Dunkin, Vmax and the best part being sidewinder. This doesn't leave rhe house usually do to my breaking everything.
HHAAPPPPY SATURDAY!!
Sent from the future... Left in the past..
Change the V to a Z and it would be better =p
Valley View Vapes - **Official Information and Chit Chat Thread**
- Thread starter RayN
- Start date
- th_trl_thread_readers 0
- Status
Change the V to a Z and it would be better =p
Nice! Looks pretty damn good actually! Being I won't get an extender it'll be even smaller with a 4ml tank
I must not fear, fear is the mind killer.
I must not fear, fear is the mind killer.
It's probably going to be some time before they're ready.
The dimensions of it are slightly different, I'll need to have more caps made and they may or may not work with the grommets I have. So, I really don't have any idea of an ETA for selling them yet.
The dimensions of it are slightly different, I'll need to have more caps made and they may or may not work with the grommets I have. So, I really don't have any idea of an ETA for selling them yet.
Hey Ray!
Three questions -
1) The aluminum caps are really just for the not-yet-available Premium Tanks?
2) If I wanted extra grommets for my PolyPro Jumbo tank, they'll be different than those I got for my 4ml Pyrex tanks?
3) Are there any discount codes available? Or sale codes? (Not that your prices aren't entirely reasonable - I just thought I'd ask...)
Thanks Ray!
I'm going to be posting some pics in a sec that I think will help some of the newer people with their questions about size and material and such...
Three questions -
1) The aluminum caps are really just for the not-yet-available Premium Tanks?
2) If I wanted extra grommets for my PolyPro Jumbo tank, they'll be different than those I got for my 4ml Pyrex tanks?
3) Are there any discount codes available? Or sale codes? (Not that your prices aren't entirely reasonable - I just thought I'd ask...)
Thanks Ray!
I'm going to be posting some pics in a sec that I think will help some of the newer people with their questions about size and material and such...
Here goes -
I've noticed that several people have had questions about VVV tanks.
Specifically, the Pyrex vs. the PolyPro and the different sizes.
I have a 4ml Pyrex (both the frosted and the clear) and a 5ml PolyPro with a side screw.
I've taken pictures of them both on my VV Gripper and then side by side so you will be able to compare.
Ray's card is in the picture for size comparison. His card is a standard business card size.
This is the 5ml PolyPro Tank - the Triple V Jumbo (I got a pink screw, but different screw colors are available)
Also note, that while the PolyPro Tank is not clear, it is translucent - you certainly will be able to see liquid level.
View attachment 141775
This is the 4ml Triple V Economy Pyrex Tank on the same set up.
View attachment 141776
Here are the 4ml Pyrex Tank and the 5ml PolyPro side by side - you can see they are essentially the same size.
The PolyPro may be a tad wider.
View attachment 141777
Here both tanks are from above - you can see the thickness of the tanks.
The Pyrex is a touch thicker.
View attachment 141778
Also just to note.
I compared the tanks to a standard 1.6ml CE4 (Stardust). With driptip on both, the tanks were a good 1/4 inch shorter than the CE4 on a mod. Personally, I carry my PV in my pocket and height can be an issue for me. So the tank give me more liquid availability and less height - that's a win in my book!!!
Hope the pics are helpful to everyone!
I've noticed that several people have had questions about VVV tanks.
Specifically, the Pyrex vs. the PolyPro and the different sizes.
I have a 4ml Pyrex (both the frosted and the clear) and a 5ml PolyPro with a side screw.
I've taken pictures of them both on my VV Gripper and then side by side so you will be able to compare.
Ray's card is in the picture for size comparison. His card is a standard business card size.
This is the 5ml PolyPro Tank - the Triple V Jumbo (I got a pink screw, but different screw colors are available)
Also note, that while the PolyPro Tank is not clear, it is translucent - you certainly will be able to see liquid level.
View attachment 141775
This is the 4ml Triple V Economy Pyrex Tank on the same set up.
View attachment 141776
Here are the 4ml Pyrex Tank and the 5ml PolyPro side by side - you can see they are essentially the same size.
The PolyPro may be a tad wider.
View attachment 141777
Here both tanks are from above - you can see the thickness of the tanks.
The Pyrex is a touch thicker.
View attachment 141778
Also just to note.
I compared the tanks to a standard 1.6ml CE4 (Stardust). With driptip on both, the tanks were a good 1/4 inch shorter than the CE4 on a mod. Personally, I carry my PV in my pocket and height can be an issue for me. So the tank give me more liquid availability and less height - that's a win in my book!!!
Hope the pics are helpful to everyone!
Awesome pictures above!
Heres a seasonal shot to add to the frosted.
I must not fear, fear is the mind killer.
Heres a seasonal shot to add to the frosted.
I must not fear, fear is the mind killer.
Awesome pictures above!
Heres a seasonal shot to add to the frosted.
I must not fear, fear is the mind killer.
Great pic! Great tank!
Hi Lettuce,
1) The aluminum caps will fit the economy pyrex just fine. It's just that the glass used in those isn't always perfectly straight, so the caps may actually highlight inconsistencies in the galss. They'll work perfectly though.
2) The grommets for the Jumbo tanks are a different size than the pyrex ones, so they're not interchangeable.
3) I don't believe in making people hunt for coupons. When I run a sale everyone gets the deal.
1) The aluminum caps will fit the economy pyrex just fine. It's just that the glass used in those isn't always perfectly straight, so the caps may actually highlight inconsistencies in the galss. They'll work perfectly though.
2) The grommets for the Jumbo tanks are a different size than the pyrex ones, so they're not interchangeable.
3) I don't believe in making people hunt for coupons. When I run a sale everyone gets the deal.
Regarding coupons. With the rewards program at Valley View Vapes, you get $10 back (in the form of a "gift certificate" that you can apply to future orders) for every $100 you spend. So it's like getting 10% off all the time. I've cashed in my rewards points twice now. I just hope Ray can afford to keep that going, haha.
Thats sad! I'm gonna need to order another asap
I must not fear, fear is the mind killer.
The cost to get them sandblasted was about $5 if I remember right, but they weren't selling at regular price.
This batch was among the first Pyrex tanks I bought, they just weren't selling.
Shucks that's too bad. gogoplata's video sold me on one. His comment about how they looked like an ice cube resonated with me.
I don't know, maybe I'll look into it with my new supplier and see what they'll charge me per piece.
But having a bunch of tanks sitting around that don't sell sure doesn't do me any good, nor does selling them below cost.
But having a bunch of tanks sitting around that don't sell sure doesn't do me any good, nor does selling them below cost.
- Status
Similar threads
- Locked
- Locked
