Things the HH-357 have made me realize.

[korndizl]

I use a 6v mod with the 3.0 357 short barrel..for the spitting i solved it right away...no matter how hard i wanna hit it i never get hit with blazin hot drops...all i did was i cut one of the carto condoms the long way making sure to keep to bends/crimps made it just wide enough to slide inside my drip tip...i havnt had any problems at all with spitting since. (btw it wasnt one of the long carto condoms people use for filling cartos somtimes, it was one of the smaller ones...but not the smallest one) i wish i could explain this better...i hope this helps someone with the spitting.


Also because u leave the bends in the cut when u slide it in the drip tip it will not ever fall out no matter how hard u blow into it when u clean it..or when your vapeing does not affect the draw either ..need a tweezers to get it out...i love it.

 

[pmoraldo]

I use a 6v mod with the 3.0 357 short barrel..for the spitting i solved it right away...no matter how hard i wanna hit it i never get hit with blazin hot drops...all i did was i cut one of the carto condoms the long way making sure to keep to bends/crimps made it just wide enough to slide inside my drip tip...i havnt had any problems at all with spitting since. (btw it wasnt one of the long carto condoms people use for filling cartos somtimes, it was one of the smaller ones...but not the smallest one) i wish i could explain this better...i hope this helps someone with the spitting.


Also because u leave the bends in the cut when u slide it in the drip tip it will not ever fall out no matter how hard u blow into it when u clean it..or when your vapeing does not affect the draw either ..need a tweezers to get it out...i love it.

guess I need a visual cuz I don't understand

 

[casualuser]

Yea I don't get this either. Sounds like it would restrict the airflow....

I use a 6v mod with the 3.0 357 short barrel..for the spitting i solved it right away...no matter how hard i wanna hit it i never get hit with blazin hot drops...all i did was i cut one of the carto condoms the long way making sure to keep to bends/crimps made it just wide enough to slide inside my drip tip...i havnt had any problems at all with spitting since. (btw it wasnt one of the long carto condoms people use for filling cartos somtimes, it was one of the smaller ones...but not the smallest one) i wish i could explain this better...i hope this helps someone with the spitting.


Also because u leave the bends in the cut when u slide it in the drip tip it will not ever fall out no matter how hard u blow into it when u clean it..or when your vapeing does not affect the draw either ..need a tweezers to get it out...i love it.

 

[rustybikes]

I use a 6v mod with the 3.0 357 short barrel..for the spitting i solved it right away...no matter how hard i wanna hit it i never get hit with blazin hot drops...all i did was i cut one of the carto condoms the long way making sure to keep to bends/crimps made it just wide enough to slide inside my drip tip...i havnt had any problems at all with spitting since. (btw it wasnt one of the long carto condoms people use for filling cartos somtimes, it was one of the smaller ones...but not the smallest one) i wish i could explain this better...i hope this helps someone with the spitting.


Also because u leave the bends in the cut when u slide it in the drip tip it will not ever fall out no matter how hard u blow into it when u clean it..or when your vapeing does not affect the draw either ..need a tweezers to get it out...i love it.

Count me in the "need a visual" crowd. I have an image in my head of how this works/looks, but experience has cruelly taught me that my imagination sucks...

 

[BlueWater]

...but experience has cruelly taught me that my imagination sucks...

LOL...too funny!

 

[magsmerlin]

hello everyone.
I have had my 357 shorty since december. it's still working. I use 60vg/40pg. is this ok to use on the 357? its 2.0 ohms if i'm remembering correctly. i clean it in vodka once a week for about an hour. I'm just amazed by it. i have a long barrel that i've tried using. I just dont like it. i like the warmer vape. wonder if i called them if i could swap the longer barrel for a short one.

 

[Chinner]

+4 for visual needed lol..

I bought a 1.5 357 with the short body and all I've learned is that some juice tastes better then others. No matter what I do, it just spits hot liquid in my mouth all day lol... It does vape really well, but I haven't touched it in weeks now because of the juice mouth.

 

[TheSneakerHoarder]

Just_keep_practicing...it_gets_easier,_I_promise.

 

[TheSneakerHoarder]

Oh...

And_don't_bother_using_a_pipe-cutter_to_shorten_a_long-barrel...it_makes_the_tip_not_fit...

Ask_me_how_I_know.

