Valley View Vapes - **Official Information and Chit Chat Thread**

[RayN]

True it doesn't show much difference..
Are you using the EPDM (black) to test or because you prefer over the clear?
I'm torn with next tank. I love the non screws a lot more then I thought but I'm sloppy as sheet and I'm ruining the grommets. Luckily i ordered spares a few months ago though. I'm also torn with the screw since I'm so .... about where it ends up on the mods.

A little of both really. It started out as a test when I realized it wasn't food grade. Not that it should really matter, I seriously doubt other tank makers are going to the trouble of using all food grade materials the way I do. (I'm sure they're using rubber o-rings etc.)
I wanted to make sure it didn't impart any flavor to the juice or break down from it and it doesn't. It's a little more sturdy and a little more receptive to beng glued (I use super glue which is food safe) than silicone is. The silicone seems to separate from the screw easier after being glued. So it won't last as long as the EPDM will.

Personally, I only use tanks with a side screw. That was why I designed the Sidewinder. The regular Pyrex with grommets can be a little challenging for many people. Hopefully I'll have the caps in stock by the time my regular Pyrex glass arrives. The regular tanks will have the same new glass as the Sidewinders.

 

[MrPicC]

Awesome thanks for that detailed response!
Yes I realized first hand that the glue didn't take to the silicone when I ripped it out on the first night.. My fault though not the glues.. Very nice you got blue twists also! Gimme enough time and my impulse will get the best of me..
Expect a pm from me later.. Have a question

 

[Vince Clortho]

Whoo hoo, a sidewinder, another polypro (love the little 3ml tanks, never have enough) and some atomizers heading my way. Thanks for the great stuff Ray!

 

[RPadTV]

Why hello there new tank!

 

[RayN]

Thank you! It'll ship in the morning.

Whoo hoo, a sidewinder, another polypro (love the little 3ml tanks, never have enough) and some atomizers heading my way. Thanks for the great stuff Ray!

 

[RayN]

I'm using it's twin today.

Why hello there new tank!

View attachment 145411

 

[Vince Clortho]

oh I like the blue grommets. Maybe it would be too much, but a blue drip tip could knock that out of the park.

 

[RayN]

The Blue/White swirl tip looks really good with the blue grommets.

oh I like the blue grommets. Maybe it would be too much, but a blue drip tip could knock that out of the park.

 

[MrPicC]

Whoo hoo, a sidewinder, another polypro (love the little 3ml tanks, never have enough) and some atomizers heading my way. Thanks for the great stuff Ray!

OOOH ME TOO! Cept I went with a poly 5ml instead of 3.

Ray ever think of getting some ming drips? It's the one thing I want with every single tank I have from you.

 

[DreamingButterfly81]

oh I like the blue grommets. Maybe it would be too much, but a blue drip tip could knock that out of the park.

I love the blue too! I don't think its too much I think it looks great lol

Plus one for the recommendation for ming tips!

 

[RayN]

They're something I've been looking at lately. I'll probably pick some up eventually but I have so many other projects I need to spend the money on too. I have a hard time deciding what comes next a lot of the time.

OOOH ME TOO! Cept I went with a poly 5ml instead of 3.

Ray ever think of getting some ming drips? It's the one thing I want with every single tank I have from you.

 

[Vince Clortho]

I love the blue too! I don't think its too much I think it looks great lol

Nice looks, great pic

 

[glassmanoak]

Hey Ray!
I bought the large triple VVV tanks in Pyrex about 2 months ago. Will the Black Aluminum endcaps luisted on the website now fit them? Just getting my first of the month order ready.
Thanks

 

[RayN]

Hi glass,
Yes, they will. The ones listed as for "OLD" style pyrex tanks (with the ground edges) will fit those.

 

[RayN]

Once again, I am price matching a sale I found.

The eGo Twist 1100 mAh batteries are on sale for $19.99. Get 'em while they last!


eGo Twist $19.99

​

 

[RayN]

Ok, I placed an order for some in assorted colors!! Should have them late next week.

They're something I've been looking at lately. I'll probably pick some up eventually but I have so many other projects I need to spend the money on too. I have a hard time deciding what comes next a lot of the time.

 

[MrPicC]

Ok, I placed an order for some in assorted colors!! Should have them late next week.

Awesome! Just got one in yellow. It works with ur blue polypro and green sb. Looks like a toy!

 

[RayN]

I decided to not just put the Twist on Sale, but all my eGo Products!!

eGo Twist Starter Kits Regular Price $49.99 on Sale for 15% off!



Also save 15% on Chargers and Cases!​

 

[scoopbb]

doh, just ordered a case a few days ago from you. oh well, price was low anyway.

cant wait for the metal grommets for the sidewinder!

 

[Vince Clortho]

I decided to not just put the Twist on Sale, but all my eGo Products!!

eGo Twist Starter Kits Regular Price $49.99 on Sale for 15% off!

View attachment 146085

Also save 15% on Chargers and Cases!​

Whoah, nice. To anyone looking to buy a kit, this is one heck of a deal. RayN has to be barely breaking even on this one. And remember, it comes with a 3ml polypro tank.