I just got started vaping about 1 month ago. Since I wanted something small that I could carry in my shirt pocket at work for stealth vaping, I got a G6 starter kit from Halo. I have been using the mini tanks with the batteries and it works out pretty good for work. The two batteries and two tanks full last me through my shift. I found out rather quickly that I needed something else for use at home as both batteries would be dead shortly after getting off work. Also I wanted a glass clearomizer for use with some of juices known to mess up the plastic tanks. I got a Kanger Mini Protank 2 and a 650 mah Kanger EVOD battery. I absolutely love it! I got a stainless steel battery and the mini Protank sits on it seamlessly. It is smooth all the up to the drip tip. Sexy! I love the looks and the vape is much better than the G6, but that setup is too big for stealth vaping. I was looking at the mini egos and I am trying to find a clearomizer that will keep the profile as short as possible. I would rather have something with coils that I can rebuild. I haven't tried any yet, but I don't think rebuilding will be much trouble. I am an electrician and have everything I need to do this. The Kanger Mini T3's look like a good choice. Does anybody have any other suggestions?
What is a good short clearomizer for an Ego mini battery?
- Thread starter MoeBurns
- Start date
- th_trl_thread_readers 0
- Status
I think the shortest one I have is the evod clearo.
Kanger EVOD eGO Bottom Coil Clearomizer
This is basically a smaller T3S. The T3Ss are thin, but long.
Also check out the Vision Vivi Novas if you're looking for top coil. They aren't super huge either.
MINI Vision Vivi Nova Tank System - Plastic Tube
Kanger EVOD eGO Bottom Coil Clearomizer
This is basically a smaller T3S. The T3Ss are thin, but long.
Also check out the Vision Vivi Novas if you're looking for top coil. They aren't super huge either.
MINI Vision Vivi Nova Tank System - Plastic Tube
I would say iClear16 or almost anything "mini". I've used them all on mini eGos. (evod, mini vivi, Ce5, T3S even!)
I'm not sure, but anything called T3 would be avoided by me. T3S is good, but, as said, might be too big.
To be honest, Mini Protank is excellent too.
In addition to the good suggestions already given, take a look at the Kanger Mini T3s. It uses the heads for the T3s/Mt3s, which are NOT the same as the heads that are used in the EVOD/PT/Unitank. Kanger Mini T3s EgO Bottom Coil Clearomizer Tank System
Great suggestions already. Especially the Evods.
Smallest clear is probably something to the effect of a Vision Nano - not sure if those are any good or not? But, small for sure. Also there is the age old cartos - I have a few on hand that I can fill and use on my tiny battery for a super stealthy vape if needed.
Good luck on your quest!
Smallest clear is probably something to the effect of a Vision Nano - not sure if those are any good or not? But, small for sure. Also there is the age old cartos - I have a few on hand that I can fill and use on my tiny battery for a super stealthy vape if needed.
Good luck on your quest!
I would too, but rebuilding the iclear16 may be more work than its worth. If rebuilding is important, I would go for an Evod since you probably already have extra PT2 coils lying around.
Old thread sorry but on my topic, I found some Mini T3S and really like them. They are like T3S but slightly warmer, good flow and production. Not gotten around to trying a mini protank. However I run a lot of small ego unregulated, just got a pair from FT of 450 they are tiny. Had the button stick if pushed crooked but only couple times now it seems ok. Maybe qtip a little veg oil around the button. Cost is very low, will try an evod style 450 when I find one as the 650 I have works well. I don't like the 1100 I have they are huge. Been wanting a MVP for some time but keep going smaller lol. The 450 batteries are tiny and last me over half a day easy, then again a 650 lasts me almost 1.5 days if I run it dead, but most of the time I run 2-3 batteries since I have them for spares anyway.
Still running CE4S also they have good flavor, certain juice does not have flavor in the BCC for some reason, maybe too hot of coil? Latest is the GS-H3 they are one of the smallest and still hold 2ml, they are slightly shorter than the mini T3S, the drip tip is much shorter. Found if I drill the holes out a little and put a (I think it was a) Evod lower ohm coil in it, then it performs very close to the mini T3S for 1/3 the cost, well 1/2 including the coil. I used a jet drill set they are about 10 bucks for drilling brass carburetor jets. Have to say stock the GS is pretty good it just draws tighter like a CE4/etc not like a BCC. Vapor is good however, flavor seems the same as other BCC far as I can tell.
Also running some 550mah ego. My large batteries are VV but only seem to make a difference on some clearos, seems easy enough to adjust your draw for them though I imagine larger coils/duals need more power its just not ideal when I am on the go (most of the time). Did eye a 450 mah twist but it looks larger than a 650 standard.
I was looking at the Oval v6 but see little info about it. Seems smaller than the MVP. I could still use something like this on the weekends and at home. I like the itaste VW pieces but the tiny setups are just golden to use. I wish they made a shorter MVP style unit even if it only had 900 mah or so. Why can't someone make a gripper that takes clearos lol, not wanting to get into cartos too.
I've rebuilt the evod and CE coils with raw coils from FT, a bag of 50 is dirt cheap its just some fiddling around to get them in there right. I cut the extra wick off the old CE coils for flavor wicks. Seems to work well for now though I need to get some different ohm raw coils. Also use them on a small rda to flavor test, maybe will make some of my own later but no time now. Takes forever to get here but keep finding more gems at FT.
Still running CE4S also they have good flavor, certain juice does not have flavor in the BCC for some reason, maybe too hot of coil? Latest is the GS-H3 they are one of the smallest and still hold 2ml, they are slightly shorter than the mini T3S, the drip tip is much shorter. Found if I drill the holes out a little and put a (I think it was a) Evod lower ohm coil in it, then it performs very close to the mini T3S for 1/3 the cost, well 1/2 including the coil. I used a jet drill set they are about 10 bucks for drilling brass carburetor jets. Have to say stock the GS is pretty good it just draws tighter like a CE4/etc not like a BCC. Vapor is good however, flavor seems the same as other BCC far as I can tell.
Also running some 550mah ego. My large batteries are VV but only seem to make a difference on some clearos, seems easy enough to adjust your draw for them though I imagine larger coils/duals need more power its just not ideal when I am on the go (most of the time). Did eye a 450 mah twist but it looks larger than a 650 standard.
I was looking at the Oval v6 but see little info about it. Seems smaller than the MVP. I could still use something like this on the weekends and at home. I like the itaste VW pieces but the tiny setups are just golden to use. I wish they made a shorter MVP style unit even if it only had 900 mah or so. Why can't someone make a gripper that takes clearos lol, not wanting to get into cartos too.
I've rebuilt the evod and CE coils with raw coils from FT, a bag of 50 is dirt cheap its just some fiddling around to get them in there right. I cut the extra wick off the old CE coils for flavor wicks. Seems to work well for now though I need to get some different ohm raw coils. Also use them on a small rda to flavor test, maybe will make some of my own later but no time now. Takes forever to get here but keep finding more gems at FT.
I would go with the new mini aerotank if it were me. The adjustable airflow is nice on that unit!
Kanger Mini Aerotank - Sun-Vapers.com
Kanger Mini Aerotank - Sun-Vapers.com
It's possible to purchase an extension for the Gripper and use just about anything you like. I imagine some clearomizers would fit inside but they'd be a pain to remove imho.
- Status
Similar threads
- Locked
