VV REOS Part II

[FeistyAlice]

It works quite well with 18650's and 18490's. It takes 2 spacers per battery for the 18490's so I'm guessing that it will take 3 spacers per battery with the 18350's. I have very little experience with any other chargers but I'm quite pleased with this one.

Edited to add that you can buy additional spacers for just 45 cents each as I recall.

I use two spacers in my WR-139. Don't need spacers in the WF-188. Cheapest way to go if you are doing 3.7 IMR, or protected (or unprotected Powerizers that NotCigs sells for the BP). If you have 3v LiFEPO4 then you should already have the appropriate charger. The only reason I have the 3v LiFEPO4 was for use in stacking unregulated. I use the 3v and the skinnier 16xxx batteries because I have them already. They work great but if buying new, for the VV REO, best to get the AW IMR 18xxxx.

Hugs, Feisty Alice

 

[unsure]

Getting back to the REO VV I got several request PMs for the wood supplier I get mine from and I use to provide that info but the supplier ask me not to anymore since he is now selling bulk stabilized wood blocks now and doesn't have the time for special orders....

. Besides Rob gets them and he makes them available when he can at a hassle and more of an expense to him.

As why I picked RED color was because of several reasons like its RED being made by Redeyedancer and cause Im ready for mine.

 

[whatitstrue]

Rob I just saw Lisa's New VV Woodvil. All I can say is WOW!!!! Simply breathtaking!!!! Just when I think I couldn't want one any more than I already do. A new photo or status update kicks my need for one into overdrive.





I'm pretty sure I'm getting a ulcer from the antisipation of these.

 

[redeyedancer]

Rob I just saw Lisa's New VV Woodvil. All I can say is WOW!!!! Simply breathtaking!!!! Just when I think I couldn't want one any more than I already do. A new photo or status update kicks my need for one into overdrive.





I'm pretty sure I'm getting a ulcer from the antisipation of these.

Its just not fair my friend lol .I should have them just about all sanded by the end of the day tomorrow.I am looking forward to this release of mods its going to be a good one

 

[washvap]

That's great news to hear!! Looking forward to the release of these mods too. Holding off buying a mod this month in anticipation of getting one for myself.

 

[pmoraldo]

Can't wait to see these woodys with finish on them

 

[WannaGetHealthy]

oh man.......finished sanding by the end of tomorrow. WOW we're close. I'm so nervous.....with my work schedule, there is no telling if I'll be working on release day! With the help of a friend(you know who you are, man, I owe you!), I managed to get my hands on a kick and it is real nice to "kick" the grand. It helped the itch, but did it even touch my desire for a VV woodvil......nope. I plan on buying one just as fast as I possibly can. LOL, sadly I don't know one single "gotta buy something right at launch" ninjas who aren't hoping to snipe their own woodvil. I'm crossing my fingers, 'cause I've been waiting for what seems like forever......I remember speculating whether the chip would be a booster or stacked config.......I REALLY HOPE I DON'T HAVE TO WORK LAUNCH NIGHT!

 

[kabonk]

you and me both if I new the release date I'd probably take PTO for the night

 

[unsure]

tick tock tick tock tick tock......

 

[davelog]

George, what are the dimensions on these blocks of stabilized wood that you post? It's so hard to get a sense of scale on them. Are they just big enough to make a single mod from?

 

[unsure]

George, what are the dimensions on these blocks of stabilized wood that you post? It's so hard to get a sense of scale on them. Are they just big enough to make a single mod from?

The very minimum for a regular Woodvil is....this is the size tho looks bigger.
2-3/8 wide by 4-1/4 long by 1-3/8 thick. I'd go bigger and give Rob more breathing room imo cause of a accident he just can't go to the inventory stock or scrap pile and replace a piece also the bigger the cost goes up!

 

[Della Cirque]

I should have them just about all sanded by the end of the day tomorrow.

 

[davelog]

The very minimum for a regular Woodvil is....this is the size tho looks bigger.
2-3/8 wide by 4-1/4 long by 1-3/8 thick. I'd go bigger and give Rob more breathing room imo cause of a accident he just can't go to the inventory stock or scrap pile and replace a piece also the bigger the cost goes up!

Outstanding, that picture gives me the scale that I've been missing all this time.

For my own (non-Tesla) wants, I'm looking for a dark, strong wood like ebony with a door that contrasts the body. I really liked the look of Delilah's ebony/stabilized, that's pretty much what I'm shooting for... although some of the all-darks I saw coming out of this batch will do nicely.

 

[irukandji9111]

Now that we are getting so close to a release, I am moving around some funds in order to hopefully pick one of these bad boys up when they become available. I apologize in advance if this has been asked already, but do we have any round about figure for how much one of the devices will set us back? $175-$200? I was hoping someone might have some insight....Thanks

 

[unsure]

Now that we are getting so close to a release, I am moving around some funds in order to hopefully pick one of these bad boys up when they become available. I apologize in advance if this has been asked already, but do we have any round about figure for how much one of the devices will set us back? $175-$200? I was hoping someone might have some insight....Thanks

Understandable you'd ask but no one knows and Rob is probably still determining the price otherwise he would lets us know. You can be sure at whatever price it will be he will make it the best price he can and it'll be worth every penny.

 

[house mouse]

tick tock tick tock tick tock......

I know. I check this thread at least 5x daily to see if there's any news. I got myself way excited too when I came here now until I realized that the thread "Stock Update!" belonged to the supplier forum right below this one.

 

[unsure]

I know. I check this thread at least 5x daily to see if there's any news. I got myself way excited too when I came here now until I realized that the thread "Stock Update!" belonged to the supplier forum right below this one.

Feelings shared by most but Rob is doing his best and quality is upmost of importance when it comes to REOs. I just like to clown around and

 

[davelog]

If Orson Welles was still around, he'd say...

"Rob will sell no mods... before its time."

 

[DarbukaDave]

The anticipation builds! Getting excited

 

[Skeeter T]

I was wondering about the VV voltage wheel. Those in the REO VV beta test or those with a BP, have you ever put a voltmeter on them and figured out the variation in voltage you can accurately adjust to i.e. .1, .2 or .3 volts? In other words, how sensitive is the wheel? Is the wheel infinitely variable or does it have a click when turned?