- Status
No worries, unsure, we all do it from time to time.
I tend to fall down a lot..hence the foot in mouth makes it difficult to walk.
+1
... at least he knows how things are functioning or suppose to function, e.g no hidden little secrets in the tons of code preventing you to do this or that, and having to buy a key to unlock things that should have been part of the original package.
haha no foot in mouth
No but really, we were running extremely smooth at one point where a fairly strict daily regiment was needed. It was business in all it's meaning. Making the switch in April really kick started so many problems into motion and when we got to the breaking point. I just had to pull the plug. Power down, rip out the important the info and rebuild from scratch for execution. Speaking of, ever since last September,,or was it two Septembers' ago? no idea anyway started a device that was to be mechanical. and also started a concept where we unite the mechanical world with VV making an indestructible hybrid of sorts. So we were waiting for the machinist to finish his work so we can see where to install the amazing goodies (one that may never lead to a premature atty death indefinitely) I needed one more piece to finish the device, a spring, so ran out 4 or so hardware stores finding the right piece, found it, doesn't work as great as it should, there are remedies, so with more time for thought, it hit me that the entire idea of mixing the two worlds just can't happen. So now I have this 6 piece bottom button switch thats probably going to be scrapped for a more simplistic measure. I suppose the point in this mess of a story (sorry bad story teller ) is that alot of this is like surgery, we have to tear down and rebuild for perfection, because I won't accept any less for you guys and for IKV. From the palette of the site to the daily devices, I want to keep raising that standard. It's a small benefit f running the actual company alone. As for the IKV co in general. It is defintely being saved by all of you guys who are keeping the forum breathing without you guys, ikv would seriously be nothing from the method we're following.
Issac, I just wanted to grab your attention that I'm looking for an atty set up with a little length for my Provari that will give that all important th. I can wait so just bump me to the back of the line until the dust clear and when you have the time shoot me a message to discuss what set up will be appropriate.
Thanks and here's wishing you the best from Michigan.
SF (the lurker)
Thanks and here's wishing you the best from Michigan.
SF (the lurker)
No bumping Soul the lurker
I need to start focusing on one thing at a time instead of starting a billion projects altogether. It's such a hard practice!
Since TH is your mission, nothing can really beat a 510, next in line would be the io6 and 306. The latter may compromise a bit of TH but in exchange you get flavor and with the io6 you achieve conservation in terms of liquid. For the PVari you would want to stick around the 2.5-3.0Ω marker, you can exercise 3.5+ though. The current 510s I have in stock is the 1.5 1.8 2.5 (old ikv 510 model), 3.5 and 4.5. There is a new shipment waiting to be in transit too.
A quick note in regards to the io6, 7MM Calibers arrived yesterday and also the Special io6 Caliber DTs came in and so far they fit the Reo and PVari units very well.
Last edited:
On another vender's site, someone posted that they had just ordered some Ikenvape items for his bottom feeder. I have been puzzled for weeks especially about how one can just sit on inventory while still having to pay the manufacturer. It is none of my business how anyone chooses to do business. But I would just like an answer whether Ikenvape is open to some customers but not open to others? The whole situation has seemed quite strange for weeks. There are ways to do business which don't require all of this misfortune.
No, He don't work that way. There are other sites that sell Ikenvape products. As far as Isaac giving some customers special privledges I've not seen that happen.
I don't think he wanted all this to happen but it just kind of started like a snowball and one thing led to another until we ended where we are.
Last edited:
Since I want my first impression with Ikn to be the best possible, am I to understand from Isaac's previous post that the new type io6s are not yet received by him yet and he has now only the the originals? (not that they aren't good) If that is the case then waiting isn't so bad.
I am a CPA, and in fifteen minutes, I can come up with database system if Isaac can provide a payment system. I participated in the free market system long before computers controlled our lives. This has gone on for six weeks. Fortunately, I still have enough Fusions, but I want to buy some HR Fusions. And apparently, I was the only person who believed the original "1" beta test I06, and so I only got one. I should have ordered ten like others did.
There is no intent to create bigger soap opera than already exists, but Isaac's answers have been vague at best, and at this point all I can assume is that we have no clue when the Ikenvape site will be back up. I am a patient person, and I will wait for an email that the site is back up.
There is no intent to create bigger soap opera than already exists, but Isaac's answers have been vague at best, and at this point all I can assume is that we have no clue when the Ikenvape site will be back up. I am a patient person, and I will wait for an email that the site is back up.
No bumping Soul the lurker
I need to start focusing on one thing at a time instead of starting a billion projects altogether. It's such a hard practice!
Since TH is your mission, nothing can really beat a 510, next in line would be the io6 and 306. The latter may compromise a bit of TH but in exchange you get flavor and with the io6 you achieve conservation in terms of liquid. For the PVari you would want to stick around the 2.5-3.0Ω marker, you can exercise 3.5+ though. The current 510s I have in stock is the 1.5 1.8 2.5 (old ikv 510 model), 3.5 and 4.5. There is a new shipment waiting to be in transit too.
A quick note in regards to the io6, 7MM Calibers arrived yesterday and also the Special io6 Caliber DTs came in and so far they fit the Reo and PVari units very well.
And those Caliber Drip Tips do look SHWEEEEETTTTT if I do say so myself !
Thank you, I LOVE the pic, looks like a bullet on a bomb lol. I look forward to doing business once the dust settles, or whenever you decide. I'll be here.
SF (the lurker)
SF (the lurker)
Thanks, but they are especially designed to be used with the 7mm fitted with an IO6, not to be used as stand alones, well at least for the time being.
Like to see those available Switcher, can you make some ? also please dont forget about my long time ago PM on the 50Cal
Yes they can be made available if the demand exists, in limited quantities. I did not want to make 4 devices that were proprietary hence why the 7mm = 510 native connection. That being said, the IO6 came on the scene and I mfr a sample of IO6 drip tips than can be used (maintaining eGo ergonomics) on the 7mm. I have been informed that (we discussed) the bullet style drip tip will only be available as an option for folks acquiring a 7mm. The folks purchasing a 7mm will see their needs met. If the demand is strong enough, by all means more bullet shaped drip tips will be mfr and made available for the general public
Isaac, I'm pretty experienced with hosting, DNS, etc. I'd be happy to advise you free of charge if you need a hand.
Lord knows you've helped many others.
And no, I am no where near out of my IKV supplies - helps to keep a stockpile!
Lord knows you've helped many others.
And no, I am no where near out of my IKV supplies - helps to keep a stockpile!
If the demand is strong enough, by all means more bullet shaped drip tips will be mfr and made available for the general public
I'd buy one.
Sent from my SCH-I500 using Tapatalk
Last edited:
- Status
Similar threads
