Vision Mini Deux

[richham3]

I'm a big fan of the Vision Deux, been using them almost exclusively since GV started stocking them, and just received some minis. The mini actually seems to be the perfect size for me and I wanted to know if you will continue to stock them and if by chance you will also carry replacement tubes like you do for the 3.5ml size? The Vision Deux and Mini Deux are the cleanest vape I've ever had and I highly recommend both.

 

[badkolo]

the vision is full throttle at gotvapes, just keep watchin, ill know more info on tube sizes later on and I agree its the cleanest vape there is

 

[MJBinNM]

the vision is full throttle at gotvapes, just keep watchin, ill know more info on tube sizes later on and I agree its the cleanest vape there is

I been using the visions for just over a week now and really like them. I've noticed that the wick stays a lot cleaner than the CE2 wicks (doesn't seem to stain as much)...it must be a slightly different material. This may be why they seem to have a slightly cleaner taste.

I really like them, but there are a couple things I'd like to see. I'd like to have the option to get them in a lower resistance, like a 2.4 to 2.6 range. I'd also like to see them with a KR808 connection. It would also be nice to get different color or style tips (I usually use the tips to identify my juice flavor. I also prefer the round tips over the whistle tips)

 

[ZebadeeDoodah]

To each his or her own. I really like whistle tips. The first change I'd like to see would be stronger, more flexible tubing.

 

[cosprings]

I just spent the past week with my first Vision and wow! It has the best draw, the best flavor and the longest lasting carto so far. The new CE2s had that title until I tried the Vision. I can vape on a CE2x for a day or so until it gets weird on me. I managed a day, maybe 2, before the Sapphire started having troubles.

Then again, I am probably a heavy user with little tolerance for variance. My wife will go for a week or three on the old (non-X) CE2 tubes before switching them out.

With the Vision Deux, I managed three full days before the wicking and the taste started having problems, and with some tilting and burning I was able to eek out a full week of vaping before I put it down.

I can probably figure out how to disassemble, clean and refurbish it, but I already have enough hobbies. Nicely done GV!!!!

 

[chingbo]

I also really like my Vision Deux, but I need to pick up some mini's make more please!! =)

I need something small & efficient for when I snowboard

Whistle tip on it is nice, never get any spitting juice, draw is nice and clean. great product GV!

 

[arjay55]

Aaaaaarghh!! Where is that darn delivery guy with my parcel?? Can't wait to try the Mini. The 3.5ml is great but just too big for me. Nope . . . still not here. It's only 10,000 miles, how long can it possibly take?

 

[jteezy]

I really like these too. The only problem I'm having with these is with the threads. I think its because of the slits on the sides of the connector, if I tighten my vision up enough so that it doesn't wiggle around it pops loose. Is there anybody else having this problem? I'd like to see these with the same threads and unbreakable tubing like the new ce2's, and they would be perfect in my opinion.

 

[richham3]

Using the vision cone with the vision helps with the "wiggle".

I really like these too. The only problem I'm having with these is with the threads. I think its because of the slits on the sides of the connector, if I tighten my vision up enough so that it doesn't wiggle around it pops loose. Is there anybody else having this problem? I'd like to see these with the same threads and unbreakable tubing like the new ce2's, and they would be perfect in my opinion.

 

[jteezy]

That's a good idea. I've been using mine on my box mod and my saber touch. I'm gonna order a ego adapter and the vision cone. Thanks

 

[arjay55]

Aaaaaarghh!! Where is that darn delivery guy with my parcel?? Can't wait to try the Mini. The 3.5ml is great but just too big for me. Nope . . . still not here. It's only 10,000 miles, how long can it possibly take?

Are you allowed to quote yourself ? Ah well . . . too late.

Amazing what a bit of whining does. The delivery gods smiled upon me and delivered my goodies. Thanks delivery gods, and thanks Chris and Danno.

 

[ames001]

Are you allowed to quote yourself ? Ah well . . . too late.

