VVproV now ON SALE !!

[ukeman]

http://www.e-cigarette-forum.com/forum/notcigs/203486-vvpv-test-results-comments-5.html#post4497389

try that link; it's my review of the last beta; closest to what is coming out. I was lucky to get the final beta after the first two (plastic classics) went through the wars.
I did put some specs there.

 

[doots]

Thanks Uk ...

http://www.e-cigarette-forum.com/forum/notcigs/203486-vvpv-test-results-comments-5.html#post4497389

try that link; it's my review of the last beta; closest to what is coming out. I was lucky to get the final beta after the first two (plastic classics) went through the wars.
I did put some specs there.

 

[FAAmecanic]

I can tell you what it does, someone else will have to explain how it does it (would like to know that myself).

It's got a button on top of the PV, you push said button and it pumps 2 (I think it's 2) drops up from the bottle and down into the atty from the top via the drip tip.

Bottle is located on the left hand side under that there shiny cover, which is held on by magnets. The black button would (I assume) be the pump button with the white?/silver? button on the other side being the fire button.

The hose runs from the bottle through the top and up to the drip tip. You can't really see it in this photo but there is a vertical mounted dial that controls the VV function next to the silver (gawd, I hope it's silver ... please ) fire button.

All in all, it's a brilliant design ... at least I hope it is .. Mike, it had better be a brilliant design - LOL !!

Thanks VanZilla. So basically this is a Drip design, and will not use cartos? With my bad luck dripping lately I dont know if this is for me yet...must practice. I keep making a mess of my buzz trying to drip ..lol.

 

[Bovinia]

You could use cartos on it. You might even be able to sport the M1A1 tank on it and run the feeder tube into the fill port on the tank.

Hmmm, on second thought that might make a mess without some tinkering.

 

[markfm]

I've heard it can be used fine with cartos too. Sure hope so, since I ordered it with an 801 fitting for fusions

I think of it as providing a push button to top off a carto, though I may try a couple ikevape 801 atties on it too.

 

[mwa102464]

I dont see why you couldnt drill out pretty much any Delrin drip tip you wanted to use on it, I'm hoping to get a Trippy Tip made for mine ;-)

 

[5cardstud]

I've heard it can be used fine with cartos too. Sure hope so, since I ordered it with an 801 fitting for fusions

I think of it as providing a push button to top off a carto, though I may try a couple ikevape 801 atties on it too.

It will work fine with cartos. When used it with cartos I used the pump button to keep it topped off. With a little alteration you might be able to make a bottom feeder out of it and 'm betting someone has those plans in mind.

 

[Ruppy]

I dont see why you couldnt drill out pretty much any Delrin drip tip you wanted to use on it, I'm hoping to get a Trippy Tip made for mine ;-)

That would be sweet

 

[5cardstud]

I had to just get done buying a 2TB HDD + some other goodies for my pc so it's going to be awhile. She is nice though.

 

[markfm]

Do Isaac's 801 mini atomizers use a standard dt, do they would work with the vvpv?

 

[ukeman]

I've got a d/t on my i06 attys, by inverting the beige cap it comes with (snipping a little), it fits a 510/901 d/t....but i wonder if Buzz is producing the cap/adapter thingy he modeled before. ?
Anyway one can drill out a d/t, or make a delrin adapter to fit any d/t actual dripping if needed.

 

[markfm]

I'm figuring since I really like the fusions a native 801 makes sense, gotta believe the 801 atties should be nice too

 

[5cardstud]

Do Isaac's 801 mini atomizers use a standard dt, do they would work with the vvpv?

I used the 801 whistle tip on mine and I tested the VVPV with a mini 801. I had to use an adapter and put a hole in the whistle tip though.

 

[ukeman]

I'm figuring since I really like the fusions a native 801 makes sense, gotta believe the 801 atties should be nice too

heck I have a boatload of my favorite 901's, and the beta came with 901 connector...If i want to change my order to a 901 (again).... what's the best way to do that?

 

[mwa102464]

That would be sweet

You mean it WILL be sweet

As for a 306 I think drilling a Cannon tip should be easy or other 306 tips too

Same goes 801 Drip tips

5card or Uke, is there a fitting that goes into the whistle tip that the hose goes into ? or is it just hose into tip ? please ? thanks !

 

[ukeman]

You mean it WILL be sweet

As for a 306 I think drilling a Cannon tip should be easy or other 306 tips too

Same goes 801 Drip tips

5card or Uke, is there a fitting that goes into the whistle tip that the hose goes into ? or is it just hose into tip ? please ? thanks !

just a hose into tip unless Mike built an adapter that the d/t fit into... he did mock one up in a prior post here somewhere.

 

[Wharf Rat]

Mark a regular 801 DT won't fit on a IKV 801 mini. The bridge is to close to the top.

 

[BuzzKill]

heck I have a boatload of my favorite 901's, and the beta came with 901 connector...If i want to change my order to a 901 (again).... what's the best way to do that?

Email Terri ( tb@nanometer.com ) with the order # / name and what you want to change

 

[mwa102464]

Mark a regular 801 DT won't fit on a IKV 801 mini. The bridge is to close to the top.

You can use it though 2 ways, either dont push it all the way down and just until the oring goes in, OR, do what I did and take your dremel and Dremel out a grove where the Bridge touches the bottom of the 801 DT

 

[markfm]

Decisions, decisions. Wonder if I should change to 510, then, to be able to run io6 native, plus a 510/801 adapter for the fusions.

(gotta make an order change no matter what, pick up the spare bottle)

Any thoughts on a power supply extender cable?