Whats the smallest mechanical mod out there?

[Benzin]

I dont really need any more gear, but i want a very tiny mod just for giggles.
Whats the smallest (shortest) mechanical mod you guys have seen? Im talking with 18350 batts of course.

I would like something smaller than my coolfire1, considering its only 81mm tall i guess thats a tall order! hehe The only other requirement is that its compatible with "the kick" module.

 

[Benzin]

Update, im looking at the "bagua"
$16.74 Bagua Style Mechanical Mod - 1*18350 / stainless steel at FastTech - Worldwide Free Shipping
But i dont think its kick compatible as its only 18350, non telescopic.

Other candidates are the K100, and the KTS+

Anyone has a "smaller" idea?

 

[vapero]

if you want to use a kick you are going to be using it in 18500 mode
the nemesis or the gp paps are good candidates

 

[rm.o]

a k101 or k100 are both pretty tiny, i dont think theyre 8 cm tiny though

 

[Wow1420]

Red rod The Red Rod Mod by laslomos - YouTube

 

[Botomline]

I saw a custom mod from the Philippines. It takes a little battery about the size of a AA. Had a nice button on the side. Real expensive but they had a few from the same guy. Sorry, don't recall the maker's name.

 

[Bosco]

The sentinel clone from Fasttech (and I guess the real one, too) is really small. It's barely longer than the battery in it. It does work with a kick but only in 18350 mode because the kick has to be in the inner-tube to make contact. It's a full battery size smaller than my Magneto (ie - chentinel with 18500 is same size as magneto with 18350).

The microstick by Chels is probably the smallest one out there, overall - not kick compatible, though . .although I have heard of people getting them to work with the 18500 extender. I just got one and I feel weird recommending it at the same time as mine seems to have issues with the finish . . but finish aside, it's a really great mod. If you decide to get one you might need to be extra super careful with it to avoid it getting all scratched up.

 

[Wow1420]

Pisces clone in 18350 mode is 67.5mm
https://www.fasttech.com/products/0/10006090/1467801-pisces-telescopic-mechanical-mod

 

[Baditude]

The mechanical Gripper from Smoktech and Mad Vapes is only $10. Get the Gripper Extender ($4) to put something other than a 45mm carto on it. Uses an 18350 IMR battery. Impact-resistant molded plastic with rubberized finish. I love this dude for stealth vaping at the cinema.

 

[daleron]

The mechanical Gripper from Smoktech and Mad Vapes is only $10. Get the Gripper Extender ($4) to put something other than a 45mm carto on it. Uses an 18350 IMR battery. Impact-resistant molded plastic with rubberized finish. I love this dude for stealth vaping at the cinema.

View attachment 307934View attachment 307935View attachment 307939View attachment 307946

This ^^^^^^ Got one in the mail now from MadVapes myself, 10% off with code feb10off

 

[SpookyDriver]

For info, here is one of my Nemesis with 18350 with Kick ring.

 

[Benzin]

Thanks for your suggestions guys!

I like the gripper, but i cant put a kick on it

Right now, its a close call between the Pisces
$16.08 Pisces Telescopic Mechanical Mod - stainless steel at FastTech - Worldwide Free Shipping

and the Sentinel
$10.57 Sentinel M16 Style Telescopic Mechanical Mod at FastTech - Worldwide Free Shipping

hmmm... The sizes are virtually identical. I guess it will come down to build quality, reliability, etc.

 

[KenD]

The Origin is about 7 cms/2 2/3 inches. In hybrid mode with an Aqua RBA it's 12 cm/4 3/4 inches total. Should be possible to shave off 1/3 of an inch or so with a tiny drip tip.

Sent from my GT-I9100 using Tapatalk

 

[crxess]

Thought the SD KeyRing was the smallest

Perfect size for a Halfling Tank
eGo Mini vs SD Keyring: Compact Electronic Cigarette ShootoutSteve K's Vaping World

 

[Smoot]

Thought the SD KeyRing was the smallest

Perfect size for a Halfling Tank
eGo Mini vs SD Keyring: Compact Electronic Cigarette ShootoutSteve K's Vaping World

Wouldn't fall into the Mech mod category though.

 

[crxess]

Wouldn't fall into the Mech mod category though.

But it could easily enough
Now where I put that Hammer, Drill, Bits and Chisel?

 

[John_]

For info, here is one of my Nemesis with 18350 (no kick ring). Kick ring adds ~1/2" or so.

That silver ring above the engraved tube is the kick ring by the way. What you have would fit a kick and an 18350. The kick ring/tube is meant to be added on to your existing tube configuration, then you add the kick and drop one battery size. The Nemesis can fit an 18350 with no extension tubes... (I have one and have done it)

Nemesis in it's 18350 configuration. I don't have a ruler on hand but the green battery is a Sony US18650VTC3 which is about 65mm tall and it is taller than the nemesis in it's 18350 mode.

Add the first two tubes (kick ring and the 18490 extension) and it will fit a kick and an 18350. Add the first tube and the last tube and it will fit an 18490 and a kick, add all of them and it will fit an 18650 and a kick.

EDIT: and keep in mind, the Omega has a fairly long positive pin so with a lot of other devices, this setup would be even shorter.
EDIT2: oh and I know she needs some cleaning, I was actually planning on doing it this weekend.

 

[Benzin]

aaand the winner is....
$17.29 Atom Style Telescopic Mechanical Mod - 1*18350/18500/18650 at FastTech - Worldwide Free Shipping
59mm height!! telescopic (so i assume i can fit the kick), and steel instead of aluminum.

What you guys think?

 

[Eros]

Just want to share my smallest mech mod. It is clone. Cheap. Very good in firing. Smooth button. Kick? No problem.

 

[Benzin]

Just want to share my smallest mech mod. It is clone. Cheap. Very good in firing. Smooth button. Kick? No problem.
View attachment 308037

that looks nice! what's its name?