Will KR808D-1 Cartomizers work on "901/808 Atomizer Connector"

[Tracker II]

I think the title says it all but anyway, I see PV's advertised with 901/808 Atomizer Connectors. I assume that the KR808D-1 Carto's will work on these connectors even though they are not stand alone atomizers. Could someone confirm this before I place my order? I'm 90% sure it's OK, but I don't want to unwrap my new package and then have one of those "oh crap!" moments. Thanks much.

 

[Annie Miller]

I don't know about the 801's but the 901s I have the the kr808d-1s don't work on no enough air flow.
there is an kr808 to 901 adapter I think good prophets caries them and a couple other places

fyi the 901 atomizer works great on the kr808 battery with no adapter needed

 

[CES]

I just posted this on your other thread too...

They should work with the 901/808 connection. If you have batteries with a 510 connection you can also get a 510 battery to 901/808 atomizer adapter (madvapes). The 901 and 808 have the same threads, but not all 901 adapters work with cartomizers, so make sure they specify both 901/808.

 

[Buzzy]

The KR808D-1 connector and the 901 connector are identical and - mostly - interchangeable. I use a 510, so I'm not absolutely certain of this but...the airflow of a 901 atty is partly dependent on a hole that is actually above the connector. So 901 atty on 808 batt - no problem. But the connector on a KR808D-1 carto is dependent on airflow through the connector. So 808 carto on a 901 batt - airflow problems that really can only be answered with an adapter.

At least, that's what I remember reading. I did use KR808D-1s when I first started an ecig, and I put a 901 atty on it with no problems.

 

[markfm]

There are some vendors who sell a nominal "901" that actually does have the proper slots for 808 airflow. As always, if it is a particular PV, an e-mail to that vendor to confirm is a good thing; they should be able to answer, clearly, if an 808 carto works OK on the battery.

 

[floridamale]

If it states 901/808 connector for the battery they will work, if its just a 901 connector they won't. The straight 901 connector is not vented to use an 808 carto, you would need a 901/808 adapter.

 

[Marcutio311]

hope this works out well, I got the buzzpro coming in with a 808 connection, and the vids said you can use a atomizer or cartomizer but the connection end is huge, and I dont see how a little cartomizer will fit on it. I hope Im just not seeing it right lol.

 

[dormouse]

It depends. If the carto is some kind with no slot cut across the center post AND the battery post has no slot cut across the post then you may need an adapter to provide airflow for the carto. If just the battery has a slotted post the carto should get air. If only the carto has the slotted post, it should get some air if the carto slot is cut well.

I believe the Riva 901 at Liberty-Flights is the Eastmall version and has the slotted post but the SLB version at LiteCigUSA.net does not. The PigCig has a slotted post. I don't know what kind of atomizer socket post the mod builders use.

I know Vapor4Life cartos, SmokelessImage cartos and Boge KR8 (302D) cartos have slotted posts. I think the leCig D1 cartos and VaporNine's torrent or whatever they call them cartos do not have a slotted post.

 

[Marcutio311]

I should be aight cuz the site said it was str8 for 808 cartos so it better be lol.

 

[Marcutio311]

Ahh just got emailed back from notcigs and he says it works fine, i dunno how this is cause it doesnt looks like a lil carto would fit into the huge open connection, but I guess I just gotta see it when i go home friday and unwrap it.

 

[Marcutio311]

ty dor for always being around somewhere to pop in and give info hehe