The Womper Woom OR You Might Be A Modwomper

Status
Not open for further replies.

Boden

Vaping Master
ECF Veteran
Sep 7, 2012
5,516
28,164
Lexington KY
If you want to drip, and still have a nice MTL draw without modifications or fighting with adjustments....pick up a couple of old school 510 or 306 non-rebuildable attys out of the clearance bins almost anywhere.
Stopped using those about 4 years ago :) still have some drip shields around here somewhere
 

KattMamma

Ultra Member
ECF Veteran
Feb 10, 2015
1,733
6,442
DFW Area, Texas
I keep trying RDAs and my STM. I just don't get it. I don't think they work with a slow draw. If I gasp on them they work but I'm pretty sure that you shouldn't have to draw that much air to get them to work.

Ideas?
It took me a good while to figure out that some devices just don't work as well with a slower, lighter, or shorter draw. It also took a while for me to figure out that the way I vape is apparently different than most around here.

I used to only draw about 2 seconds but have worked up to 3 (most of the time), and I do kind of slower easier draws than most. And I have had fits with scorched hits and dry hits. I have adjusted a lot of things and am doing better now... finally.

I'm finally getting the hang of rewicking the occ coils for the stm, using less cotton than the stock coils. helps a lot. I always poke the stock coils with a needle. I may need to repoke it every 2 days or so. And I don't run more than 60vg unless I know for sure the wick will handle it (rewicked very well, or just got lucky with a stock coil, or whatever).
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
If you want to drip, and still have a nice MTL draw without modifications or fighting with adjustments....pick up a couple of old school 510 or 306 non-rebuildable attys out of the clearance bins almost anywhere.

I just opened my eyes :blink: and realized you passed 5 yrs smoke-free almost a week ago -- CONGRATS!!!!!!! HUGE milestone!!!!!!! :thumbs:

Andria
 

Boden

Vaping Master
ECF Veteran
Sep 7, 2012
5,516
28,164
Lexington KY
Or an Achilles... super saturated flavor, very tight draw. The TH can be rough, but I dropped from 10mg to 9mg, and started building my coils a bit lower, to make it not so rough on my throat.

Andria

That is definitely on my shopping list. I'll let you know how it goes once it gets here

Thanks :)
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
That is definitely on my shopping list. I'll let you know how it goes once it gets here

Thanks :)

It's even better with the Evic-VT -- yesterday, just starting to get used to the new mod, I realized that the flavor had changed very subtly, it just seemed *thinner* -- not so saturated. So I opened it up, and sure enough, although both wick tails were still pretty wet, the bottom of the well was dry -- perfect time to refill! :thumb: Since that's exactly the reason I got curious about TC aand got the Evic, it seems to be working perfectly. :) :thumbs:

It does seem to take the titanium a bit longer to break in than kanthal, but I hear they also last longer before gunking, so that's a decent trade-off.

Andria
 

Burnie

The Bug Man
ECF Veteran
Verified Member
Jul 1, 2009
5,564
18,197
Sunny Florida
Or an Achilles... super saturated flavor, very tight draw. The TH can be rough, but I dropped from 10mg to 9mg, and started building my coils a bit lower, to make it not so rough on my throat.

Andria
Where did you get your Achilles at, or do you know of a good price somewhere? Thanks
 
  • Like
Reactions: TrollDragon

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
Where did you get your Achilles at, or do you know of a good price somewhere? Thanks

Frog in Fog -- I paid $25, but woohoo! The price is now $19.95. Might be time to get another. :D (ETA: I used the "domestic expedited shipping", about $6-something, and got it in a couple of weeks).

Andria
 

DingerCPA

Vaping Mistress
ECF Veteran
Verified Member
Apr 9, 2014
9,020
61,413
Corn 'n' Cows
I just wanted to say a huge THANK YOU for posting this! As a few folks know - I have been wanting to go back to my vaping roots and have been looking at ego style batteries to go with some of my tanks. This is the first time I can say WHOOHOO for procrastination! Picked up 6 egos (well why not at the deal) and I'm so excited they just shipped out this morning!

Thanks again!

My pleasure! So many others have shared coupons of which I've taken advantage. Just sharing the luuuuuuuuv :D

(Didja get the pretty, blingy ones????)
 

MsLoud

Ultra Member
ECF Veteran
Verified Member
Dec 16, 2013
2,396
9,528
Got 3 Vision Spinners and I'm going to try the Spinner IIIs (they look cool) - May decide before the sale goes off to pick up a few more. The Vision Spinners I know will work fine (recommended by those in the know) so I wanted to make sure I got a few of them - and hubs can have his own!
 

