What is the standard designation for these clearomizers?

Status
Not open for further replies.

gravitygroove

Senior Member
ECF Veteran
Verified Member
Jun 9, 2012
210
113
fenton
5pc 1.0ml KR808D-M3 Clearomizer


I got my order from healthcabin in with some ce2 clearomizers with the same profile as my volt 78mm battery, and a pack of the ones i posted the link of (larger diameter) and so far they both are preforming pretty well. My girlfriend seems to prefer the ones posted in the link, and i like that they are easier to fill, but am still undecided as to flavor and performance(its only been a couple days.)

I just was not sure, what these were called, exactly as a standardized "type."

(also trying Boges and Kangers side by side. So much to nail down!)
 

Mroutlaw

Ultra Member
ECF Veteran
Verified Member
May 13, 2012
2,556
2,033
Deerfield Beach, Florida
www.
5pc 1.0ml KR808D-M3 Clearomizer


I got my order from healthcabin in with some ce2 clearomizers with the same profile as my volt 78mm battery, and a pack of the ones i posted the link of (larger diameter) and so far they both are preforming pretty well. My girlfriend seems to prefer the ones posted in the link, and i like that they are easier to fill, but am still undecided as to flavor and performance(its only been a couple days.)

I just was not sure, what these were called, exactly as a standardized "type."

(also trying Boges and Kangers side by side. So much to nail down!)

It looks like a custom ce3. Kinda expensive though since its only 1ml. Is it wider than the volt 78mm? Can you post a picture of it with your volt?

Have you looked at the Phoenix from gotvapes? It is 1.5ml for the same price and they work really well on the volt products. You can also use them on the x2 and a sleeve will fit over them.

Personally, I don't like ce2. They require some modding to get them to wick properly and not leak


Sent from my iPad using Tapatalk HD
 

gravitygroove

Senior Member
ECF Veteran
Verified Member
Jun 9, 2012
210
113
fenton
Took a few pictures, but it's hard to tell kinda. The silver manual is the the ce2 (i guess?) also from healthcabin (i don't know the different between the ce2 and the new bottom coil pheonix)

IMG_2635.jpgIMG_2623.jpgIMG_2630.jpg
 

Mroutlaw

Ultra Member
ECF Veteran
Verified Member
May 13, 2012
2,556
2,033
Deerfield Beach, Florida
www.
Took a few pictures, but it's hard to tell kinda. The silver manual is the the ce2 (i guess?) also from healthcabin (i don't know the different between the ce2 and the new bottom coil pheonix)

View attachment 113714View attachment 113715View attachment 113716

The Phoenix is a ce3. The difference between a ce3 and ce2 is that in the ce2 the wires are exposed (this is on a top coil). In addition, the ceramic cup has a silicone cup seal around it instead of over it. There are some other differences too, but those are the the two major ones.

What you have there looks some something that was specially made for that company. It is not a normal width for an kr808 or a 510 mini battery.

Most companies sell products under their own brand name, for example gotvapes sells the ce3 as the Phoenix. Gotvapes works closely with the manufacturer to improve products and tinker with problems. Sometimes there are slight differences between theirs and the ones that other companies sell, but they are for the most part, the same.

As far as 808, gotvapes carries a lot of 808 products compared to other companies


Sent from my iPad using Tapatalk HD
 

gravitygroove

Senior Member
ECF Veteran
Verified Member
Jun 9, 2012
210
113
fenton
Yep, this is i guess too new to have a lot of info out there from others, but i'd be curious to hear some reviews. If anyone else has used these or sees youtube reviews or whatnot, i'm still curious what others think.

Compared to The ce2 xled i ordered, the vapor is warmer and it's production is better. I feel like my ce2's are really tight draw, which is annoying.
 
Status
Not open for further replies.

Users who are viewing this thread