 

[PerfectELu]

I bought two, call it novice-itis or what ever....but neither lasted over a day...actually...the first lasted 3 hits and I did exactly what the instructions said...and I actually flooded it i think. So...figuring that I screwed up the first one...I was SUPER careful on the second one...it lasted less than 10 hours and was burnt. Not sure if I want to fork out 22.00 for a third try....I am amazed at the comment that it lasted for months so far. I am using a REO at 3.7 volts both were short barel 1.5's...not sure why mine died so quick. Anyone do something different than soak for 30sec and then re-drip and vape?

 

[Mudflap]

I bought two, call it novice-itis or what ever....but neither lasted over a day...actually...the first lasted 3 hits and I did exactly what the instructions said...and I actually flooded it i think. So...figuring that I screwed up the first one...I was SUPER careful on the second one...it lasted less than 10 hours and was burnt. Not sure if I want to fork out 22.00 for a third try....I am amazed at the comment that it lasted for months so far. I am using a REO at 3.7 volts both were short barel 1.5's...not sure why mine died so quick. Anyone do something different than soak for 30sec and then re-drip and vape?

I'd e-mail Hanna ( hybridvapes@gmail.com ) and ask for his input.

 

[pmoraldo]

Oh...

And_don't_bother_using_a_pipe-cutter_to_shorten_a_long-barrel...it_makes_the_tip_not_fit...

Ask_me_how_I_know.

a dremel with a cutoff tool would probably work better

 

[mwa102464]

+4 for visual needed lol..

I bought a 1.5 357 with the short body and all I've learned is that some juice tastes better then others. No matter what I do, it just spits hot liquid in my mouth all day lol... It does vape really well, but I haven't touched it in weeks now because of the juice mouth.

@ Chinner,

Put a cherryvapes universal tip on that shorty 1st then a drip tip on top, will vape like Bliss

 

[AmnNate]

I bought two, call it novice-itis or what ever....but neither lasted over a day...actually...the first lasted 3 hits and I did exactly what the instructions said...and I actually flooded it i think. So...figuring that I screwed up the first one...I was SUPER careful on the second one...it lasted less than 10 hours and was burnt. Not sure if I want to fork out 22.00 for a third try....I am amazed at the comment that it lasted for months so far. I am using a REO at 3.7 volts both were short barel 1.5's...not sure why mine died so quick. Anyone do something different than soak for 30sec and then re-drip and vape?

I agree with Mudflap, email Hannah. Both my 357s have lasted me over 2 months! There must be something wrong with them.

 

[J**2]

Has anyone had experience with the custom HH 357 option (25$!!) where you can specify what kind of juice you are using? You can specify 100% PG, 100% VG or combination.


GG, Provari, iatty2, DIY wannabe chef

 

[J**2]

Anybody there ??


GG, Provari, iatty2, DIY wannabe chef

 

[Rhapsodies Fire]

I haven't but surely someone around here has.

 

[ukeman]

I have one of both custom 510 Lr and 901 LR... but i ordered pg/vg. Honestly, I'm not the most astute scientific type and I don't notice the subtle differences; also a an HH newb... been through 3 the last 3 weeks... actually one died and 2 still going.
I like the 901's.
Looking forward to V2... as you've read, you can only get V2 on the current customs until there is sufficient materials for the standards converted to V2.
So in that sense you will get a difference if you get the V2 Custom.
I hear the VG custom is super for all VG users!
I recently ordered a couple customs in order to get the V2 HH357.

 

[ukeman]

the HH357 back to the OP post; has made me realize that this type of vape is the ultimate IMO. I have 2 mods with a HH357 on them because when one gets hot, the other one is ready to go....
The other atomizer i have on hand is the i06 which is close but in second place... well worth having too.
If a rebuildable can give as much or close flavor and vapor, I'll have one or two keepers too.
When a vape really counts, this is the ultimate....

Anybody using rebuildables on their Reos?

 

[AZCraig]

Yeah, you want to be at 5.5 volts on your Provari with anything 3 ohms.

Maybe you guys can help me out a little. I got a HH .357 a couple days ago followed the directions but the flavor is muted to me. My Juice is 60/40 vg/pg its a 3.0 ohms 357 using it at 5 volts I am new to attys too doin 5 drops at first I hear the gurgle and everything can anyone help. I have it sitting in alcohol now maybe I flooded too much.