Vaporshark DNA200

Status
Not open for further replies.

KTMRider

Vaping Master
ECF Veteran
Verified Member
Jul 5, 2014
4,538
18,079
NJ
Quick question I will ask here and on the dna 200 thread. I've had the vs200 vt200 and the reuleaux. The vs200 has been saying check atty all of a sudden then I plug it into escribe and then it works. Then a hour later the same deal. I've tried 10 rdas that work on all of my other devices and unless I plug it in they won't work. After I plug it in and unplug the device it will work for a short time then it keeps repeating. I've had the worst luck with these dna 200's and I baby them all, never dropped any of them and no juice or liquid overflow at all. I also am very careful with the 510 so it's not like I went crazy tightening it down. If anyone has any advice that would be awesome thanks. To me sounds like a crappy solder joint but I don't do electrical things I just build houses. Lol
Sounds like it might be a problem with the 510. I'd contact VS and let them fix it. It took them less than a week (door to door) for them to fix my fire button.
 
  • Like
Reactions: Rockwell222

Rockwell222

Super Member
Sep 21, 2015
468
423
36
Sounds like it might be a problem with the 510. I'd contact VS and let them fix it. It took them less than a week (door to door) for them to fix my fire button.
That's what I'm thinking I may have to do. On the DNA 200 thread someone said the 510 insulator may have gotten pushed down if I used a atomizer with a longer 510 which I was using a Aeolus so that would make sense. I hope when I get home from work I can fix it but if not then away it goes for a week or so. Thanks for the advice
 

coilburner

Account closed on request
ECF Veteran
Jul 3, 2015
756
390
I have a question about the battery in the vaporshark. From what I gather its a 1300 mAh lipo or at least close enough. How long does the battery last at say 40 watts? I have a evic vt which has a 5000 mAh battery and at 40 watts my battery wont even last 25 minutes of continuous vaping, or all day.
All these dna200 mods that have built in lipos are around 1000 mAh and I cant imagine the battery would last long at all.
 

Tpat591

Ultra Member
ECF Veteran
Verified Member
Jul 28, 2014
2,728
9,711
RB nj
I have a question about the battery in the vaporshark. From what I gather its a 1300 mAh lipo or at least close enough. How long does the battery last at say 40 watts? I have a evic vt which has a 5000 mAh battery and at 40 watts my battery wont even last 25 minutes of continuous vaping, or all day.
All these dna200 mods that have built in lipos are around 1000 mAh and I cant imagine the battery would last long at all.
Deleted
 
Last edited:

Rockwell222

Super Member
Sep 21, 2015
468
423
36
I have a question about the battery in the vaporshark. From what I gather its a 1300 mAh lipo or at least close enough. How long does the battery last at say 40 watts? I have a evic vt which has a 5000 mAh battery and at 40 watts my battery wont even last 25 minutes of continuous vaping, or all day.
All these dna200 mods that have built in lipos are around 1000 mAh and I cant imagine the battery would last long at all.
The vaporshark is a 900mah lipo not 1300mah. And that question is difficult to answer, lots of variables. If your killing the evic VT battery in 25mins the vaporshark wouldn't last as much. I find it hard to believe of someone killing that much battery at 40 watts in 25mins but stranger things have happened.
 

coilburner

Account closed on request
ECF Veteran
Jul 3, 2015
756
390
The vaporshark is a 900mah lipo not 1300mah. And that question is difficult to answer, lots of variables. If your killing the evic VT battery in 25mins the vaporshark wouldn't last as much. I find it hard to believe of someone killing that much battery at 40 watts in 25mins but stranger things have happened.
You do realize I said 25 min of continuous vaping right? As in the fire but being held down for a total of 25 min.
 

KTMRider

Vaping Master
ECF Veteran
Verified Member
Jul 5, 2014
4,538
18,079
NJ
The VS DNA200 has a 950mah 3S battery which has an energy equivalent of 2850mah or 10.5wh.

I think you might have a bad battery in your Evic VT if can't last all day of vaping at 40w. Is that in TP? I have a Hana V200 too and both can last all day of vaping at 25w, 450°F or about 5-7ml of juice in a KFv4. I've vaped at 40w with a dripper all day on my DNA200's not in TP.
 
  • Like
Reactions: Tpat591

AtmizrOpin

Ultra Member
ECF Veteran
Verified Member
May 18, 2015
1,390
1,453
Pennsylvania
The VS DNA200 has a 950mah 3S battery which has an energy equivalent of 2850mah or 10.5wh.

I think you might have a bad battery in your Evic VT if can't last all day of vaping at 40w. Is that in TP? I have a Hana V200 too and both can last all day of vaping at 25w, 450°F or about 5-7ml of juice in a KFv4. I've vaped at 40w with a dripper all day on my DNA200's not in TP.
i thought the vs used the fullymax 900 mah? they upped it 50 mah?
 

KTMRider

Vaping Master
ECF Veteran
Verified Member
Jul 5, 2014
4,538
18,079
NJ
i thought the vs used the fullymax 900 mah? they upped it 50 mah?
Ack! You're right! I just opened my DNA200 and it's a Fullymax 900mah 3s. They're the same size as my 950mah batteries. I think it's just the ratings each company gives the pack. 900-950 are all pretty much the same. That's my story and I'm sticking to it :p
 

coilburner

Account closed on request
ECF Veteran
Jul 3, 2015
756
390
The VS DNA200 has a 950mah 3S battery which has an energy equivalent of 2850mah or 10.5wh.

I think you might have a bad battery in your Evic VT if can't last all day of vaping at 40w. Is that in TP? I have a Hana V200 too and both can last all day of vaping at 25w, 450°F or about 5-7ml of juice in a KFv4. I've vaped at 40w with a dripper all day on my DNA200's not in TP.
It was like that since the day I bought it, also its not even that old. Maybe 2 months old.

So is that why they would last longer or as long as my evic VT with a 5000 mAh battery. Is the evic VT battery 3.7v?
Anybody got an answer to that first question. It was in response to tpat591 saying "Sorry, the packs the DNA200 use are 3S meaning 3 cell in series. They operate at 11.1v not 3.7v."
 
Status
Not open for further replies.

Users who are viewing this thread