Yeah, fully charged. Got it on Monday afternoon. Is it a bad piece?
Vision SPINNERS BACK IN STOCK! All Colors, from 400mah to 1300mah AVAILABLE!
- Thread starter dannoman
- Start date
- th_trl_thread_readers 0
-
- Tags
- awesome vapor provari smoktek
- Status
Yeah, fully charged. Got it on Monday afternoon. Is it a bad piece?
Running about 9.5 watts. 1.7ohm x 4volts on average.
Actually, yesterday I got much longer use. So, now wondering why on Thursday and Friday got between 6-7 hours but yesterday closer to 10 hours.
Maybe just goes to use. I will continue to monitor and see what is going on.
I run much cooler at 4v and 2.5 ohm = 6.4W.
That would explain why I get much more vape time out of my 1300mah spinner.
The following can only be a general statement and will not apply to all make/models of batteries. The info is hard to verify for each type since battery chemistry is often considered secret proprietary information by their manufacturers.
Rechargeble Lithium batteries advantages are their storage density to weight ( how many MAH they hold ) as well as being able to provide high current ( amps ). Some of their disadvantages are that they can't retain a charge for a long period of time on the shelf and when they start to reach 3.0-3.3v or less volts, it is detrimental to the battery and reduces it's life expectancy.
Many are manufactured with a chemical stabilizer that extends it's storage charge shelf life for when it is in the warehouse or store shelves but it also limits the total how long a fully charged battery can last. After a few charge/discharge cycles ( usually between 3-5 ), this stabilizer is neutralized and then the battery can be used for its full charge MAH capacity.
Hopefully, this is what I am experiencing. I will know better tomorrow as I will be back to my work schedule. If it craps out at 1 or 2 o'clock, I will know it isn't improving.
Didn't use it much today so can't say. Yesterday, as I posted above seemed better, but I wasn't on the same schedule.
Well, here it is 1:45, Monday. Battery died about 15 minutes ago. So, the change on the weekend was schedule only, apparently. The conclusion is that I get about 6-7 hours on a full charge on 1300mah Spinner.
I sure don't feel like I am hitting it too hard so I assume either it is a bad unit or that is what you get.
I am debating ordering another one to see if it is better, and if it is great, if not then Okay.
I sure don't feel like I am hitting it too hard so I assume either it is a bad unit or that is what you get.
I am debating ordering another one to see if it is better, and if it is great, if not then Okay.
It's a good idea to have a few spare batterys anyhow.
I always take about 4 or 5 with me to work with extra cartos, juice and a syringe.
Its just a normal thing for me now.
I always take about 4 or 5 with me to work with extra cartos, juice and a syringe.
Its just a normal thing for me now.
No doubt. I had two 13650 mods, in addition but the switch just went out on one and the other is the gripper and I need an extension to run my atty, which I don't have. So I am using this with my atty and the gripper and some 510s with cartomizers, but it sucks compared to my atty.
Ok so I just got my 650man Spinner in the mail, and I must say I'm very impressed with it so far. Surprised how small it is, and it should be perfect for work, I'll just have to see how long the battery lasts me.
I've never used any of these mid range PV's before, I've only used Blu, V2, and then a Provari, but this thing has surprised me. Very easy to dial in the voltage, and to figure out what you set it at. Also I was worried about how they would stand up with a tank on them, but it doesn't seem to be an issue, even with a Splitfire.
I was also worried about the button, but now that I've used it I'm happy. It's nice and clicky (compared to my Provari), and while it feels weird trying to use my thumb, using my middle finger works perfect, and feels comfortable.
I guess if I have any issue its that my Splitfire tank wobbles on it, even with an Ego C collar on it. To fix that I unscrewed the collar until the tank was resting on it. Is there a way to shorten the pin length of the Splitfire?
My friend also got his 2 1300mah Spinners in today. I helped him get it setup on IM. After he took his first vape, he told me "<cough> this is way better than the V2 you let me borrow." So thank you GotVapes and community for letting me know about these.
So this is my first impression of these, and we'll see how it works out down the line, but so far I'm very impressed.
I've never used any of these mid range PV's before, I've only used Blu, V2, and then a Provari, but this thing has surprised me. Very easy to dial in the voltage, and to figure out what you set it at. Also I was worried about how they would stand up with a tank on them, but it doesn't seem to be an issue, even with a Splitfire.
I was also worried about the button, but now that I've used it I'm happy. It's nice and clicky (compared to my Provari), and while it feels weird trying to use my thumb, using my middle finger works perfect, and feels comfortable.
I guess if I have any issue its that my Splitfire tank wobbles on it, even with an Ego C collar on it. To fix that I unscrewed the collar until the tank was resting on it. Is there a way to shorten the pin length of the Splitfire?
My friend also got his 2 1300mah Spinners in today. I helped him get it setup on IM. After he took his first vape, he told me "<cough> this is way better than the V2 you let me borrow." So thank you GotVapes and community for letting me know about these.
So this is my first impression of these, and we'll see how it works out down the line, but so far I'm very impressed.
For the most part, I've been getting a whole day of heavy vaping out of my 1300 mAh Spinner. I do keep a spare PV on hand at all times just in case.
Yeah until I figure out if it will get me through a day of work, I'm going to take my provari in my backpack. hopefully I wont have to break it out since I'll just being using the Spinner in the car (20 min drive) and the usual lunch/smoke breaks. When I'm at home I chain vape and thats what my provari will be for 
I have a kit put together on gotvapes.com. Vision Spinner 1300mah FAT with a wide mouth cone and I'm ready to pull the trigger, but they are sold out of chargers... I'm probably the only person on the forum that doesn't have 5 Ego chargers laying around. I don't have a single one!!! They are also out of the small tank thread sleeve... man I don't want to have to pay shipping twice!
I'm probably the only person on the forum that doesn't have 5 Ego chargers laying around. I don't have a single one!!! They are also out of the small tank thread sleeve... man I don't want to have to pay shipping twice!
Last edited:
I have a kit put together on gotvapes.com. Vision Spinner 1300mah FAT with a wide mouth cone and I'm ready to pull the trigger, but they are sold out of chargers...
Have you thought about this one? It's really better to charge with a wall adapter than through your computer
Genuine Joyetech Complete Charging System- Wall Apapter & USB [gv-joyetecheGoCHARGERSystem] - $15.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
Have you thought about this one? It's really better to charge with a wall adapter than through your computer
Genuine Joyetech Complete Charging System- Wall Apapter & USB [gv-joyetecheGoCHARGERSystem] - $15.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
I did see that one. but I could buy the USB plug and the wall adapter for $12. I don't need a case... Plus, I have about 20 USB wall adapters laying around already.
Last edited:
That doesn't include the case ( or the eGo batteries that are also in the pic )... You'd asked about a possible solution and while you may not need all of the components... it does contain the one part you were asking about...
Thanks rdsok. That is very true! I guess I'm just old school in thinking that 2 pieces that can be bought separately for $6 each shouldn't cost more when bought in a package together. Screw it. These guys have been good to me in my very young vaping career. I'll bite the bullet this time.
The difference is one is a Joyetech product and the others are not... I'm not saying that one is better or worse than the other, but one is a name brand and the other is not...
I think I just got a weak battery in my spinner. I got a 650 passthrough and it seems to last on battery as long as the spinner. Granted it isn't vv, but I wasn't pushing the 1300 that hard.
- Status
Similar threads
- Locked
- Locked
