RDA VECTOR RDA™ by VLS

Status
Not open for further replies.

Uncletattoowhat

Ultra Member
ECF Veteran
Verified Member
Apr 21, 2014
1,116
1,294
Poquoson, VA
Update after a few days of using it. I am VERY surprised on how hot the tip/cap does NOT get while running a hot build like I am currently using. Still trying to find the sweet spot for my preferred vape as far as airflow cutoff and wattage, but I am enjoying it so far.
 

KY_Rob

Ultra Member
ECF Veteran
Verified Member
Feb 23, 2013
1,772
3,693
Kentucky
Finally made it home and got around to building the Vector. Been vaping on it for about an hour, and I'm completely satisfied. Fantastic dripper!

I did pop the screen out first thing, and so far haven't had a single spit-back issue. Running .50ohm dually's @ 30w, and it's chuckin vapor AND flavor like crazy!

Thanks again for the recommendations! Spot on, every one of them!
 

Afcarmona

Senior Member
ECF Veteran
Verified Member
Jun 18, 2014
242
302
Las Vegas NV USA
I've had this for a week now - and like everyone else - removed the spit back screen - no issues. No issues with the drip tip getting hot... well maybe its gets warm, but that goes the same for most of my mods drip tips. Build is same as above - dual coil @.5ish ohms @34 watts - love this rda! fit and finish is excellent. Ever since I saw this at the Vape Summit I have been planning to purchase this. I finally picked it up on a flash sale at a local b&m(shout out to the guys @Vape Street LV) - can't beat $40 dollars for an authentic. Did I say i love this rda? And the packaging and presentation... I can go on...
 
I've had this for a week now - and like everyone else - removed the spit back screen - no issues. No issues with the drip tip getting hot... well maybe its gets warm, but that goes the same for most of my mods drip tips. Build is same as above - dual coil @.5ish ohms @34 watts - love this rda! fit and finish is excellent. Ever since I saw this at the Vape Summit I have been planning to purchase this. I finally picked it up on a flash sale at a local b&m(shout out to the guys @Vape Street LV) - can't beat $40 dollars for an authentic. Did I say i love this rda? And the packaging and presentation... I can go on...


just got the same sale online =-) i love vape-street, they're great guys. I;ve ordered from them a few times now, even talked to them on the phone once!
 
  • Like
Reactions: Mr.Mann

Afcarmona

Senior Member
ECF Veteran
Verified Member
Jun 18, 2014
242
302
Las Vegas NV USA
just got the same sale online =-) i love vape-street, they're great guys. I;ve ordered from them a few times now, even talked to them on the phone once!
I'm lucky that I live across town from them - there are a few vape shops between me and them - but my first choice would be vapestreetLV - they are always welcoming and happy to give build tips and juice suggestions.

peace and be well

tonyc
 

Afcarmona

Senior Member
ECF Veteran
Verified Member
Jun 18, 2014
242
302
Las Vegas NV USA
Only until you try The Velocity RDA...

LOLz, Jim

that's another RDA I've had my eyes on... but vape budget is kinda not there atmo... got a ranger box mod on the way... anyways back to the vector... they are coming out with new finishes - looks like a black one and a gold one...

peace and be well...

tonyc

btw its(the vector) on sale for $33 @ csvape gosh darn it - sale was over on 6/30 12pm pst :(
 
  • Like
Reactions: sahsah

WharfRat1976

Vaping Master
ECF Veteran
Verified Member
May 31, 2014
4,731
5,981
Austin, Texas
that's another RDA I've had my eyes on... but vape budget is kinda not there atmo... got a ranger box mod on the way... anyways back to the vector... they are coming out with new finishes - looks like a black one and a gold one...

peace and be well...

tonyc

btw its(the vector) on sale for $33 @ csvape gosh darn it - sale was over on 6/30 12pm pst :(
Dang missed that one....$55 it is...
 

Uncletattoowhat

Ultra Member
ECF Veteran
Verified Member
Apr 21, 2014
1,116
1,294
Poquoson, VA
For $33? OMG! I think this is hands down the best RDA for the price. And to think some would still buy a knock-off to save $10-13. Crazy.
My thoughts exactly. I bought two for $40 each (one online and shipping was delayed and my impatience led me to buy an authentic used locally). At that price, this is one of those "if I could justify it" moments where I am considering buying one to two more to have on hand or give to a fellow vaper as a PIF gift.

This atty is tied in first in my rotation with my Aeolus clone. My only complaint so far is that its a 3 post design, not a 2 post, which would make my life easier when installing my fused claptons lol.
 
  • Like
Reactions: sahsah

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
48
All over the place
My thoughts exactly. I bought two for $40 each (one online and shipping was delayed and my impatience led me to buy an authentic used locally). At that price, this is one of those "if I could justify it" moments where I am considering buying one to two more to have on hand or give to a fellow vaper as a PIF gift.

This atty is tied in first in my rotation with my Aeolus clone. My only complaint so far is that its a 3 post design, not a 2 post, which would make my life easier when installing my fused claptons lol.


Agreed. I am about ready to boycott all three-post designs (after my Aeolus mini comes in). LOL. But even still, THIS atty at the price is and should be considered the best quality atty for under $50 (IMO). Hell, it's better quality than a lot of atties that are >$100!
 
Last edited:

Uncletattoowhat

Ultra Member
ECF Veteran
Verified Member
Apr 21, 2014
1,116
1,294
Poquoson, VA
Agreed. I am about ready to boycott all three-post designs (after my Aeolus min comes in). LOL. But even still, THIS atty at the price is and should be considered the best quality atty for under $50 (IMO). Hell, it's better quality than a lot of atties that are >$100!
I can honestly say this Atty was my first Authentic. At the price point, I would buy EVERY atty authentic if they were as solid and great in quality as the Vector.

I've had my eye on the Haus of Zombi (Hyun USA) Pi2 postless atty for what feels like weeks. It's going to suck seeing the sticker shock when it drops online this weekend. I have a feeling its going to be a 3 digit pricetag. But, if it is, it may be the first time I've spent 3 digits on ANY vape gear. I. MUST. HAVE. IT.
 

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
48
All over the place
I can honestly say this Atty was my first Authentic. At the price point, I would buy EVERY atty authentic if they were as solid and great in quality as the Vector.

I've had my eye on the Haus of Zombi (Hyun USA) Pi2 postless atty for what feels like weeks. It's going to suck seeing the sticker shock when it drops online this weekend. I have a feeling its going to be a 3 digit pricetag. But, if it is, it may be the first time I've spent 3 digits on ANY vape gear. I. MUST. HAVE. IT.


Logging it in now. Ping me when it drops.
 
Only until you try The Velocity RDA...

LOLz, Jim


I love love love the idea of the Velocity, and I do understand that it's supposed to be a "Competition RDA", but I've got a few qualms with it. For one it cannot support normal single coils, by normal I mean in front of the posts and not between them. Also I dislike that it doesn't technically have a top cap to drip more easily, and you have to pull off the entire chamber every time to re-drip. I also really don't like dripping through the drip-tip, nor taking it off to drip. I love all the airflow options, and the build deck, I just can't justify that price tag when it doesn't have all of the features in an RDA that I look for. And yes I do realize the Vector does not support single coils either, but I just had to have it for $40 lol.
 
Status
Not open for further replies.

Users who are viewing this thread