Boden

Vaping Master
ECF Veteran
Sep 7, 2012
5,516
28,164
Lexington KY
Frog in Fog -- I paid $25, but woohoo! The price is now $19.95. Might be time to get another. :D (ETA: I used the "domestic expedited shipping", about $6-something, and got it in a couple of weeks).

Andria
Still trying to figure out how to pay for it since I don't use PayPal. Any ideas?
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
Still trying to figure out how to pay for it since I don't use PayPal. Any ideas?

Sure... you can use Paypal to pay for anything, you don't have to have a Paypal acct. And they are an industry leader in online security; they take it VERY seriously.

Andria
 
  • Like
Reactions: TrollDragon

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
At the moment I am a happy camper and P.O'd at the same time. Vape mail showed up today with my new glass for my Lemo II. Put it together, filled it with some ITC Berserker and started vaping it. At 30 it was good, at 35 watts it was pure chocolate bliss!Felt a little juice on it and wiped the glass off and kept vaping. Running the .5 Kanthal coil in it and it is vaping great with awesome flavor, but felt a little more wetness on it so wiped it down again and looked at it closely and the damn glass is cracked. I ordered 2 glasses but thats not the point. They are so thin that it takes nothing to crack them and thats not right. Im gonna keep vaping it as is because I am not dumping that tank but I also will not buy another lemo II no matter how well it vapes. And no, I didnt over tighten it.

In other news I swung by the local vape shop and looked over their RDA's. Was hoping they had a Varitas RDA but alas they didnt so picked up a Troll RDA that has a deep deck and a lot of positive reviews. Also picked up a Snow Wolf 200 watt temp control box. Also ordered off Ebay a Velocity RDA.

Haha I was the same way! I was having a discussion on making juice and attys and whatnot with forum member Sando7 a year or so ago, and brought up that I probably wouldnt ever get into drippers as my Protank 2 at the time seemed like it was "it" for me (it was the only tank I had tried after my Evods). Finally broke down and got a Magma after hearing all the raves about its flavor, but could never keep that thing from leaking on me so it went back on the shelf. Few months later I said screw it and got a Derringer to try out which totally changed the game for me. Its really hard to setup the Derringer for mouth to lung hits, but by the time I tried it, I was able to do lung hits with it and it was one of those "So THIS is what dripping is all about" moments. Between the Derringer and the Samurai Bonsai I have, I cant use my Kayfun 4s anymore they just dont cut it. Havent even touched one in almost 3 months now since the Bonsai showed up in the mail. One of these days Ill pick up the subohm kit and try one again, but I just cant deal with the lack of airflow anymore.. As flavorful as they were, they cant touch either of my RDAs as well. Those drippers definitely converted me to modwomping status.


When I first got the Kayfun V4's and kayfun lites there was no going back to Ego's. Just aint happening. Now with subtanks and RDA's the kayfuns are not satisfying. I still will use one of my kayfuns because it has my lemonaid juice in it but thats only occasionally.

I keep trying RDAs and my STM. I just don't get it. I don't think they work with a slow draw. If I gasp on them they work but I'm pretty sure that you shouldn't have to draw that much air to get them to work.

Ideas?


Have you tried lung hitting with your STM? I always did the mouth to lung but from that very first draw on the STM I new this was a lung hitter and it so smooth and natural that it felt like I been doing it forever. No coughing or anything, it was that smooth of a draw using my normal 3mg juice. Now thats the only way I like vaping and its only been since late may that I been using them.

Dripping is for people that still need more fidgeting with their hands. For a long time I thought dripping would be a PITA until I figured that out!

I also use STMs and think that each is a different tool for a different job. Like driving. I drive a stick and there is no way I can eat a Big Mac, with a coke in the other hand, and refill the dripper while shifting gears. At night. While Txting. During the day I can deal with it :)

Not really :) At least I won't admit it....


I cant agree with you there VNeil. Im pretty near a year since I dropped the smokes and I vape now only because I love to vape. My nicotine usage is 3mg and I can and occasionally do 0mg. Its not that I need it any more, its that I love it. With drippers they put out a lot more as well as deliver a lot more flavor. Same with a STM vs a Kayfun. The STM has a lot more airflow which means a lot more flavor vs the kayfun's restrictive airflow. With a flavor dripper you get a ton of airflow and a ton of flavor and as a bonus a ton of clouds.

