Wellllp... feeling your pain. Jays lost it in the bottom of the 10th on what had to be the tightest review call I've seen all season. But hot damn was that ever a game. No complaints taken on pure entertainment value.
- Status
Wellllp... feeling your pain. Jays lost it in the bottom of the 10th on what had to be the tightest review call I've seen all season. But hot damn was that ever a game. No complaints taken on pure entertainment value.
I would love to try it out
Even if I have no idea which of all these spare o-rings go with it? I've got over a year's worth of little cellophane bags of screws and o-rings and little bluedrivers, no idea on earth which goes with what.
The posts on that have thumbscrews, another thing I hated about it. Phillips are by far my preference for ALL screws.
Andria
Now we are talking, 10ml's of Moshi Forest Hill in the Big-Tank with a dual 0.5Ω 26g build at 25W.
The atty is HUGE! I put the PMMA tank on to start with so I could get used to the juice control. It has 4 holes in it for juice flow and they are the size of Cleveland when opened up full, I have just a sliver open right now.
The airflow on it is not massive and it is by no means tight, but would not be anywhere near the STM.
juice control is very easy to turn and there is a fine balance of proper flow and flooding. A juice cup will catch all the excess but this is something that will need to be played with. I would advise shutting the juice control off when you go to bed, so you don't wake up to a possible mess. Better safe than sorry till it is tested with the control opened up.
The stock drip tip I don't like so I changed it for the ONLY one in my collection that would fit...
She's coming with me today to work and I'll have that tank drained by the end of it. Flavor is excellent and vapor production is very good. I'll update more when I had more time with it.
I am a little underwhelmed with it so far, but it has only been a few hours. There are a few minor annoyances, such as really, really tiny deck screws and my coil alignment slots don't quite line up on one side with the center of the air hole, odd DT size and easy to turn juice control. Screws can be changed, o-rings replaced and coils can be placed manually. There are also some burrs that the Dremel will take care of, but for 1/4 the price of an Authentic I am sure I will come to love this tank in all it's massive glory!
The atty is HUGE! I put the PMMA tank on to start with so I could get used to the juice control. It has 4 holes in it for juice flow and they are the size of Cleveland when opened up full, I have just a sliver open right now.
The airflow on it is not massive and it is by no means tight, but would not be anywhere near the STM.
juice control is very easy to turn and there is a fine balance of proper flow and flooding. A juice cup will catch all the excess but this is something that will need to be played with. I would advise shutting the juice control off when you go to bed, so you don't wake up to a possible mess. Better safe than sorry till it is tested with the control opened up.
The stock drip tip I don't like so I changed it for the ONLY one in my collection that would fit...
She's coming with me today to work and I'll have that tank drained by the end of it. Flavor is excellent and vapor production is very good. I'll update more when I had more time with it.
I am a little underwhelmed with it so far, but it has only been a few hours. There are a few minor annoyances, such as really, really tiny deck screws and my coil alignment slots don't quite line up on one side with the center of the air hole, odd DT size and easy to turn juice control. Screws can be changed, o-rings replaced and coils can be placed manually. There are also some burrs that the Dremel will take care of, but for 1/4 the price of an Authentic I am sure I will come to love this tank in all it's massive glory!
If its already got o rings on it, I can always try and find more on fasttech if neededEven if I have no idea which of all these spare o-rings go with it? I've got over a year's worth of little cellophane bags of screws and o-rings and little bluedrivers, no idea on earth which goes with what.
The posts on that have thumbscrews, another thing I hated about it. Phillips are by far my preference for ALL screws.
Andria
Can I help change your mind?
The mythical Robertson! They don't have a huge following around here and I don't know why.
Can I help change your mind?
Nah.. I don't have a tool for that; I've got phillips screwdrivers coming out my ears!
Andria
On the left is the Snow Wolf with the Troll RDA that I bought today along with the 2 bottles of juice. Was surprised the B&M I went to had the Snow Wolf for $149. On the right is my IPV4 with my Lemo II with the cracked glass and a long tip I picked up for it today. Vaping some ITC Berserker in it and it has excellent flavor even with me cutting it with %50 VG today. Very good juice.
