frankly, no revelations, went to the drawer, use mine old
BF atty 2ohms - not bad, but often you need to pour, maybe gets started, but I prefer the 1.7 ohm noname bridgeless
silo - not tested yet, but measured the measure and is 4ohms, so rather only to 6v
8) Switch - is ok - simple and working, blocking some unfinished visually, but effective
9) The minor flaws / improvements for the future:
retracts into the body - i have to move sideways a little to enter into
bottle holder - could be a little larger and also based on some plastic profiled in the middle - not to fly to the side, but it's nothing
hook on the lead - that I miss most - I got used to wearing the e-cigarette on the neck - I had something odd tricks on their own
overall rating 12/10
- I do not regret the purchase and all the nerves, and I strongly recommend for all!!!edit: aaaah, one more (the largest defect) liquid disappears in the eyes
Last edited:
Now that may close schools and airports all around, I have 6 batteries charged, 10 attys, liquid: 400ml, so I am ready even to warThank you .......... I use 50pg/50vg so I shall purchase one of each of these and see how they do dripping on a ProVari.
Ohhhhh .... Poland has issued a dense fog alert......airports are closed....highways will be closed until further notice..... all nautical activity will come to a standstill......schools are closed.....and our friend smilee is............. well
Congrats smilee. 
. Pictures Blondie -- cool!
And -- for future reference --- in the Tags for this Thread section at the very bottom of the page are listed 2 post numbers for pictures of the o-rings---each type. That general area of the thread from late January will have discussions about them, too.
(I'm doing fine not messing with it -- just let chamber o ring do its thing and it's feeding and working fine in it's broken, squished and out of place state!)
Last edited:
Happy Day's are here again, XL is BACK
The'll be even happier when lil vmod get's here too
Thanks Brian
The'll be even happier when lil vmod get's here tooThanks Brian
Congrats, sounds like it was worth your wait as it was mine. Make sure you order more o-rings next time. Already on my 3rd one as I lost the 1st and the 2nd already got eaten up and tore. Guess I'm hard on it!
i know this, but: "Sorry, the following item is currently out of stock: VMOD XL / VMOD 2.0 Seal Kit"
tell me what the o-rings, which are the hybrid atties (white) - I removed them with folded badly pumped - you do the same?
they're already out of o-rings? good thing I ordered 5 of them tuesday. it should be in my mail today.
i chat with CC - they have a seal and a bottle per week / two
i pay for shipment obout 20-25$ ;(
I was approached by anonymous to remind every one when using the Hybrid atty the washer can be removed.
Anonymous is speaking of this washer here removed from the thread post.
so toss it in the bin if you have a VMOD-XL or a VMOD2.0
anonymous said:Kami,
I saw y'all were talking about the aftermarket Hybrids with the white washer at the base of the threads.
................so maybe you can pass the info onto the gang...
The washer is there for the original VMOD, and for use with other mods like the REO or tube mods. It's not needed really (the old vmod does need it), it's there for spec differences between mods.
For the Vmod-XL and VMod2.0 you do not need it, but it still works. For me I think it performs better with it off.
just my
Rgds.
Anonymous is speaking of this washer here removed from the thread post.
so toss it in the bin if you have a VMOD-XL or a VMOD2.0
Last edited:
- Status
Similar threads
- Locked
- Locked