Amazing what a bit of whining does. The delivery gods smiled upon me and delivered my goodies. Thanks delivery gods, and thanks Chris and Danno.

lucky ... i still dont have my ce2s or my vision and i'm HOPELESS with 510s (first day of using them was yesterday, 401s need too much dripping on an sb) i WANT my goodies - cries in a corner- i DO know that they were in new york on my birthday, so they might get here by friday. i'll just keep reading the teasing posts

 

[2jzpower]

The Vision is the best cartomizer / clearomizer that I've tried to date!!!
They taste sooo much cleaner than anything.
The Mini is the perfect size for carrying around all day. The regular size makes the setup a little too long.

Badkolo:

I work as a quality engineer and have some ideas.

Please keep the 3 chamber design on the whistle tips if the design changes.
The 3 chambers eliminates the juice condensation / juice in mouth issue far better than anything I've used.

The connection where the steel shaft meets the ceramic cup can pop off when removing the lower silicone gasket. Currently there is no O-ring there so if it does pop off it leads to gurgling.
Maybe an better connection or O-ring will help.

Also the clear plastic tends to crack so if possible the Fluxomizer tube material will make these top of the line.

 

[badkolo]

Keep Watching, amazing times ahead, real soon

 

[Tendril]

I really like these too. The only problem I'm having with these is with the threads. I think its because of the slits on the sides of the connector, if I tighten my vision up enough so that it doesn't wiggle around it pops loose. Is there anybody else having this problem? I'd like to see these with the same threads and unbreakable tubing like the new ce2's, and they would be perfect in my opinion.

My problem with both them and the CE-2 and standard style cartomizers is the slit base. Why can't they use a base like the Sapphire? It's very hard to use on a GLV2 because the center contact is just an offset post and the slits mean it can only make contact if it's screwed on correctly. Any atomizer or Sapphire with a normal base works fine. Also, because of the taper in the slits on the Vision and the offset connector on the GLV it forces the shaft to be cocked in the tube, meaning one side of the wick gets sandwiched between the seal and the tube. It still works great, but it's a PITA sometimes and I don't understand why the CE-2 and the Vision can't use a regular flat and continuous center connector like a JOYE atomizer

 

[monarch79]

Do you have the updated center pin on your GLV? I don't remember if you're a regular in that forum, so forgive me if you already know this...

Mine is the adjustable pin with the center "nipple" and it works freakin flawlessly. Something about the way he designed this, I have NEVER had any juice in my connector. Ever. Even with slushy Boge cartos... The adjustable pin is genius! If you don't have the new center pin, you can send yours in and he will switch it out for you (I think it's $15) but he's really busy right now pumping out GLV3s and moving to a new shop so I might wait a bit to send it in or it will take a while for him to get to it... It's totally worth it!



EDIT: Yup, I know I've seen you over there! You have no excuse... Get your center pin redone, you'll be glad you did!

 

[Tendril]

Thanks monarch!

 

[dannoman]

Out of curiosity how long does it usually take our packages to arrive their in australia?

Are you allowed to quote yourself ? Ah well . . . too late.

Amazing what a bit of whining does. The delivery gods smiled upon me and delivered my goodies. Thanks delivery gods, and thanks Chris and Danno.

 

[arjay55]

Out of curiosity how long does it usually take our packages to arrive their in australia?

Normally takes about 14 days (dependent on weekends of course). I try to pace myself, but I start to get a little edgy about 2 days after I get the delivery notification,

After 10 days I'm a basket case. 12 days everyone steers clear of me. No longer speak human, just growl at people.

The day it arrives, Gary, my postman, gets off his bike and hand delivers me the package. It's a happy day for him too. No more daily bruises when I tackle him off his motorbike and demand a package, heheh.

 

[gman1000]

Normally takes about 14 days (dependent on weekends of course). I try to pace myself, but I start to get a little edgy about 2 days after I get the delivery notification,

After 10 days I'm a basket case. 12 days everyone steers clear of me. No longer speak human, just growl at people.

The day it arrives, Gary, my postman, gets off his bike and hand delivers me the package. It's a happy day for him too. No more daily bruises when I tackle him off his motorbike and demand a package, heheh.

You have trained him well. Now go forth & strike fear into those other carriers around the world. I bow to your supreme mastery of the mailman.....MUHAHAHAHAHA!!!!