Vamo V3 coming soon, battery suggestions?

[roffles18963]

I just got my eVic yesterday and some Panasonic NCR18650B (the green 3400mAh ones) with a Nitecore i2 charger, and I'm planning on picking up a Vamo V3 within the next month. From what I've gathered lurking through the Vamo forums is that they generally perform better with stacked 18350s, so I was wondering exactly which ones I should get.

 

[xbassman]

For 18350s your only good choices are AW and Efest.
The AW will cost you a bit more, but is the better of the 2.

I wouldn't use that Panasonic if you run high wattage.

 

[roffles18963]

The Panasonic works well with the eVic at 10 watts up until about 50% battery (3.7V) when it starts shooting under load, which is why I always cycle the three batteries between it (or rather, I've only change the battery once since yesterday XD), and I have no interest in running 18650 with the Vamo when I get it. AW it is for the 18350!

 

[xbassman]

The AWs have been in short supply. Many vendors have been out of stock the last few weeks.

Here are 2 good vendors that have them:

AW IMR 18350 Li-Ion Battery (3.7v - 700mAh)
AW Orange IMR 18350 3.7v 700 mAh LiMN rechargeable battery

 

[roffles18963]

Thanks for the replies guys. Gonna hold off until next paycheck to pick these up, splurged a lot on some 18650s to mess around with and 100ft of 32g kanthal and about 30 feet of silica wick, some stainless steel mesh, to start rebuilding my own Vivi Nova and evod heads before I take the leap into RBAs. This month's vape expenses were a bit more than I had originally anticipated. Whoops. XD