Tiny Mod

Status
Not open for further replies.

Sci

Super Member
ECF Veteran
Dec 12, 2009
846
13
Al
I used this box(there are two small supports that have to be clipped out), switch, connector, battery contact, & this battery.
Also using this adapter & a 510 carto.
The extra long red wire is so I can add a master slide switch later.
The battery is a little too long to use 2 battery terminals, so I used copper foil tape(2 layers) for the positive terminal.
It also wouldn't hurt to grind a little out of the bottom & top. It closes, but it's tight.


4504497146_2b6ab84ce0_o.jpg

4504497304_2dde39e4e7_o.jpg

4503864609_f65835b73b_o.jpg

4503864763_7a1245203f_o.jpg

4504497800_a798b124fc_o.jpg


This little mod works great. I'm vaping it as I post.:)
I'll add a pic with the master switch when I install it. I've got something else working at the moment.
 

Connman

Super Member
ECF Veteran
Verified Member
Dec 6, 2009
903
52
62
North Florida, USA
Cool Sci I made one shown below but used a smaller battery a 14250 350mAh.
Was thinking of posting it but then it really isn`t finished. It also has a fast changing LED. I want it juice feeder or another battery for 5 volt. That seems to be the same switch you used. I like that switch for this box.



No battery shot

Picture2.jpg




Battery and 3 ml bottle

Picture3.jpg




Closed and in hand

Picture4.jpg
 

Sci

Super Member
ECF Veteran
Dec 12, 2009
846
13
Al
Cool Sci I made one shown below but used a smaller battery a 14250 350mAh.
Was thinking of posting it but then it really isn`t finished. It also has a fast changing LED. I want it juice feeder or another battery for 5 volt. That seems to be the same switch you used. I like that switch for this box.

That is tight. I'll bet that's sharp when you fire it up! Make a juice feeder out of it & use an LR atty with it. Get the best of both worlds. Post it when you finish it, I want to see it lit up.
I like that switch. I've got a couple of black flashlights that use that one(black).
On mine, I've got some tiny rare earth magnets that I am going to glue to the lid & see if they'll hold it on with the screws in the bottom.
I went with the 16340(880 mAh) because I wanted duration. They're a tight fit, but last a long time.
 

Connman

Super Member
ECF Veteran
Verified Member
Dec 6, 2009
903
52
62
North Florida, USA
I do wish it had a larger mAh battery but with the fast changing LED I find that as soon as it turns to real fast I`m satisfied with the hit and stop. So it`s like is a perfect timer and one of these charges I`m going to count just how many hits it will provide before needing recharged.

I also was thinking magnets but I need smaller ones yet. I only have one screw in it since the bottle needed more space. The switch worked out tight on the other screw but perfect fit. I will for sure post pictures once I complete the juice tub end of this. Need my sisters help there possibly. :)
 

Sci

Super Member
ECF Veteran
Dec 12, 2009
846
13
Al
Last edited:

dreams n chains

Super Member
ECF Veteran
Nov 7, 2009
467
4
Florida
....but thats a magnet

Think that was just a typo.

You do some beautifully neat work Sci! Very well done.

I really must look into that copper tape. And magnets?! Did someone mention Magnets?!!! I do love magnets! I'll have to see about ordering some next payday.

Connman making a juice feeder? :mad: Better not be stealing any of my tubing. Let me get off of here and go check my Modding Tackle Box Thingy to see if anything is missing!
 

Sci

Super Member
ECF Veteran
Dec 12, 2009
846
13
Al
Think that was just a typo.

You do some beautifully neat work Sci! Very well done.

I really must look into that copper tape. And magnets?! Did someone mention Magnets?!!! I do love magnets! I'll have to see about ordering some next payday.

Connman making a juice feeder? :mad: Better not be stealing any of my tubing. Let me get off of here and go check my Modding Tackle Box Thingy to see if anything is missing!

