Good to see, and I have done my job if this will be one of your go to P.V.s. . Any thoughts on ways to improve device without compromise in another area? The waiting problem is solved, devices will be sold on advancedpersonalvaporizers.com (link on Bluefoxvapor.com), and you will have To make contact with me first. Have approx. 20 full sets of parts machined within last few weeks, but will list them as I fit and finish each one individually.
Titanium Genisis P.V.s from Bluefoxvapor.com
- Thread starter TitaniumFlame
- Start date
- th_trl_thread_readers 0
- Status
With the tank, its best to take it slow and make sure its going on straight , lube the o-ring with some vg, and youll be good to go. Id leave the glass on until broke. One thing I have found is that flame polishing the quartz greatly reduces chance of breakage, as there are no corners. the glass manufacturer confirmed this. I have about 150-175 quartz glass tanks already, if people want them flame polished I could set up and do this but it will not be cost effective..prob 10-15 $ a piece. im sure someone else can do it cheaper.
I noticed the new pv does not have vent holes. Is there a reason for this or is it just for aesthetics?
I was told it shipped, as of last week, priority from Florida to me is 2 days MAX.
I contacted Travis Friday than Saturday, and Monday, Tuesday and yesterday.
He said he shipped it to Canada by accident, He still hasn't provided a tracking number or any response since I was told it was shipped to Canada.
Impressive isn't it? Vabeach , im glad you are happy with mod, send me a text to remind me exactly what you need, and ill hook u up. Oh, ive got some 1.25" long 25mm id 28mm od fused quartz tanks with flame polished ends on the way...And I have started machining some 1.25" solid bar...NEXT....Since what I say is a public discussion ill lay it out there for yall to speculate on and to talk about. I have yet to read through all of this, but will say everyone who has paid for a mod has it, or it is in the mail. The guy in the U.K. probably hasn't received his yet, but the others have....This has been a cluster from the beginning, I should have just refunded the people the money when I realized it was going to be quite an ordeal working on this machine. However I offered to refund everyone numerous times, and everyone wanted to wait...i had a bad feeling about it though, and sure enough..go a few days without looking through email, and get two charge-backs. Then as I exchange emails with these folks, they don't bother to even tell me, until I ask. im not ...... at all, but I am not really interested in selling these to people who cause me any grief. I wouldn't sell one to the troll who made the above comment for 1,000$. but I have given several away...that speaks for itself. I build these right by my lonesome, and spend probably 6 hrs a piece with my hands on every one even with the cnc machine. I am no thief or con, I hate em. if I were, I would have collected thousands of dollars and been long gone. i build these because I can, any craftsmen out there understands the satisfaction one gets from doing work most people could not. The same reason a machinist would build a miniature internal combustion engine...Also because I believe I am building one of if not the best all round mods out there, at 1/2 the price of what the others would charge. Ive seen many mods, and all but a few were unimpressive. And it is beyond me why people equate fine threads with quality...ill post in a few min , for suggestions and hopefully a constructive conversation. I Do not have my hopes up...
For the record I was never offered a refund, I just sent you my paypal receipt via text, it has my info on it.
I WILL EXCEPT A FULL REFUND, If the mod shows up I'm sure you wont mind waiting 6 months or so for my payment.
Man you got a lot of faith and patience.
Must be the beard that gives you such super human strength.
As much i'd love one, i would've ended in a psychiatric ward by now if i had to wait that long and still hope for a happy ending.
Knock on wood and fingers crossed for you.
Impressive isn't it? Vabeach , im glad you are happy with mod, send me a text to remind me exactly what you need, and ill hook u up. Oh, ive got some 1.25" long 25mm id 28mm od fused quartz tanks with flame polished ends on the way...And I have started machining some 1.25" solid bar...NEXT....Since what I say is a public discussion ill lay it out there for yall to speculate on and to talk about. I have yet to read through all of this, but will say everyone who has paid for a mod has it, or it is in the mail. The guy in the U.K. probably hasn't received his yet, but the others have....This has been a cluster from the beginning, I should have just refunded the people the money when I realized it was going to be quite an ordeal working on this machine. However I offered to refund everyone numerous times, and everyone wanted to wait...i had a bad feeling about it though, and sure enough..go a few days without looking through email, and get two charge-backs. Then as I exchange emails with these folks, they don't bother to even tell me, until I ask. im not ...... at all, but I am not really interested in selling these to people who cause me any grief. I wouldn't sell one to the troll who made the above comment for 1,000$. but I have given several away...that speaks for itself. I build these right by my lonesome, and spend probably 6 hrs a piece with my hands on every one even with the cnc machine. I am no thief or con, I hate em. if I were, I would have collected thousands of dollars and been long gone. i build these because I can, any craftsmen out there understands the satisfaction one gets from doing work most people could not. The same reason a machinist would build a miniature internal combustion engine...Also because I believe I am building one of if not the best all round mods out there, at 1/2 the price of what the others would charge. Ive seen many mods, and all but a few were unimpressive. And it is beyond me why people equate fine threads with quality...ill post in a few min , for suggestions and hopefully a constructive conversation. I Do not have my hopes up...
Hey big shooter running your mouth why haven't any mods been received yet? Your a clown maybe you shouldn't have taken on work and collected payment to pay for your new machines before knowing what the hell your doing first. And I wouldn't want one of your mods for $1000 because I'd never receive it anyways. I remember talking to you last November and I ordered what I wanted and you wanted payment from me then and I'm glad I never paid your scamming ... then because I'd still be out the money.
Blue Fox Vapor (Travis) has contacted and advised that all those who have had issues with their order can contact him directly in order to resolve the issues of any prepaid undelivered orders with an immediate refund:
bluefoxvapor @ gmail.com [pls rebuild spaces]
Pls email me as well to confirm resolution of issues.
misty @ e-cigarette-forum.com [pls rebuild spaces]
bluefoxvapor @ gmail.com [pls rebuild spaces]
Pls email me as well to confirm resolution of issues.
misty @ e-cigarette-forum.com [pls rebuild spaces]
- Status
Similar threads
