Turbocad's finally selling mods :)

[turbocad6]

the next one is a dyed and stabilized dna75 with an ebony wood faceplate. the faceplate is in a natural wood finish for a little contrast. this block was from islewoods and they do a great job with there stabilizing

this one by request is an up sliding door with a centered atty, meaning a 22mm atty would need to be removed to slide the door up

 

[turbocad6]

this next one is the problem child. it's from a larger stabilized block, but this stabilization turned out to be pretty crappy compared to most other stabilized woods I've worked with. stabilization is supposed to stabilize the wood by nature, but this stuff still shrinks and warps and cracks like some of the most problematic unstabilized woods I've ever worked with really, and it has fought me the whole way. t's a little hard to tell how good something is stabilized until you cut into it and start working it.

this one still needs a little work shown with 2 different faceplates for testing. the first matching wood faceplate with sterling silver trim accents winded up warping and cracking soon after it was cut out, not even sure if it' salvageable at this point, even though supposedly stabilized, this wood acts way more like a green unseasoned tropical soft wood with how much it warps and shrinks after it's cut. the other faceplate shown is black ultem

 

[Raynman]

I really dig the Cocobolo 75. You've done well by picking that one. The others look very good too. I salute you my friend.

 

[turbocad6]

and the last one. this last one is another "extra" that I built for no one in particular and it is available for sale here right now. it is a sister mod to the cocobolo dual 18650 I just posted as it was cut from the same block. this is a natural oil rubbed wax finish cocobolo with a black ultem faceplate with brass trim. it will have amber ultem buttons... it has a down sliding door in right handed configuration with a centered atty. the brass trim and ultem faceplate are both upgrades but I'm offering this mod here without any upcharge for these upgrades to the first person that claims it here.

these wood mods should all be assembled and finished in the next few days then I'll move on to finishing up a batch of ultem mods and start contacting those next in line with the next wood mods

 

[cheeseofvapes]

these are absolutely GORGEOUS!!!!!!!!!!!!!!!!!

 

[Adrian13]

How much for "the last one" ?

 

[BobC]

Simply gorgeous work Turbo, all of em are stunning

 

[rudy4653]

Ultimate Vape Porn !!!!!!

 

[turbocad6]

How much for "the last one" ?

that last wood dna75 is $440 and I'll throw in the shipping on that one too.

 

[cheeseofvapes]

hey turbo great price for this one of a kind creation! do you have dimensions and/or photos of mod next to something (like fruits?) for scale?

 

[BobC]

hey turbo great price for this one of a kind creation! do you have dimensions and/or photos of mod next to something (like fruits?) for scale?

Can you come and stand next to my Turbo mod? Then we can take a fruits & nuts comparison pic

 

[BobC]

Here you go, in the middle, next to GDibbis, VR and CC mods and Pekos

 

[Train2]

For comparison, here's a fruit

Dang, actually, that might be a seed...
Here's a fruit

 

[turbocad6]

it's smaller than a pineapple and shorter than a banana but taller than a blueberry and wider than a strawberry if that helps

 

[cheeseofvapes]

lol!! thanks turbo!! the brass-face and black-ultem-face versions are my favorites of the bunch! what atty do you have there?

 

[turbocad6]

that's a nuppin with an ultem cap

here's a pic next to a pretty small wood mech for size comparison. it's about as small as a wood squonker with a chip can be

 

[BobC]

Feelin much pain right now,

Why do I only has one o' dees

 

[cheeseofvapes]

thanks for all the great shots! it looks about 75-80mm x 60-65mm x 24-26mm ish to my best guess lol

the brass trim on that is pure class

 

[Tamer El-Meehy]

is the DNA 75 one a dual or single 18650?

 

[ghola1was]

Beautiful work!