Tips & where to buy stuff for Iatti

[stv888]

Hi guys & GG fans!

Seeing that the Iatti is the ultimate modding tool & is very open to experimenting,

please post here your experiments & success with Iatti combinations.

Also please post links to web stores that sells wick,Resistance & non resistance wires.

I would also would love to hear if anyone tried different wick & or wire combinations.

 

[dspin]

This should be a great thread for ideas

 

[eyebrook]

Hi All Resistance wire here
tinypay.me » Search

 

[lordbyron77]

mesh you can order from here:
The Mesh Company (Warrington) Ltd Ultra Fine 400 Mesh


fiberglass
Zubehoer und Preise fuer Kapillarbewaesserungsanlagen
or:
S1RFW1 Braided fiberglass wick approximately 1/16 inch diameter. SKU: 1376-100 Round Fiberglass Wick. Spool size 100 yards. - WickStore.com

To prepare the mesh, you need the burner
$11.99 - HONEST Extra Large Butane Jet Workshop Torch - Lighter Torches

shop
1/16" Glaswik
S1RFW1 Braided fiberglass wick approximately 1/16 inch diameter. SKU: 1376-100 Round Fiberglass Wick. Spool size 100 yards. - WickStore.com
Oil Lamp Heater and Stove Wicks
wires.co.uk : Bare Nickel Wire
Nichrome Wire
wires.co.uk - specialist in craft wire, knitted craft wire, silver wire, enamelled copper, resistance wires, stainless steel, plated wires and many more!
Kanthal D - 0.16 mm - 10 m - 66.9 ohm/m »
PnJ Resources, LLC : Nichrome 80

 

[lordbyron77]

double post, remove

 

[RippleInStillWater]

Man, more stuff to buy.........

Thanks for the links.........

 

[ainako]

I noticed kanthal has a higher ohm rating per meter compared to nichrome, just an fyi. Nichrome coils will be SLIGHTLY longer than kanthal ones.

 

[lee72]

Had a bit of a leaking issue today. Stripped the iAtty down and discovered the smaller of the two o rings on the ceramic cup was split. I also noticed while I was investigating that the ceramic cup 'stem' was a fraction too long in the hole. I took it out and sanded it down so it now fits snuggly in the top part.

I paid more attention to ensuring all the pieces went together firmly when I reassembled and it's vaping like a champ again. I just need to find another o ring to replace the broken one.



Another thing I'd like to mention is I've been using mine with the cone screwed on fully and had no problems with wicking.

 

[Dream]

Where are the specs for the R and NR wires to be found? I recall reading it somewhere here.

Also, has anybody found a good source located in the states? it's hard to justify paying for international express mail. :/

 

[fright88]

"Wick was bought from here:

http://www.wickstore.com/Products/Ro..._1376-100.aspx

no resistance wire was bought from here:

http://www.wires.co.uk/cgi-bin/sh000...#aNI0236_2d050 50g 0.236mm Nickel Wire

heating wire was bought from here:

wires.co.uk : Bare Nickel Chrome / Nichrome Section 50g 0.16mm Nickel Chrome Wire
or if you want thinner wire you can buy 0,122mm ir 0,132mm"

Quoted from first post in iAtty Sticky thread