Vmod Noob

Status
Not open for further replies.

rebel_logan

Full Member
Verified Member
Apr 30, 2013
68
6
33
Tahlequah OKlahoma
well I got my black Vmod 2.0 yesterday and I am very impressed. there is definatly a learning curve to it but I think I am starting to get the hang of it. I experienced my first dry hit and wow that sucks and then I didn't squonk it right so I got about 6 dry hits before I actually got the liquid into the silo cartomizer. I have had a feed flooding issues due to the fact that im still learnin. my question is you should turn it tilting down to prime it and wait for the two bubbles then do you turn it right side up to push in on the bottle or do u leave it tilting down? I found that at a full bottle right side up seemed fine but at about half a bottle I had to push in on the bottle while tilting is this right? thanks
 

fourthrok

Vaping Master
ECF Veteran
Verified Member
Aug 12, 2012
3,192
7,709
Watertown, NY
I rarely tip the bottle all the way over and watch for the bubbles. Mostly only when a Vmod has been sitting for some time (overnight or longer). The thing is: the juice can drip back into the bottle from the catch chamber. I also tip all the way over when starting in with a newly washed and dried Vmod.

Generally, holding the Vmod horizonally and giving a light "tap" (not really a squeeze) will wet the cartomizer or atomizer enough. You'll hear a little "squirk" sound if it's feeding right. If you don't hear that...then hold the bottle upright and squeeze (lightly) to clear any air bubbles that might be blocking the feed.

There are lots of tips here http://www.e-cigarette-forum.com/fo...lling-all-vmodders-those-interested-vmod.html and here...this one is really long but there is a LOT of information there http://www.e-cigarette-forum.com/fo...0-bottom-feeding-mod-vapage-com-part-2-a.html

Welcome to the wonderful world of Vmodia!
 
Status
Not open for further replies.

Users who are viewing this thread