If you want to drip, and still have a nice MTL draw without modifications or fighting with adjustments....pick up a couple of old school 510 or 306 non-rebuildable attys out of the clearance bins almost anywhere.


I have a pack of Smok 306 drippers and use them for flavor testing when I am experimenting with my mixing. They work real well.
 
  • Like
Reactions: TrollDragon

VNeil

Ultra Member
ECF Veteran
Verified Member
Jun 30, 2014
2,726
6,868
Ocean City, MD
I cant agree with you there VNeil. Im pretty near a year since I dropped the smokes and I vape now only because I love to vape. My nicotine usage is 3mg and I can and occasionally do 0mg. Its not that I need it any more, its that I love it. With drippers they put out a lot more as well as deliver a lot more flavor. Same with a STM vs a Kayfun. The STM has a lot more airflow which means a lot more flavor vs the kayfun's restrictive airflow. With a flavor dripper you get a ton of airflow and a ton of flavor and as a bonus a ton of clouds.
Just to be clear I really enjoy dripping. Both the fiddling and the flavor/vapor. Once I tried an STM my KFL+ went into immediate retirement and really the STM is probably at least as flavorful or better than my Troll drippers at the 25W max the STM seems to prefer (using the RBA deck). I do need to get out more and find a more flavorful dripper though. I'm sure I can beat the STM I just don't want to go through a hundred drippers to do it :)
 

ReigntheGamer

Account closed on request
ECF Veteran
Oct 14, 2014
5,979
26,132
At the moment I am a happy camper and P.O'd at the same time. Vape mail showed up today with my new glass for my Lemo II. Put it together, filled it with some ITC Berserker and started vaping it. At 30 it was good, at 35 watts it was pure chocolate bliss!Felt a little juice on it and wiped the glass off and kept vaping. Running the .5 Kanthal coil in it and it is vaping great with awesome flavor, but felt a little more wetness on it so wiped it down again and looked at it closely and the damn glass is cracked. I ordered 2 glasses but thats not the point. They are so thin that it takes nothing to crack them and thats not right. Im gonna keep vaping it as is because I am not dumping that tank but I also will not buy another lemo II no matter how well it vapes. And no, I didnt over tighten it.

In other news I swung by the local vape shop and looked over their RDA's. Was hoping they had a Varitas RDA but alas they didnt so picked up a Troll RDA that has a deep deck and a lot of positive reviews. Also picked up a Snow Wolf 200 watt temp control box. Also ordered off Ebay a Velocity RDA.




When I first got the Kayfun V4's and kayfun lites there was no going back to Ego's. Just aint happening. Now with subtanks and RDA's the kayfuns are not satisfying. I still will use one of my kayfuns because it has my lemonaid juice in it but thats only occasionally.




Have you tried lung hitting with your STM? I always did the mouth to lung but from that very first draw on the STM I new this was a lung hitter and it so smooth and natural that it felt like I been doing it forever. No coughing or anything, it was that smooth of a draw using my normal 3mg juice. Now thats the only way I like vaping and its only been since late may that I been using them.




I cant agree with you there VNeil. Im pretty near a year since I dropped the smokes and I vape now only because I love to vape. My nicotine usage is 3mg and I can and occasionally do 0mg. Its not that I need it any more, its that I love it. With drippers they put out a lot more as well as deliver a lot more flavor. Same with a STM vs a Kayfun. The STM has a lot more airflow which means a lot more flavor vs the kayfun's restrictive airflow. With a flavor dripper you get a ton of airflow and a ton of flavor and as a bonus a ton of clouds.




I have a pack of Smok 306 drippers and use them for flavor testing when I am experimenting with my mixing. They work real well.

Can't like this your having a rough time lately, may the vape gods give you favor for enduring. :D
 

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
Just to be clear I really enjoy dripping. Both the fiddling and the flavor/vapor. Once I tried an STM my KFL+ went into immediate retirement and really the STM is probably at least as flavorful or better than my Troll drippers at the 25W max the STM seems to prefer (using the RBA deck). I do need to get out more and find a more flavorful dripper though. I'm sure I can beat the STM I just don't want to go through a hundred drippers to do it :)


To me the STM is the closest ya can get to dripping, without actually dripping. Been thinking of picking up a couple regular subtanks just for the added volume it will hold.
As for going thru a bunch of drippers, I dont mind. I suffer from sever shinyitis :D
 

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
Can't like this your having a rough time lately, may the vape gods give you favor for enduring. :D

I hope the vape gods chill out a bit soon, Thats three glass tanks broken this week!
 
Status
Not open for further replies.

Users who are viewing this thread