Titanium Genisis P.V.s from Bluefoxvapor.com

Status
Not open for further replies.

TitaniumFlame

Unregistered Supplier
Nov 27, 2011
39
77
42
Florida
bluefoxvapor.com
Hello all, id like to first thank all of you guys out there who make this possible. If it wasn't for sites like this , and all you guys out there building mods, i probably would have never started building them myself. Ive been building mods for a while now, but have just recently began advertising. I will do my best to answer all questions, and explain exactly how i build these devices.The mod im building is an all Titanium genisis hybrid , and the genisis will thread out of the battery tube and can be replaced with a standard 510 connection top cap. The switch is a unique magnetic design..There is a magnet that is pressed into a piece of delrin, that attaches to the back of the battery, and it opposes two 1/8" x 1/8" magnets recessed into the switch. This allows for a short overall design, is pocket friendly, and fires every time you want it to. one of the magnets can be removed for a very light throw. The genisis is also all titanium, and the top cap threads on. other than the two o-rings that seal the juice in the tank, i use an o-ring above and below the quartz glass to isolate it from toutching any metal directly. This allows it to absorb a shock pretty well...I came to this design because im hard on my mods, and it has been the only way ive been able to keep from breaking glass. Once the genisis section of the device has been machined , delrin is pressed all the way through, followed by the positive connection post ( 3/16") witch is titanium as well. I have used stainless for this in the past. it makes for a very durable design. I will post some new pictures here and on the website tomorrow, but will attach a few of mods i have built that are nearly identical to the production models I'm building now. The mod will be available in 18350,18500, and 18650, and if you are interested in one of these devices, go to the website to register and i will add you to the list.(no cost, first come first serve ) There will be some ready within about a month, and i will try to keep them in stock. razr november 3045.jpg2012-09-30_12-44-20_899.jpg2012-10-10_15-50-40_516.jpgrazr november 2957.jpg18500 parts.jpg
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Congrats on the ECF status. I have been corresponding with Bluefox for a couple weeks since I discovered them, He is very courteous and informative. He has a lot of pride in what he makes and is eager to please you and give you honest advise and direction to make sure you are satisfied with his devices. His product warranty is amazing and he is able to make customizations to make it a truly unique and rugged as well as beautiful , Good luck and I hope when Im ready to place my order that you are not overwealmed with so many orders that I have to wait for weeks. Actually I would wait, because when you are buying from a person that makes everything as ordered its expected. Thats what distinguishes quality from mass produced products made in assembly lines where quality control is harder to control.

You all know im a big fan of custom made to order MODs such as my Saber Touch, so much so I have another one on its way. These Bluefoxvapor titaniums are my next venture into something different and custom.
 
Last edited:

TitaniumFlame

Unregistered Supplier
Nov 27, 2011
39
77
42
Florida
bluefoxvapor.com
Hi all, I wanted to let you guys know everything is moving along nicely. I have a large DC power supply on the way to anodize the titanium. Using this method instead of heat treatment will allow a completely uniform color..ill attach a picture of the color spectrum possible using electricity to anodize the titanium titanium voltage chart.jpg
 

TitaniumFlame

Unregistered Supplier
Nov 27, 2011
39
77
42
Florida
bluefoxvapor.com
I will be adding one of a kind hand turned Ti drip tips on the website as soon as i get a chance...i will also put up a number of standard tips, shaped more or less like the black delrin ones everywhere. The standard tips will be 20$,The custom tips will be 35. attached is a pic of a custom tip..If you want a drip tip machined using your own design, you can send me an e-mail with a basic sketch and ill add it to the custom tips for you to purchase on the site. with the custom tips you will be buying the actual tip pictured in the site, each one of a kind.razr photos16gb 11131.jpgrazr photos16gb 11091.jpgrazr photos16gb 11100.jpg
 
Status
Not open for further replies.

Users who are viewing this thread