Been wondering if my glass was cracked already when it arrived. No way I can prove it and it came well packed so I donno. Its not leaking so am gonna use it until it does.
If its already got o rings on it, I can always try and find more on fasttech if needed
Oh yeah, it's fully functional. Recently when I did all that tidying up, I removed the old coil/wick that was in it, but I haven't gone to extraordinary measures to clean it; I'm sure I rinsed it well when I put it away, just because juice traces get so gunky if you don't, but it could probably use a good boil. The driptip is one of kat's "pool noodles."
Andria
It does taste like pudding cups, those dark chocolate ones. I dont taste the Irish Cream either but it could be so well blended that it just adds to the over all goodness of it. I bought a 120 ml bottle of it around 9 or 10 months ago and vaped some of it then plumb forgot about it until I seen it the other day. It was 50/50 @6mg so I poured some onto a smaller bottle and added the same amount of VG to it and its perfect. Still has a strong chocolate taste to it.
I like the pool noodles... Even on my kf lite tootle puff set up I have a wide bore tip on itOh yeah, it's fully functional. Recently when I did all that tidying up, I removed the old coil/wick that was in it, but I haven't gone to extraordinary measures to clean it; I'm sure I rinsed it well when I put it away, just because juice traces get so gunky if you don't, but it could probably use a good boil. The driptip is one of kat's "pool noodles."
Andria
I am usually a mouth hitter, occasionally mouth to lung, and I drip exclusively. I used to play trumpet(badly) so I'm used to pulling a lot of air into my cheeks quickly, like a 2 second draw, but if you go up in resistance you can get a longer draw going, as long as it's steady. If the air doesn't at least move in the dripper it gets too hot. I run most of mine in the mid range of their air flow control, though the derringer is usually wide open in single coil mode.
1. chalice iii/derringerInformal polling... your most flavorful dripper for under $50 (clones are fine, I'm cheap
2. Veritas
3. igo l
4. igo w
I'll probably use my derringer more again, after I modify it for bf... the only gripe I have about it is the ridiculously tiny drip well, though that is part of why it tastes so good.
Is that a Mix Boy drip tip on there? I got one from 101 Vapes for my Magma and loved that thing but the damn delrin piece snapped in half using it in my Derringer and the metal tips only got one oring on it so its too wobbly to use on its own!
Just watched some videos on it...looks like something I could have fun withOh yeah, it's fully functional. Recently when I did all that tidying up, I removed the old coil/wick that was in it, but I haven't gone to extraordinary measures to clean it; I'm sure I rinsed it well when I put it away, just because juice traces get so gunky if you don't, but it could probably use a good boil. The driptip is one of kat's "pool noodles."
Andria
Mix Boy, so that is what they are called.Is that a Mix Boy drip tip on there? I got one from 101 Vapes for my Magma and loved that thing but the damn delrin piece snapped in half using it in my Derringer and the metal tips only got one oring on it so its too wobbly to use on its own!
Mine came from FT as it fits perfectly without the plastic part and looks great on the Origen Dripper 1:1 clone they used to sell.
$2.21 Grooved Round Mouth Drip Tip for 510 / ViVi Nova / DCT - stainless steel + acrylic / double o-rings at FastTech - Worldwide Free Shipping
The couple I have came with Red o-rings but the above picture shows Black.
Can I help change your mind?
I've done a bunch of renos in my time and I don't think I would be sane anymore without these puppies
. But for vaping hardware I think nothing beats allen heads with philips coming in second
I like the pool noodles... Even on my kf lite tootle puff set up I have a wide bore tip on it
Well... it's not really wide bore, it's fairly narrow actually, but it's just straight; the upside of that is, the bore is so narrow that the glass is thick, and would probably be much harder to break than other types of glass or pyrex driptips.
After I stopped using the tank, I tried using the driptip for other stuff, but I had already gotten to the point that I dislike clear driptips, because they show all that unsightly condensation inside -- if I don't see it, I don't worry about it but just swab it out as needed; when I can see it, I'm swabbing it out with every hit!
"Conversate" me your address, and I'll get it sent off this evening when the other half gets home from work.
Andria
- Status
Similar threads
- Locked
