The Womper Woom OR You Might Be A Modwomper

[Boden]

Hope so too, waiting sucks

I have a Velocity rda .....clone by Tobeco coming tomorrow.

I NEVER usually by clones but I have heard so many great things about this one that I decided to give it ago. My friends swear by them, I cannot tell you how many times one has been pushed in my face haha, I'm lazy, it has to be a dam good, easy to work on deck which this is, so probably do a nice simple build to show you tomorrow, Dual 24 awg Kanthal, 6 wraps...Hmmm, should be about .2 - .25ohm. 60w.

Got some wraps coming, one for the cuboid mod and got another mod coming and I think another drip tip, hopefully some matchy matchy and it should come together nicely and look dam good.

What can I say, I retired early, I get bored, any excuse to justify it works for me but at least Im not sitting with an ash tray in front of me smoking 60 a day, which is what I was doing.

Cloud comp build: triple parallel 30g/0.254mm, 8wrap, 3mm ID, 0.45 at 8.2V = 150W = chuckin da klouds

The key to the Velocity is to keep the coils high so when you look through the air slots you should see the bottom half of the coil.

Keep the indirect air off.

 

[Rixsta]

Man I Love my Velocity!!! I used my Indulgence V4 and thought that was great. Bought a Velocity from Tobecco and this thing is unreal. Air flow is ridiculous!! Easy to build, nice large holes for thick wires. I have a dual clapton build in there now at .35 and it chucks!! Flavor is really good as well!

I might do a twisted Kanthal build tomorrow, I twist my own, it's cheaper and effective.

I use this method if anyone is interested, it works so well.

The 5 Minute Guide to Twisting Kanthal for Atomizer Coils

I tried my friends with my own juice, no sub ohm tank can compare to it, if anything, I'd have mix my juice flavors at a lower percentage hahaha.

Can I ask, it's a bit of a silly question ..I know the juice well is deep on the Velocity, how many pulls do you get before you have to drip again?

 

[Rixsta]

Yesterday made an order with bullcity for a bunch of flavors I been needing and then this morning I wake up early, go to mix up 350 ml of the Unicorn milk clone (Im almost out) and didnt have any Vanilla bean ice cream so had to make a second flavor order.
It looks like the Aspire Atlantis mega will be here today with the 5 pack of coils.

Can you share your Unicorn Milk clone please, you know I love anything like that

 

[Boden]

I might do a twisted Kanthal build tomorrow, I twist my own, it's cheaper and effective.

I use this method if anyone is interested, it works so well.

The 5 Minute Guide to Twisting Kanthal for Atomizer Coils

I tried my friends with my own juice, no sub ohm tank can compare to it, if anything, I'd have mix my juice flavors at a lower percentage hahaha.

Can I ask, it's a bit of a silly question ..I know the juice well is deep on the Velocity, how many pulls do you get before you have to drip again?

I would take a simple parallel build over a twisted wire build.

Number of puffs would depend on the wire gauge, width and ID of the coil and the watts produced.

 

[Rixsta]

Cloud comp build: triple parallel 30g/0.254mm, 8wrap, 3mm ID, 0.45 at 8.2V = 150W = chuckin da klouds
View attachment 527074

The key to the Velocity is to keep the coils high so when you look through the air slots you should see the bottom half of the coil.

Keep the indirect air off.

Thanks, ah yes, my friend said you need to see them throught the smiley face, thanks for the heads up.

 

[Boden]

That said, at 150W from that 30g build I got 3 pulls before I had to put another 10 drops in.

 

[chopdoc]

Here is my vaping line up.

From left to right, 2 subtank mini's on Clouper mini's. Uwell Rafale on an Istick 100W, then 2 Uwell Crowns on an Xcube II and an IPV4. Next is two TFV4's, one on a reuleaux 200 and the other on a Snow wolf. On the right side the blue one is the Tobeco Super Tank and the Arctic V8, both on Istick 100W's. And laying down on the left it the Herakles on a Smok M80 Plus and the Sense Cyclone on an Evic VT.

 

[chopdoc]

Can you share your Unicorn Milk clone please, you know I love anything like that

 

[Rixsta]

This is awesome, thank you so much, I will make some up.

 

[MikeyConti]

Here is my vaping line up.

From left to right, 2 subtank mini's on Clouper mini's. Uwell Rafale on an Istick 100W, then 2 Uwell Crowns on an Xcube II and an IPV4. Next is two TFV4's, one on a reuleaux 200 and the other on a Snow wolf. On the right side the blue one is the Tobeco Super Tank and the Arctic V8, both on Istick 100W's. And laying down on the left it the Herakles on a Smok M80 Plus and the Sense Cyclone on an Evic VT.

Nice collection!
Regular Clouper Minis or the Plus?

 

[chopdoc]

This is awesome, thank you so much, I will make some up.

I have vaped many bottles of the real stuff. This is spot on.

 

[Rixsta]

I have vaped many bottles of the real stuff. This is spot on.

Just way way cheaper, I love the stuff too !

 

[Rixsta]

Cancelled my Velocity RDA by Tobeco after doing some homework myself and ordered the Mini instead.

 

[Rixsta]

That annoying moment when you have to buy Velocity slotted screw sets because the stock ones are terrible. I just built on my buddy's deck and there is no way I'm putting up with those.
The annoying part was the shipping I had to pay from the US but they are so popular that I had to snap a set up.
Ahhh this vaping game is never ending.

 

[Atchafalaya]

Here is my vaping line up.

From left to right, 2 subtank mini's on Clouper mini's. Uwell Rafale on an Istick 100W, then 2 Uwell Crowns on an Xcube II and an IPV4. Next is two TFV4's, one on a reuleaux 200 and the other on a Snow wolf. On the right side the blue one is the Tobeco Super Tank and the Arctic V8, both on Istick 100W's. And laying down on the left it the Herakles on a Smok M80 Plus and the Sense Cyclone on an Evic VT.

I'm envious. Green with envy.

 

[Rixsta]

I just couldn't justify the postage and cancelled my order, second of the day, ow I'm a rebel.
I'll just get a better hex wrench I guess and be careful.

 

[Rixsta]

I'm envious. Green with envy.

From what I saw on your name tag, it looked liked you just escaped from an institution, I'll take green any day hunny

 

[Boden]

I are happy

 

[Boden]

I just couldn't justify the postage and cancelled my order, second of the day, ow I'm a rebel.
I'll just get a better hex wrench I guess and be careful.

I've never had a issue with the hex grubs. Mine are authentic though.

 

[Rixsta]

I've never had a issue with the hex grubs. Mine are authentic though.

If I like it I will most definitely show my support and buy an authentic one, pretty sure they have released a mini version too. This is a dip my toe in the water jobby, it's very rare I build my own coils, I'm a tank guy with pre made coils. It wasn't really until yesterday when I kinda got the satisfaction bug when I built on my friends deck, vaping on my coil and my own juice.

I are happy
View attachment 527137

That is well nice..