I appreciate it Dreams.:)
That copper tape is a Godsend sometimes. I got it on Ebay, pretty cheap.
You like magnets? Look here(this link is good for 28 more days). Check out the 'see other items', they've got all kinds & they are super strong! It's hard to pull a stack of those tiny ones apart!
 

dreams n chains

Super Member
ECF Veteran
Nov 7, 2009
467
4
Florida
I appreciate it Dreams.:)
That copper tape is a Godsend sometimes. I got it on Ebay, pretty cheap.
You like magnets? Look here(this link is good for 28 more days). Check out the 'see other items', they've got all kinds & they are super strong! It's hard to pull a stack of those tiny ones apart!

Thank you for the links Sci!:)
I had put up a post thanking you the other night but when I clicked to submit... it gave me an error page.

I've got them saved in my watching on my eBay and going to try to get some next payday.

And both those sellers have other interesting things.... I need to hit the Lotto too.:(


Could've used some of that copper tape recently on my latest mods... but the solid project board that MadVapes carried is working out wonderfully for the strength I needed in this particular one.

Printed Circuit Boards

But they are sold out now. :(
 

Sci

Super Member
ECF Veteran
Dec 12, 2009
846
13
Al
Thank you for the links Sci!:)
I had put up a post thanking you the other night but when I clicked to submit... it gave me an error page.

I've got them saved in my watching on my eBay and going to try to get some next payday.

And both those sellers have other interesting things.... I need to hit the Lotto too.:(


Could've used some of that copper tape recently on my latest mods... but the solid project board that MadVapes carried is working out wonderfully for the strength I needed in this particular one.

Printed Circuit Boards

But they are sold out now. :(

No problem,. I really need to stay off of Ebay late @ nite. Too much cool, & mostly cheap, stuff!:)
 

CloudBurst

Unregistered Supplier
ECF Veteran
Jun 2, 2009
3,064
288
Georgia, USA
I like it...which blue box is it? I see mad vapes has 2.
Cool Sci I made one shown below but used a smaller battery a 14250 350mAh.
Was thinking of posting it but then it really isn`t finished. It also has a fast changing LED. I want it juice feeder or another battery for 5 volt. That seems to be the same switch you used. I like that switch for this box.



No battery shot

Picture2.jpg




Battery and 3 ml bottle

Picture3.jpg




Closed and in hand

Picture4.jpg
 

Connman

Super Member
ECF Veteran
Verified Member
Dec 6, 2009
903
52
62
North Florida, USA
Hi storminyte,
It`s this one
Project Box 1.97 x 1.38 x .79
There was a solid white one as well

Nice and small it is.
Now I just need to locate my sisters mod box for some stuff like the brass tube thing and small plastic hose piece. Then I`ll be set. I was thinking I could say I picked up all her stuff she must have left it out and the dogs had it. :confused:

It`s not like I`ve ever blamed them for my gas issues so I owe them this one. :) Dogs are good for such things. The cats knock it down and the dogs always go right for it. :thumb:
 
Last edited:

hoogie76

Unregistered Supplier
ECF Veteran
Aug 1, 2009
2,955
659
Charlotte, NC
Hi storminyte,
It`s this one
Project Box 1.97 x 1.38 x .79
There was a solid white one as well

Nice and small it is.
Now I just need to locate my sisters mod box for some stuff like the brass tube thing and small plastic hose piece. Then I`ll be set. I was thinking I could say I picked up all her stuff she must have left it out and the dogs had it. :confused:

It`s not like I`ve ever blamed them for my gas issues so I owe them this one. :) Dogs are good for such things. The cats knock it down and the dogs always go right for it. :thumb:


Like an immediate clean-up crew :)
 

CloudBurst

Unregistered Supplier
ECF Veteran
Jun 2, 2009
3,064
288
Georgia, USA
I don't see the white one! Hoog, is there still white?
Dude, if you know what's good for you, you'd better stay outta Dream's stash! I'm gonna tell!
Hi storminyte,
It`s this one
Project Box 1.97 x 1.38 x .79
There was a solid white one as well

Nice and small it is.
Now I just need to locate my sisters mod box for some stuff like the brass tube thing and small plastic hose piece. Then I`ll be set. I was thinking I could say I picked up all her stuff she must have left it out and the dogs had it. :confused:

It`s not like I`ve ever blamed them for my gas issues so I owe them this one. :) Dogs are good for such things. The cats knock it down and the dogs always go right for it. :thumb:
 
Status
Not open for further replies.

Users who are viewing this thread