Now she's excited about using the 510 ( the only thing she didn't like about the Blu was batty life ), but thank you for the offer on the pcc.
WANTS and NEEDS requests...
- Thread starter ToniAnne
- Start date
- th_trl_thread_readers 0
- Status
Now she's excited about using the 510 ( the only thing she didn't like about the Blu was batty life ), but thank you for the offer on the pcc.
did you get what you needed for your mixes????
if not I have some VG Id be happy to send you, if I'm not mistaken you can make your VG into a PG like consistency, by cutting with everclear or high % vodka, which will cut the thickness and still maintain a TH. If I am mistaken , I need to go back and re-read some posts!!!
I am a Watermelon juice freak. I would love to try your water/mint trial.... I do watermelon and lemon extract, holy crap it is so good I could just drink it!!!! pm me if ya need the vg!!! I even have some watermelon from Lorann's if ya need any in the future
Hi All - I haven't been around much lately :-(
Anyway - I need some chargers! I need a 901 or KR808 charger and an eGo charger. I would be happy to paypal you for the shipping and your efforts.
PLEASE PM me as I am not good about remembering to check threads.
THANK YOU
Anyway - I need some chargers! I need a 901 or KR808 charger and an eGo charger. I would be happy to paypal you for the shipping and your efforts.
PLEASE PM me as I am not good about remembering to check threads.
THANK YOU
Better decision going forward IMO. Lemma look through stuff, unfortunately most of my standard 510 stuff gets torn into to mod.Now she's excited about using the 510 ( the only thing she didn't like about the Blu was batty life ), but thank you for the offer on the pcc.
KarrMcDebt is graciously taking care of me for the VG. I haven't had any offers for PG yet. I am going to try a couple of various Watermelon flavors to see who's I like the best. I will definately keep you in mind when I finally mix some up. Just keep in touch and when I can finally do it I'll put you on the naughty/nice list, under nice of course LOL. Still lookin for some PG
Dragon: make sure they know, the blu atties will work on the 510 batts, but not to mix up the chargers and batteries (good way to kill the batts!) I speak from experience.
Vapin: I have some PG, if you need, PM me.
Sushi: wow.. I'd love to try using some of that extract. Want to trade? (and PG and VG have different effects as well as properties. YES, you can thin the VG, but the PG and VG do different things to the overall juice. VG adds vapor and sweetness, PG adds flavor and TH)
Vapin: I have some PG, if you need, PM me.
Sushi: wow.. I'd love to try using some of that extract. Want to trade? (and PG and VG have different effects as well as properties. YES, you can thin the VG, but the PG and VG do different things to the overall juice. VG adds vapor and sweetness, PG adds flavor and TH)
Dragon: make sure they know, the blu atties will work on the 510 batts, but not to mix up the chargers and batteries (good way to kill the batts!) I speak from experience.
Thanks Lbug
, first thing she asked was if she could use the usb charger from her blu. I warned her about the reversed polarities on the batts and told her to keep the blu batts for backup.
I want to know if these: AW 10440 battery are better than the same size batt at 600 mAh? And if they are better, what makes them better? Anyone?
mAh is milliampere-hour, which translates to how long it lasts from full charge to no charge. 600mAh will last almost twice as long as those 350mAh batteries you posted. Do you have a link to to the 600mAh ones?
But I keep reading how the AW or high drain batts are better and that a 10440 at 600mAh is truthfully only 350mAh anyway...listen, I do OK for a blonde, but what's up with that???
Pure I have my reservations on this subject. Sure battery quality differs on that we can all testify to from experience in life. But IMO there reaches a point where max capacity is achieved, that's why I can get a 12 volt battery for my ATV quite a bit smaller than I can for my car. Like I said, I have my reservations, so please don't take this post the wrong way. There are various reports on these particular batts being overrated, trust me when I say, I would love nothing more than to be proven wrong, but I'm having a hard time believing they can make a battery with nearly twice the capacity in the same size.
Feel the need to stress this even more, you've done a lot for this community, and I feel you are a very intelligent person, so what am I missing?
boB
DealExtreme: $5.08 TrustFire Protected 10440 "600mAh" 3.7V Rechargeable Li-Ion Batteries (2-Pack) and it even says there "- Product print '600mAh', the exact capacity is 350mAh" See why I'm confused? And "high drain"...I'm not really getting that either. Is it me?
Everything I've read about those is that they are indeed 350mAh....dunno how/why they are advertised at 600.
I to am curious what the new AW high drain are. Do they last longer, etc? What is it that makes them better.
I don't understand what mah they are saying.
From my understanding high drain will maintain 3.7v. While regular ones go from 4.2v - 2.75v.
So first puff and last puff will be 3.7v.
OK, wonderful! Thank you.
Yeah, that whole mAh thing on those batts is certainly confusing.
Well, that's why I asked for a link. Battery makers lie about the mAh I suppose. Often 600mAh batteries test to be only 350mAh. How long it lasts depends on what level of current is being drawn from it though.
The idea behind high drain is that the battery can put out more current than a regular one if needed. For example, if you use a low resistance atomizer with a high drain battery you might get up to pretty high levels of current. A regular battery will be unable to put out such high current and there may be less of an increase in current going from a regular atomizer to a low resistance atomizer. The high drain one wouldn't last as long because it's putting out more current.
I'm no battery expert, though. Bert is probably more correct.
The idea behind high drain is that the battery can put out more current than a regular one if needed. For example, if you use a low resistance atomizer with a high drain battery you might get up to pretty high levels of current. A regular battery will be unable to put out such high current and there may be less of an increase in current going from a regular atomizer to a low resistance atomizer. The high drain one wouldn't last as long because it's putting out more current.
I'm no battery expert, though. Bert is probably more correct.
So, it's likely that if I'm using a cartomizer with a 3.0ohm, I'm going to get basically the same performance and time of use from a high drain as I would the "600mAh"?
- Status
Similar threads
