- Status
That's why I keep trying to find a way to use some other flavor(s) -- the Capella Sweet Strawbery isn't bad, but it seems kinda weak to me, compared to the INW Shisha; my next trial will be to use 8% of the Capella, + 8% of the TFA Strawberry Ripe, to get to the 16% strawberry flavoring that I use with the Shisha, without the flavor going sideways. I found a 100ml bottle of the shisha in the classies for a good price, but it's a bit over half gone, so I keep trying to find ways to replace it.
Andria
My Big Tank is in BC, hopefully it will be here on Thursday and I can't wait! 
Todd reviewed the authentic M2/S1 and mine is the clone M1. There are only minor differences between the two versions and here's to hoping it will be as epic as he portrays.
Todd reviewed the authentic M2/S1 and mine is the clone M1. There are only minor differences between the two versions and here's to hoping it will be as epic as he portrays.
My Big Tank is in BC, hopefully it will be here on Thursday and I can't wait!
Todd reviewed the authentic M2/S1 and mine is the clone M1. There are only minor differences between the two versions and here's to hoping it will be as epic as he portrays.
I will be waiting on hearing your thoughts on that big boy!
Today its the same as usual! Samurai Bonsai with a single 1.0 coil on my Sigelei Mini. Womping some of Bills Magic Vapors Grape Bubbleburst recipe at 20w and vaping it up like theres no tomorrow! Got some Watermelon Bubbleburst on deck too, I finally found a mix that doesnt make TFA Watermelon Candy come out harsh tasting. Gotta change my wick out at some point, coils already black and goopy again and I have a feeling I burned out the middle of the wick like I always seem to do!
Got a new womper ordered.... Hope it ships fast
Sent with one hand, the other is busy vaping.
Sent with one hand, the other is busy vaping.
Got a new womper ordered.... Hope it ships fast
Sent with one hand, the other is busy vaping.
We will definitely need a report on this one! SXKs atty and mech clones are stellar so this sounds promising..
I have a new RTA coming today, the Aromamizer. I just watched a review where the guy was vaping it at 160W! I never thought a tank would be capable.
You can set it up for mouth to lung also
Is it the RDTA? I've had mine for a week now. It's a beast. Could be easier to fill, and the airflow control is a little janky, but all in all a great first effort. The build deck is sweet.
I just realized I got all that stuff to make that Grape Bubbleburst but I've never even opened the 4oz bottle of bubble gum I bought a while back while I was in a Nic induced fuge. Not sure I've tried the Grape Candy either.
Note to self....
Was digging around and found my misplaced Patriot RDA and decided to give it a vape. Dual coils at .4 ohms with cotton wick saturated with Ianwera Vanilla for pipe at 40 watts is a session in mod womping bliss!
Well... my titanium wire came today. Dinner is done, dishes are done, and I have time to fiddle with vaping hardware... but I gotta say, all the various things I've read about titanium... do this, don't do that, never do that other thing... have just terrified me to the point that I'm not at all eager to get into it. It seems like, if I start fiddling with this titanium, there's so many do's and don'ts with it, I'm taking my life in my hands just opening the pkg.
I posted this here rather than the titanium thread because they're talking about things in such a technical fashion, I'm not sure it even qualifies as English; I certainly don't understand a word of it.
Not a happy camper.
Andria
I posted this here rather than the titanium thread because they're talking about things in such a technical fashion, I'm not sure it even qualifies as English; I certainly don't understand a word of it.
Not a happy camper.
Andria
I do not understand what cautions need to be taken using Titanium, heck it is one of the least intrusive metals around.Well... my titanium wire came today. Dinner is done, dishes are done, and I have time to fiddle with vaping hardware... but I gotta say, all the various things I've read about titanium... do this, don't do that, never do that other thing... have just terrified me to the point that I'm not at all eager to get into it. It seems like, if I start fiddling with this titanium, there's so many do's and don'ts with it, I'm taking my life in my hands just opening the pkg.
I posted this here rather than the titanium thread because they're talking about things in such a technical fashion, I'm not sure it even qualifies as English; I certainly don't understand a word of it.
Nothing to worry about.Well... my titanium wire came today. Dinner is done, dishes are done, and I have time to fiddle with vaping hardware... but I gotta say, all the various things I've read about titanium... do this, don't do that, never do that other thing... have just terrified me to the point that I'm not at all eager to get into it. It seems like, if I start fiddling with this titanium, there's so many do's and don'ts with it, I'm taking my life in my hands just opening the pkg.
I posted this here rather than the titanium thread because they're talking about things in such a technical fashion, I'm not sure it even qualifies as English; I certainly don't understand a word of it.
Not a happy camper.
Andria
Notes: Spaced coils only, don't dryburn. That's about it.
If the wire has a coating of white stuff, wipe clean with damp cloth (if its from a vape vendor you won't have to worry about that).
Start with a simple 6-8 wrap coil, see how it goes
Ok, I finally worked up some courage and motivation; got the coil wrapped -- and I can easily see now why flaming or dry-burning isn't necessary or desirable, the stuff is a lot softer than kanthal.
I was aiming for .4Ω, around a 3/32 drillbit -- when I got it mounted, I tapped the fire button to see the resistance, and somehow it comes to .57Ω, much higher than I had aimed for, so I hope it will work. I got the Evic set to 340F, 30w.
But I'm still nervous as hell with this thing, so I took a pic; let me know if you see anything wrong with this, before I try to start vaping with it, PLEASE!
Biting nails...
Andria
I was aiming for .4Ω, around a 3/32 drillbit -- when I got it mounted, I tapped the fire button to see the resistance, and somehow it comes to .57Ω, much higher than I had aimed for, so I hope it will work. I got the Evic set to 340F, 30w.
But I'm still nervous as hell with this thing, so I took a pic; let me know if you see anything wrong with this, before I try to start vaping with it, PLEASE!
Biting nails...
Andria
Ok, I finally worked up some courage and motivation; got the coil wrapped -- and I can easily see now why flaming or dry-burning isn't necessary or desirable, the stuff is a lot softer than kanthal.
I was aiming for .4Ω, around a 3/32 drillbit -- when I got it mounted, I tapped the fire button to see the resistance, and somehow it comes to .57Ω, much higher than I had aimed for, so I hope it will work. I got the Evic set to 340F, 30w.
But I'm still nervous as hell with this thing, so I took a pic; let me know if you see anything wrong with this, before I try to start vaping with it, PLEASE!
Biting nails...
Andria
Looks good, now give it a vape and see how ya like it.
- Status
Similar threads
- Locked
