Vaping without an RDA?
- Thread starter Raymundo Domango
- Start date
- th_trl_thread_readers 0
- Status
Hi Ray,
Please post what devices you are using and the details of the coils you made. (dia, wire type, resistance).
Example of coils in tanks:
GP Spheroid V4/GG Tilemahos V1/V2+
Cheers
I
Please post what devices you are using and the details of the coils you made. (dia, wire type, resistance).
Example of coils in tanks:
GP Spheroid V4/GG Tilemahos V1/V2+
Cheers
I
Last edited:
Top is the Spheroid V4 from GP and below is the Tilemahos from Golden Greek. (V1 or V2+)
Both, IMO, exceptional MTL/relaxed DL flavour chuckers.
I have one spheroid V4 (and an old V2) and three Tilemahos. (V1/V2+/Spring-o-mizer)
Golden Greek Tilemahos wins, however both are rock solid reliable.
Not really, no. I mean, technically you could just press the ends of the wires up against the ends of the battery and technically it would probably "work," but it'd be a really bad idea. Probably just best to wait until you can get your RDA.
What are you using, in the meantime? What kind of battery device, what kind of tank(s) do you have? What kind of coils did you build? Have your ordered the RDA yet? What kind is it/or what kind do you want?
I've got a handful of RDA's, my favorites are both clones (actually they're all clones): a Derringer from FastTech, and a Velocity Mini clone made by Tobecco. They're not really all that similar but, oddly enough, I put the same coils in both of them: dual 6-wrap contact coil 26g Kanthal on a 3mm diameter, comes out about .4-.42 on my ohm meters.
I use them sometimes, to "fog up the room" (not that much though really, haha) when my hands aren't too busy to drip all the time and I'm by my self so there's no one to bother with my clouds, but usually you'll find me puffin' away on one of my Kayfuns. They're tanks, but they're still rebuildable like an RDA. On those I make a smaller, single coil out of thinner wire: 28g Kanthal 8-10 wraps on a 2.5mm diameter, reads around 1.3-1.5 ohms, and gives a much less obnoxious cloud when I'm out in public or sharing a room with other people.
Odd question, as coils are coils, unless you can't fit it on a deck, they are fairly universal and could be rewrapped to fit.
If you're using a tank with cartridge coils, then you can't do much unless it's a type that can be taken apart and rebuilt.
Last edited:
you can use pretty much any coil in an RTA so i don't get the question really
but no you can't vape with coils that aren't inside an atomizer
but no you can't vape with coils that aren't inside an atomizer
Oh sorry to explain it better I only have a box and tank right now, but I have no coils left that will work with the tank.
The coils I have came with my tank I bought and I had to wick them...I'm not really sure what it is called...would that be an RTA? It has 2 screws and 2 coils but u have to wick it urself and then I can put it on my box but I don't know how since I cant use a tank with it.
These are the coils I use with tank
This are the coils I have now that cant use with tank
The coils I have came with my tank I bought and I had to wick them...I'm not really sure what it is called...would that be an RTA? It has 2 screws and 2 coils but u have to wick it urself and then I can put it on my box but I don't know how since I cant use a tank with it.
These are the coils I use with tank
This are the coils I have now that cant use with tank
why can't you use the RBA deck? (which is the coils you need to wick, it's called an RBA deck)Oh sorry to explain it better I only have a box and tank right now, but I have no coils left that will work with the tank.
The coils I have came with my tank I bought and I had to wick them...I'm not really sure what it is called...would that be an RTA? It has 2 screws and 2 coils but u have to wick it urself and then I can put it on my box but I don't know how since I cant use a tank with it.
These are the coils I use with tank
This are the coils I have now that cant use with tank
- Status
Similar threads
- Locked
