Voltage for Buzz Pro and I-Pro

[Madriz]

Hey guys,

Sorry for the noob question here what is the loaded voltage range for both of these PV's I have looked but cant seem to find an answer and I have seen Grim Greens review were his reached about 4.5 loaded is this correct or can you achieve 6 volts under load (Atty, Carto installed). Sorry if this has been asked before but really trying to decide on my next PV.

Thanks for the help ahead of time!

Madriz

 

[Ma'am]

Hi Madriz! Sorry, but I don't have the answer you're looking for. I don't know all the "techy" stuff regarding my Buzz Pro, I only know that I love it.......does that help?!?!

Just hang tight, Mike (Buzzkill) should be along shortly, he's great about answering any questions regarding his products.

 

[908Tracy]

Sorry Madriz, I'm right there with Ma'am on this one.

I leave all the mAh's and the volts and the ohms talk to the rest of the army, but I can tell ya that my Buzz Pro ROCKS my socks!!! =)

 

[Ruppy]

You cannot get 6v loaded out of either PV. The voltage range on mine is 3.4-5.6 unloaded. Loaded max is around 5volts.

 

[Madriz]

Thanks guys! The buzz pro has been calling my name for quite a while but I have gotten used to vaping at 6 volts on my prodigy which at the end of the day is probably not 6 volts loaded either.

Thanks again

Madriz

 

[Ruppy]

No its definitely not 6v loaded. I would say just over 5.2 volts after the first few hits.

 

[Madriz]

Thanks again so it seems that I can reach the vape I get out of my prodigy out of these!

Ruppy,

Which one do yuo have the Buzz Pro or the IPro?

Thanks

Madriz

 

[BuzzKill]

OK for 2ohms and above it is 3.3 5.5 volts for 1,5 ohms 3.3 0 4.7 volts , 15 watts max power there is some fudge factor in there about +/- .15 volts , best operation is a 2.8-3.0 ohm atty/carto this gives BEST battery life and vape area IMO .

 

[Ruppy]

I have a BPro a original infinity and two original Buzz

 

[BuzzKill]

I have a BPro a original infinity and two original Buzz

Is that original Infinity still working ??

 

[Ruppy]

Is that original Infinity still working ??

Yup still works great I dont use it alot these days. Ive loaned it out a few times and take it out when im in the workshop.

 

[Eddie.Willers]

Phil Busardo just did an Infinity video review where he ran loaded and unloaded voltage tests with a variety of cartos. IIRC, the Infinity topped out, using a Boge LR (2 ohm) at 5.2 volts or so under load.

 

[Madriz]

Thanks for all of the info it seems the hard part will be picking between the buzz Pro or the I Pro!

Sent from my Nexus S using Tapatalk

 

[BuzzKill]

Phil Busardo just did an Infinity video review where he ran loaded and unloaded voltage tests with a variety of cartos. IIRC, the Infinity topped out, using a Boge LR (2 ohm) at 5.2 volts or so under load.

His batts were low during that video ! I talked to him later and after a charge it went to 5.6 volt LOL ! just my luck really LOL